NUMBER FUNCTION
1 Touch screen display
2 Hole for passage of communication cable
3 4 Holes for fixing the cover to the wall
4 System to fix the display frame to the cover
1. Remove the display frame.
2. Position the back cover on the wall chosen for installation. Take the point references
where the holes for the fixing screws (diameter 3 mm) and the communication cable
passage hole (minimum diameter 7.2 mm) are to be made.
3. Drill the holes and screw the back cover to the wall using the supplied screws. Be
careful that once tightened, the screws do not protrude beyond the countersinks.
4. Pass the communication cable through the specially-drilled hole and insert it gently
into the connector on the display circuit board.
DO NOT FORCE THE CONNECTOR.
The connector has an
obligatory direction that must be
followed.
cover and release it.
