PFC0300-24CH10S – 24V 10A
Description Technical Features
Input voltage 100VAC – 240VAC ±10% Universal
Frequency 50Hz - 60Hz
Output - Boost Charge 28,8V (2,4V/Cell)
Output - Float Charge 27V - 27,8V (2,27V/Cell)
Output current 10A ±0,5A
Short-circuit protection Auto reset at the end of short-circuit condition
Reverse polarity protection Auto reset at the end of reverse polarity condition
Additional protections Safe connection without sparkles on output and input
Thermal protection against overtemperature
Dimensions L145 x W128 x H56.5 mm
Weight 1,33kg (cables excluded)
PFC0360-24CH12S – 24V 12A
Description Technical Features
Input voltage 100VAC – 240VAC ±10% Universal
Frequency 50Hz - 60Hz
Output - Boost Charge 28,8V (2,4V/Cell)
Output - Float Charge 27V - 27,8V (2,27V/Cell)
Output current 12A ±0,5A
Short-circuit protection Auto reset at the end of short-circuit condition
Reverse polarity protection Auto reset at the end of reverse polarity condition
Additional protections Safe connection without sparkles on output and input
Thermal protection against overtemperature
Dimensions L208 x W111 x H56 mm
Weight 1,56kg (cables excluded)
11
3. CHARGING CURVE SELECTION
Before installing and using the charger, please set the most suitable charging curve
according to the type of battery to be charged; the device is equipped with DIP-
SWITCH to select various charging curves, as shown in the following table:
DP1 DP2 PHASES DESCRIPTION
OFF OFF IUIa - AGM For AGM batteries
OFF ON IUIa - Acd For Lead Acid Flooded traction batteries
ON OFF IUUa
Generic curve for GEL and AGM batteries
(Default setting)
ON ON IUIa - GEL For GEL and all Lead Acid Flooded batteries
The DIP-SWITCHES are behind a black plastic cover on the front panel of the
device, so in one of the two shorter sides.
In some models, there are 4 DIP-SWITCHES but it should be considered only the
first two on the left, the other two are of no use.
4
