170484
91
Zoom out
Zoom in
Vorherige Seite
1/266
Nächste Seite
User Guide
91
www.nec-computers.com
Logical Drive Problems
While disk drives are highly reliable, on occasion a disk drive can fail. Faulttolerant
(RAID 1, 5 and 10) logical drives go Critical when a disk drive fails. Non fault-tolerant
logical drives (RAID 0) and JBOD go Offline when a disk drive fails.
When a fault-tolerant logical drive goes Critical, one of two things must happen in
order to restore the logical drive to Functional status:
If a hot spare drive is available, the FastTrak Controller will automatically begin
rebuilding the logical drive with the hot spare. You must replace the failed drive,
which becomes the new hot spare.
If a hot spare drive is not available, you must replace the failed drive, after which
the FastTrak controller will automatically rebuild the logical drive.
In either case, you must identify the failed drive so you can replace it.
When you boot your system, the FastTrak BIOS screen informs you if there is a critical
or offline logical drive. If you enabled the Halt On Error option, your system will stop
booting at this point.
1. Press Ctrl-F to access the FastBuild utility.
2. From the Main Menu screen, press 3 to see the Define LD Menu.
3. Press the up and down arrow keys to select the logical drive with Critical
status and press Enter.
The Define LD Menu for the Critical logical drive displays.
In the Define LD Menu screen, compare the number of drives assigned to the
logical drive (Total Drv) with the disk drives listed under Drive Assignments.
RAID 0 and JBOD
Because RAID 0 and JBOD logical drives are not fault-tolerant, there is no way to
rebuild the logical drive when a disk drive fails. After you replace the failed disk drive,
you must create a new logical drive and copy your data to it from a backup source.
Note: Please refer to the FastBuild online documentation for
more information.
91

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Nec express5800 tm800 nl wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info