170484
211
Zoom out
Zoom in
Vorherige Seite
1/266
Nächste Seite
User Guide
211
www.nec-computers.com
- Is the [Partition Size] specified by the value larger than the real area? If you
want to create one partition in all area of the hard disk (excluding the mainte-
nance area) to install the OS, specify [All Area].
Windows 2000 started with different display resolution from the specified value.
- If the specified display resolution can not be used, the system will use the near-
est value or the default value of the driver.
Entered the incorrect Product ID/CD key.
- Even if you entered the incorrect Product ID/CD key, Express Setup will start.
However, the setup will stop and asks you to re-enter the correct value. Also in
this case, input request will occur when rebooting after GUI setup completed
during Express Setup. If these 2 inputs are done correctly, there is no problem
on Windows 2000 setup.
Unable to specify the details of Network adapter.
- In Express Setup, you can not specify the details of Network adapter. Specify
them from Control Panel after starting Windows 2000.
Windows 2000 is started with Network adapter that has not been specified during
Express Setup
- Windows 2000 will install the recognized Network adapter specified as default
value. If you want to modify the specification, it can be done from Control
Panel after starting Windows 2000. Also, the Network adapter that has been
specified during Express Setup but that is not connected will not be setup,
though the protocol will only be installed.
Connected more than two Network adapter and specified different protocol for
each adapter, but all the protocols are specified on either adapter.
- It's a design. Each adapter is specified so that all the installed protocols can be
used. The value that can not be specified during Express Setup will all be speci-
fied by default value.
When more than two Network adapter are specified, the detailed specification of
TCP/IP protocol are all set to use DHCP.
- When more than two Network adapter are specified, the detailed specification
of the protocol may all be set by default value. Re-specify the details from Con-
trol Panel.
Not more than two Network adapter is connected, but the detailed specification of
the protocol are all set by default.(e.g. Specified IP Address on TCP/IP, but DHCP
is specified)
- Are you specifying more than two protocols? In this case, the situation will be
the same as connecting more than two Network adapter, so the detailed specifi-
cation of the protocol are all set by default. Re-specify the details from Control
Panel after starting the OS.
211

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Nec express5800 tm800 nl wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info