Bedienungsanleitung Nec GT 5000 (Seite 114 von 115) (Englisch)

493541

114

Zoom out

Zoom in

Vorherige Seite

1/115

Nächste Seite

10-12

⁄0 Operation Using an HTTP Browser

Overview

The use of HTTP server functions will allow control of the projec-

tor from a web browser without the installation of special soft-

ware. Please be sure to use “Microsoft Internet Explorer 4.x” or a

higher version for the web browser. (This device uses “JavaScript”

and “Cookies” and the browser should be set to accept these

functions. The setting method will vary depending on the version

of browser. Please refer to the help files and the other informa-

tion provided in your software.)

NOTE:

* The use of HTTP server functions is not available during Standby mode.

* The display’s or button’s response can be slowed down or operation may not be

accepted depending the settings of your network. Should this happen, consult

your network administrator.

* The projector may not respond if its buttons are repeatedly pressed in rapid

intervals. Should this happen, wait a moment and repeat. If you still can’t get any

response, pull out and then re-insert the LAN card.

* Do not use the HTTP Server functions and the Dynamic Image Utility included on

the supplied CD-ROM. Using both at the same time may result in a connection

failure or slow response.

Access is gained to the HTTP server functions by specifying

http:// <the projector’s IP address> /index.html

in the entry column of the URL.

Preparation Before Use

Make network connections and set up the projector and confirm

that it is complete before engaging in browser operations. (See

“LAN Mode” on page 8-19.)

Operation with a browser that uses a proxy server may not be

possible depending on the type of proxy server and the setting

method. Although the type of proxy server will be a factor, it is

possible that items that have actually been set will not be dis-

played depending on the effectiveness of the cache, and the con-

tents set from the browser may not be reflected in operation. It is

recommended that a proxy server not be used unless it is un-

avoidable.

Handling of the Address for Operation via a Browser

Regarding the actual address that is entered for the address or

entered to the URL column when operation of the projector is via

a browser, the host name can be used as it is when the host

name corresponding to the IP address of the projector has been

registered to the domain name server by a network administra-

tor, or the host name corresponding to the IP address of the pro-

jector has been set in the “HOSTS” file of the computer being

used.

Example 1: When the host name of the projector has been set to

“pj.nec.co.jp”, http://pj.nec.co.jp/index.html is specified for the

address or the entry column of the URL.

Example 2: When the IP address of the projector is

“192.168.73.1”, access is gained to the HTTP server func-

tions by specifying

http://192.168.73.1/index.html for the address or the entry

column of the URL.

Structure of the HTTP Server

Power: This controls the power of the projector.

On ............... Power is switched on.

Off ............... Power is switched off.

Volume: This controls the volume of the projector.

̆ ................. Increments the volume adjustment value.

̄ ................. Decrements the volume adjustment value.

Mute: This controls the mute function of the projector.

All On .......... Mutes each of the video, audio, and on-screen

display functions.

All Off ..........Cancels the muting of each of the video, audio,

and on-screen display functions.

Picture On ... Mutes the video.

Picture Off ... Cancels the video muting.

Sound On .... Mutes the audio.

Sound Off .... Cancels the audio muting.

OSD On ....... Mutes the on-screen display.

OSD Off ....... Cancels the muting of the on-screen display.

Picture: Controls the video adjustment of the projector.

Brightness ̆ Increments the brightness adjustment value.

Brightness ̄ Decrements the brightness adjustment value.

Contrast ̆ ... Increments the contrast adjustment value.

Contrast ̄ ... Decrements the contrast adjustment value.

Color ̆ ........ Increments the color adjustment value.

Color ̄ ........ Decrements the color adjustment value.

Hue ̆ .......... Increments the hue adjustment value.

Hue ̄ .......... Decrements the hue adjustment value.

Sharpness ̆Increments the sharpness adjustment value.

Sharpness ̄Decrements the sharpness adjustment value.

* The functions that can be controlled will vary depending on the signal

being input to the projector.

10. Appendix

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec GT 5000 Seite 114

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nec GT 5000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info