Bedienungsanleitung Nec gt6000 (Seite 62 von 115) (Englisch)

216054

Zoom out

Zoom in

Vorherige Seite

1/115

Nächste Seite

6-10

<Problem> The projector cannot be found with "General search". (IEU 1.0)

Check Points Countermeasures

Are the wireless LAN settings appropriate?

Are the channel numbers for the personal computer and the

projector set to the same number?

When WEP (encryption) has been set, has the same value been

set for both the personal computer and the projector?

Please check the access points, the personal computer setting

values and the projector [LAN Mode] setting values.

When using the infrastructure or 802.11 Ad Hoc, please set to

the same character string since SSID distinguishes between

upper and lower case characters.

Are radio communication conditions satisfactory? Check whether there are obstacles located between the

access point and the personal computer. Try moving the

personal computer closer to the access point.

Are the TCP/IP settings (e.g., IP address, sub net mask, etc.) of

the personal computer and the projector correct?

Check whether the network settings are within the same

segment.

Are more than one network interface cards (NIC) being used

with the same computer?

Set only the network interface card (NIC) that is connected to

the projector to "Valid".

For a network card that is not connected to the projector, click

the network card name under "Control Panel" Ǟ "System" Ǟ

"Device Manager" Ǟ "Network Adapter" and then click

[Properties (R)] and set the device usage to "Not used".

<Problem> Sometimes it takes a long time for screen transmission from the personal computer to the

projector. (IEU 1.0)

Check Points

Countermeasures

•Transmission time may be long depending on the image

pattern.

• When screens are sent to multiple projectors simultaneously,

a larger number of projectors will result in longer transmission

times.

• The transmission time may vary depending on the network

environment.

• The transmission time may vary depending on the perfor-

mance of the personal computer as well as other application

software that is running at the same time.

Transmission time will be longer when the resolution of the

personal computer and that of the projector differ since there

will be an increase in resolution conversion processing.

We recommend that the resolution of the personal computer

and that of the projector be set to the same setting value

(except GT6000).

The resolution of GT5000, MT1065, MT1060, LT260, LT240,

LT260K, LT240K and WT600 are 1024 x 768 dots.

The resolution of LT220 and MT860 are 800 x 600 dots.

Select the resolution to 1024 x 768 on your PC for sending an

image to GT6000.

<Problem> Cannot follow the screen switching processing of the PowerPoint slide show, etc. (IEU 1.0)

Check Points

Countermeasures

Smooth screen switching processing or animation effects

cannot be followed because in Image Express Utility 1.0, the

screen condition of the personal computer is sent to the

projector at a fixed time interval.

Use the software with " the PowerPoint screen switching

effects, animation effects, and other settings set to "None".

6. Using the Projector in a Network

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec gt6000 Seite 62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nec gt6000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info