Bedienungsanleitung Nec gt6000 (Seite 68 von 115) (Englisch)

216054

Zoom out

Zoom in

Vorherige Seite

1/115

Nächste Seite

7-5

7. Setting Up for Double Stacking in Link Mode

x Adjusting and Registering Signals to Be

Projected

x-1. Display a desired input signal on the master projector.

x-2. Make adjustments to the signal, then save (register) adjust-

ments on the master projector by pressing and holding CTL

and pressing ENTRY LIST button on the remote control.

x-3. Repeat steps x-1 and x-2 for all signals you want to project.

Display all the signals you registered and check. To check, select

[Source Select] → [Entry List].

x-4 Transferring Signal Data in the Entry List

x-4-1. Transfer the data from the master projector to the slave

projector so that both the projectors have the same data in

memory.

x-4-2. Select [Projector Options] → [Link Mode] on the mas-

ter projector.

x-4-3.Select [Entry List Copy] and press the ENTER button.

The following will be displayed.

x-4-4.Select [OK] and press the ENTER button.

The data has been transferred from the master projector to

the slave projector.

x-5.Making Adjustments to the Slave Projector

x-5-1. Display a desired input signal on the slave projector.

x-5-2. Make adjustments to the signal, then save (register)

adjustments on the slave projector by pressing and holding

CTL and pressing ENTRY LIST button on the remote con-

trol.

x-5-3. Repeat steps x-2 and x-2 for all signals you want to

project.

Display all the signals you registered and check. To check,

select [Source Select] → [Entry List].

c Adjusting the Lens Shift, Zoom and Fo-

cus to Clearly Display all projected patterns

c-1. Display the internal crosshatch test pattern.

NOTE: Use a different single color for each projector. Example: Turn on Green of

master projctor, then Red of the slave projector.

c-2. Adjust the Lens Shift by pressing and holding CTL and press-

ing the POSITION button on the remote control.

For lens shift adjustable range, see page 2-4 and 2-5. Lens

Shift Adjustable Range.

c-3. Zoom the lens in and out by pressing and holding CTL and

pressing the MAGNIFY(ZOOM)+/- button on the remote con-

trol.

c-4. Adjust the lens focus by pressing and holding CTL and press-

ing the FOCUS +/- button on the remote control.

NOTE: If the physical (vertical) alignment of the projector is not correct, adjust the

height of the feet. If there is any keystone distortion, use 3D-Reform (Keystone)

adjustment to correct and save the settings on each projector. See page 3-4 for 3D-

Reform correction.

v Link Mode Setting

v-1. Set the Link Mode on each projector.

NOTE: Be sure to set the Link Mode on the slave projector before the master pro-

jector. If you do this first on the master projector, you will not be able to set the Link

Mode on the slave projector.

v-1-1. Select [Projector Options] → [Link Mode] → [Settings].

v-1-2. First select [Slave] on the slave projector.

v-1-3. Select [Master] on the master projector.

v-2. Projecting a Source Image from both the Projectors.

v-3. Display any signal onto the screen.

v-4. Check to see if the images on the master projector are dis-

played in synchronization with the ones on the slave projector

while the projectors are in Link Mode.

NOTE: Registering signals is not possible in the Link mode. To register a signal,

first set "Link Mode" to "Standalone" on the menu and then repeat the steps from

“

Adjusting and Registering Signals to Be Projected”. If you select an unregis-

tered signal, the master projector displays the image, but the slave projector doesn't.

To view the information on the currently displayed signal, select [Help]

→

[Source

Information].

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec gt6000 Seite 68

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nec gt6000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info