Bedienungsanleitung Nec HT1000 (Seite 28 von 61) (Englisch)

493570

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

E-28

Auto Play Mode

If the "Auto Play" option is selected in "Viewer Options" of the menu,

any given slide will start to play automatically.

You can also specify Auto Play Interval between 5 and 300 seconds.

Switching to Slides Directly from Other Input Modes

With this function it is possible to switch directly to a slide when the

picture of a VCR or computer is being projected.

Example: When conducting presentations using a combination of slides

and moving pictures from a VCR, etc., it is possible to switch from a

Viewer slide to the video picture then back to the Viewer slide simply by

using the Viewer button.

NOTE: Even if you switch the current Viewer source to another source, the cur-

rent slide is retained. When you return back to the Viewer, you will get the slide

that has been retained.

Viewing Digital Images

Digital images can be played with the Viewer if the following conditions

are met:

• If the image can be stored on an MS-DOS format PC card

• If the image can be stored in a format supported by the Viewer. With

the Viewer, images on the card are searched for in directories and

images in JPEG or BMP format are recognized as slides. Searchable

directories are directories within two steps from the root directory,

and searchable images are images within the first 12 files in the di-

rectory. Only file and slide switching are possible.

NOTE: The maximum number of images recognized as slides within one direc-

tory is 128.

Storing Images Displayed on the Projector on the PC

card (Capture)

The Capture features allows you to capture an image from a source that

is currently being displayed. The image is saved as JPEG in the PC

card. When you select Capture from the menu, you will get a tool bar.

You can capture an image directly using the tool bar when the menu is

not displayed.

NOTE:

* Signals from DVI input are not possible to be captured.

* Unless a PC card is inserted into the PC Card slot of the projector, the Capture

feature is not available.

* The "Card Error" display means that the free space of the PC card is insufficient

for saving images. Make more space available on the card by erasing un-

wanted images with your PC. The number of images that can be captured

depends on the size of the PC card.

* Be sure not to turn off the power or remove the PC card while capturing an

image. Doing so could cause a loss of the data in the PC card or damage to the

card itself.

Preparations:

Insert the PC card into the card slot.

Insert the PC card so that the end with the insertion direction arrow

on the top goes in first.

* Press the eject button to eject the card.

1. Project the image you wish to store on the projector.

2. Select the "Capture" from the Tools menu.

Freeze

Exit

Capture

3. A tool bar will appear.

The tool bar includes the following buttons:

Capture ....... Captures an image and save it as a JPEG file in a PC

card.

Freeze ......... Freezes and unfreezes images.

Exit .............. Exits the Capture function. Another option to exit the Cap-

ture function is to press MENU or CANCEL button on the

remote control or projector cabinet.

NOTE:

You can compress a captured file (JPEG) using the Capture Options in the Setup

dialog. See page E-41.

Captured images with higher resolution than the projector's native resolution

cannot be displayed correctly.

• File size of the captured image varies depending on the resolution of an input

signal.

• An hourglass indicating that an image is being captured appears on the

projector's display. Do not eject the PC card or turn off the projector's power

while this icon is displayed. Doing so will damage the PC card data. If the PC

card data is damaged, use a computer to repair the data.

• Up to 12 indexes can be displayed on the list of folders. The folder in the right

bottom is always a folder exclusively for captured images, but is only dis-

played when images have been captured.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec HT1000 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info