Bedienungsanleitung Nec HT1000 (Seite 36 von 61) (Englisch)

493570

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

E-36

Entry Edit Command

Image Options

Selecting Aspect Ratio (not available for Viewer)

Aspect Ratio allows you to select the best Aspect mode to display

your source image.

When screen size 4:3 is selected for the source, the following selec-

tions will display:

Normal ........... Standard 4:3 Aspect

Zoom ............. All 4 sides stretched

Cinema .......... Top and bottom reduced to display with black bor-

ders on top and bottom. Available for 4:3 only

V-Zoom .......... Top and bottom stretched. Available for 4:3 only

When screen size 16:9 is selected for the source, the following selec-

tions will display:

Normal ........... 16:9 image displayed in 4:3 mode

Full ................. Stretched to display in 16:9 aspect ratio. Available for

16:9

Zoom ............. All 4 sides stretched

Stadium ......... Non-linearly stretched. Available for 16:9 only

NOTE: You can adjust image positions vertically for source with black bor-

ders. See page E-43 for setting image positions.

Please note that using this projector for the purpose of commercial gain or

the attraction of public attention in a venue such as a coffee shop or hotel and

employing compression or expansion of the screen image with a "Aspect

Ratio" or "Screen" setting may raise concern about the infringement of copy-

rights which are protected by copyright law.

NOTE: During 3D Reform adjustment, "Aspect Ratio" may not be available.

Should this happen, first reset the 3D Reform data and then do setting again.

Second repeat the 3D Reform adjustment.

Changing the aspect ratio can limit 3D Reform in its adjustable range.

You can edit signals on the Entry List.

Load ............... Enables you to select a signal from the list.

Store .............. Enables you to store the currently projected signal.

Cut ................. Enables you to remove a selected signal from the list

and place it on the "clipboard" in the projector.

Copy .............. Enables you to copy a selected signal from the list

and place it on the "clipboard" in the projector.

Paste .............. Enables you to paste the signal placed on the "clip-

board" to any other line of the list. To do this, select

"Paste" and then select the line number you want to

paste to. Last press ENTER.

Edit ................ Enables you to change source names or add source

names to "More" in the Sorce Select.

Source Name ..

Enter a signal name. Up to 18 alpha-

numeric characters can be used.

Input Terminal ..

Change the input terminal. Video and

S-Video are available for composite

signal.

Source List ..... Set signal selection method.

Lock ............... Set so that the selected signal can-

not be deleted when "All Delete" is

executed.

Skip ................ Set so that the selected signal will be

skipped during auto search.

When complete, select OK and press ENTER. To exit

without storing setting, select Cancel. Select "Source

Name" and press ENTER to display the Source Name

Edit window. You can change source name on this

window. Press [̄] to display the software keyboard,

which you can enter alphanumeric characters. See

page E-56 for the key function of the software key-

board.

All Delete ....... This feature enables you to delete all the registered

signals in the Entry List.

The following buttons are not available for the currently projecting

signals:

1) The Cut and Paste buttons on the Entry Edit Command screen

2) The Input Terminal button on the Entry Edit screen

NOTE: When all the signals in the Entry List are deleted, the currently pro-

jected signal will be also deleted except locked signals.

Volume

Controllling Volume

Adjusts the sound level of the projector speaker.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec HT1000 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info