Bedienungsanleitung Nec L102W (Seite 5 von 66) (Englisch)

573280

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

iii

English ...

Important Information

Fire and Shock Precautions

• Ensure that there is sufcient ventilation and that vents are unobstructed to prevent the build-up of heat

inside your projector. Allow at least 4 inches (10cm) of space between your projector and a wall.

• Do not try to touch the exhaust vents as it can become heated while the projector is turned on and immedi-

ately after the projector is turned off.

• Prevent foreign objects such as paper clips and bits of paper from falling into your projector. Do not at-

tempt to retrieve any objects that might fall into your projector. Do not insert any metal objects such as a

wire or screwdriver into your projector. If something should fall into your projector, disconnect it immedi-

ately and have the object removed by a qualied service personnel.

• Do not place any objects on top of the projector.

• Do not touch the power plug during a thunderstorm. Doing so can cause electrical shock or re.

• The projector is designed to operate on a power supply of 100-240V AC 50/60 Hz. Ensure that your power

supply ts this requirement before attempting to use your projector.

• Do not look into the lens while the projector is on. Serious damage to your eyes could result.

• Keep any items (magnifying glass etc.) out of the light path of the projector. The light path being projected

from the lens is extensive, therefore any kind of abnormal objects that can redirect light coming out of the

lens, can cause unpredictable outcome such as a re or injury to the eyes.

• Do not block the light path between the light source and the lens with any objects. Doing so could cause the

object to catch on re.

• Handle the power cord carefully. A damaged or frayed power cord can cause electric shock or re.

- Do not use any power cord other than the one supplied.

- Do not bend or tug the power cord excessively.

- Do not place the power cord under the projector, or any heavy object.

- Do not cover the power cord with other soft materials such as rugs.

- Do not heat the power cord.

- Do not handle the power plug with wet hands.

• Turn off the projector, unplug the power cord and have the projector serviced by a qualied service per-

sonnel under the following conditions:

- When the power cord or plug is damaged or frayed.

- If liquid has been spilled into the projector, or if it has been exposed to rain or water.

- If the projector does not operate normally when you follow the instructions described in this user’s

manual.

- If the projector has been dropped or the cabinet has been damaged.

- If the projector exhibits a distinct change in performance, indicating a need for service.

• Disconnect the power cord and any other cables before carrying the projector.

• Turn off the projector and unplug the power cord if the projector is not to be used for an extended period

of time.

• Do not send the projector in the soft case by parcel delivery service or cargo shipment. The projector inside

the soft case could be damaged.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec L102W Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info