Bedienungsanleitung Nec LT140 (Seite 11 von 43) (Englisch)

493579

Zoom out

Zoom in

Vorherige Seite

1/43

Nächste Seite

E–11

function remote control only.

6 Enter Button

Executes your menu selection and activates items selected from

the menu.

7 Magnify Button

Use the (+) or (–) button to adjust the image size up to 400%.

When the Pointer is displayed, the magnified image is displayed at

the center of the Pointer. When the Pointer is not displayed, the

magnified image is displayed at the center of the screen.

8 Pointer Button

Press this button to display one of the eight pointers; press again to

hide the pointer.

9 Picture Mute Button

This button turns off the image and sound for a short period of

time. Press again to restore the image and sound.

10 Help Button

Provides information about operation and adjustment procedures

or the set information for the current menu or adjustment during

menu operation. This also displays information how to use the Help.

Wireless Full Function Remote Control (Optional)

You can use your optional full function remote control wireless to

operate your projector.

With the mouse output port connected to your computer, you can

also use the projector’s remote control to operate your computer’s

mouse wireless. (See page E-16 to connect your computer to the mouse

output port.)

NOTE: If you are using a Macintosh computer, you can click either

the right or left button to activate the mouse.

11 Power On And Off

If power is applied, you can use this button to turn your projector

on and off.

NOTE: To turn off the projector, press and hold the POWER OFF

button for a minimum of two seconds.

12 LED

Flashes when any button is pressed.

13 Computer/Projector Select

Use this button to switch between “Computer” and “Projector”.

When “Computer” is selected, the remote control works as your

computer mouse. In this mode only Mouse pad, Laser, R-Click

and L-Click buttons are available.

NOTE: When either the Menu, Help or Pointer button is pressed,

the Computer/Projector Select button lights in red to indicate that

your projector is in the Projector mode. If no buttons are pressed

within 10 seconds, the light goes out and the Projector mode is

canceled.

14 Laser Button

Press and hold this button to activate the laser pointer. When lit,

you can use the laser to draw your audience’s attention to a red dot

that you can place on any object within 30 feet (10 m).

15 Left Click Button

Use this button to enter your menu selection. It works the same as

the “Enter” button on the cabinet or the card remote control.

16 Laser Pointer

Beams a laser light when “Laser” button is pressed.

17 Infrared Transmitter

Direct the remote control toward the remote sensor on the projec-

tor cabinet.

18 Mouse Pad(▲▼

ᮤ ᮣ)

Works as a mouse for your projected computer image. This pad is

also used to adjust position.

This pad selects the submenu you want to adjust.

After you make your on-screen menu selection, use this pad to

adjust the level up or down.

Remote Control Precautions

• Handle the remote control carefully.

• If the remote control gets wet, wipe it dry immediately.

• Avoid excessive heat and humidity.

• If you will not be using the remote control for a long time, re-

move the batteries.

• Do not place the batteries upside down.

NOTE: Before you use the card remote control for the first time, be

sure to remove the insulation tape from the card remote control.

* Keep the coin cell battery out of reach of children so as not to

allow them to swallow the cell battery.

Also observe the following when using the optional

full function remote:

• Do not look into the laser pointer while it is on.

• Do not point the laser beam at a person.

NOTE:

The optional full function remote control package (LT40RT) includes:

1) Full function remote control

2) Mouse adapter for Macintosh

3) Mouse adapter for IBM PS/2

4) Serial cable

5) Two batteries (AA)

6) Remote control case

The LT40RT optional remote control mouse kit can be obtained

from your dealer at additional cost.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec LT140 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nec LT140

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info