Bedienungsanleitung Nec LT150 (Seite 12 von 59) (Englisch)

493574

Zoom out

Zoom in

Vorherige Seite

1/59

Nächste Seite

E–12

Remote Control Features

1. Infrared Transmitter

Direct the remote control toward the remote sensor on the projec-

tor cabinet.

2. Auto Adjust Button (RGB only)

Press this to automatically adjust the vertical/horizontal position,

clock frequency/phase and resolution if the projected picture is not

centered, if there are vertical stripes on the picture or if the picture

is flickering.

3. Select (▲▼

ᮤ ᮣ) / Volume (+) (–) Buttons

▲▼: Use these buttons to select the menu of the item you wish

to adjust.

When no menus appear, these buttons work as a volume

control.

ᮤ ᮣ: Use these buttons to change the level of a selected menu

item.

A press of the ᮣ button executes the selection.

When the menus or the Viewer tool bar is not displayed,

these buttons can be used to select a slide, or to move the

cursor in Folder List or Slide List.

When the pointer is displayed, these ▲▼ᮤ ᮣ buttons move

the pointer.

4. Cancel Button

Press this button to exit "Menus". Press this button to return to the

previous menu without storing the current settings or adjustments

when you are in the submenu or adjustment screen.

5. Picture Mute Button

This button turns off an image and sound for a short period of time.

Press again to restore the image and sound.

NOTE: When the menu is displayed, a press of this button mutes an image

and sound without turning off the menu.

6. Power Button

If the power is applied and the projector is in standby mode, you

can use this button to turn your projector on and off.

NOTE: To turn off the projector, press and hold the POWER button for a

minimum of two seconds.

7. Help Button

Provides information about operation and adjustment procedures

or the set information for the current menu or adjustment during

menu operation.

8. Pointer Button

Press this button to display one of the eight pointers; press again to

hide the pointer. You can move your pointer icon to the area you

want on the screen using the Select button.

9. Magnify Button (+) (–)

Use the (+) or (–) button to adjust the image size up to 400%.

When the pointer is displayed, the image is magnified about the

pointer as its center. When the pointer is not displayed, the image

is magnified about the screen center as its center.

When the image is magnified, the pointer is changed to the magni-

fying icon.

10. Enter Button

Press this button to execute the selected item. When this is pressed,

the adjustments and settings are saved, and the display is returned

to the menu.

11. Menu Button

Displays the menu for various settings and adjustments.

12. Source Button

Press this button to select a video source such as a PC, VCR, DVD

player or PC Card Viewer (CompactFlash card).

Each time this button is pressed, the input source will change as

follows:

→ RGB → Video → S-Video → PC Card Viewer 

If no input signal is present, the input will be skipped.

Supplied Remote Control

SELECT

Vol.

POINTER

POWER

HELP

RD-366E

PIC.

MUTE

MAGNIFY

SOURCE

AUTO

ADJ.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec LT150 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nec LT150

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info