Bedienungsanleitung Nec LT150 (Seite 41 von 59) (Englisch)

493574

Zoom out

Zoom in

Vorherige Seite

1/59

Nächste Seite

E–41

Mouse Settings:

This option lets you to change your USB mouse settings. The mouse

settings feature is available for USB mouse only. Choose the settings

you want:

Mouse Button ........... "Right Hand" or "Left Hand"

Mouse Sensitivity ..... "Fast", "Medium" or "Slow"

[Page2]

PC Card Viewer Options

Show Folder List:

If this option is checked, when PC Card Viewer input is selected on

the projector, the folder lists will be displayed and allows you to se-

lect the presentation from a CompactFlash card.

Auto Play:

If this option is checked, any given slide will start to play automati-

cally.

Auto Play Interval:

You can specify interval time between 5 and 300 seconds.

NOTE: The Auto Play Interval time set on the PC Card Viewer Utility overrides

the one set here.

Manual Play:

Views a slide manually when PC Card Viewer input is selected.

NOTE: The Auto Play and Manual Play options determine the behavior of the

Play/Stop [ / ] icon on the Viewer toolbar.

NOTE: If you check "Auto Play" and select "PC Card Viewer" on the projector,

the slides will automatically start to play back from any given slide.

Capture Options: (available for JPEG only)

These options are used for the Capture function that you can select

from Tools. You have three options for JPEG compression quality:

High quality, Normal and High Compression.

High Quality .....................Gives quality of JPEG a priority.

Normal .............................Gives normal JPEG quality.

High Compression ...........Gives compression a priority.

[Page3]

Signal Select

RGB:

Allows you to choose "RGB" for an RGB source such as a computer,

or "Component" for a component video source such as a

DVD player. Normally select "Auto" and the projector automatically

detects a component signal. However there may be some component

signals that the projector is unable to detect. If this is the case, select

"Component".

VIDEO and S-VIDEO:

This feature enables you to select composite video standards manu-

ally. Normally select "Auto".

Select the video standard from the pull-down menu.

This must be done for Video and S-Video separately.

[Page4]

Auto Adjust (RGB Only):

When "Auto Adjust" is set to "On", the projector automatically de-

termines the best resolution for the current RGB input signal to project

an image using NEC's Advanced AccuBlend Intelligent Pixel Blend-

ing Technology.

The image can be automatically adjusted for position and stability;

"Horizontal Position", "Vertical Position", "Clock", "Phase", and

"Resolution."

On .............. Automatically adjusts image "Horizontal Position", "Vertical Po-

sition", "Clock", "Phase" and "Resolution".

Off .............. User can adjust the image display functions ("Horizontal Posi-

tion", "Vertical Position", "Clock", "Phase" and "Resolution") manu-

ally.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec LT150 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nec LT150

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info