Bedienungsanleitung Nec LT150Z (Seite 29 von 56) (Englisch)

653977

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

E–29

Using the Menus

NOTE: The on-screen menu may not be displayed correctly while interlaced

motion video image is projected.

1. Press the "Menu" button on the remote control or projector cabi-

net to display the Advanced Menu or Basic/Custom Menu.

NOTE: When using a USB mouse, click the mouse button to display the

menu. For other operations, do the same way as you use your PC mouse.

2. Press the ▲▼ buttons on the remote control or the projector cabi-

net to highlight the menu for the item you want to adjust or set.

3. Press the  button or the "Enter" button on the remote control or

the projector cabinet to select a submenu or item.

4. Adjust the level or turn the selected item on or off by using "Se-

lect"  or  buttons on the remote control or the projector cabi-

net. The on-screen slide bar will show you the amount of in-

crease or decrease.

5. Changes are stored until you adjust it again.

ENTER ......... Stores the setting or adjustments.

CANCEL ...... Return to the previous screen without storing set-

tings or adjustments.

NOTE: You can close the main and sub menus simultaneously by press-

ing the PJ button on the remote control to cancel the Projector mode.

6. Repeat steps 2-5 to adjust an additional item, or press "Cancel"

on the projector cabinet or the remote control to quit the menu

display.

Customizing Basic/Custom Menu

The Basic/Custom menu can be customized to meet your require-

ments. Selecting a menu item from the “Basic/Custom Menu Edit”

list, allows you to custom tailor the menu items to your needs.

1. Select “Basic/Custom Menu Edit” to display the “Basic/Custom

Menu Edit” screen.

2. Use the Select buttons ▲ or ▼ to highlight your selection and

press the Enter button to place a check mark next to an option.

This action enables that feature.

Press the Enter button again to clear the check box.

If you select an item with a solid triangle  and press the Enter

button on the remote control or the projector cabinet, you can

enable all the items within that submenu.

Also you can turn on an item within the submenu without plac-

ing a check mark on the main menu item.

NOTE: Up to 12 main menu items (within Basic/Custom Menu Edit, not

including submenu items) can be selected.

3. In order for the changes to take effect, use the  or  button on

the remote control or the projector cabinet to highlight “OK”,

then press the Enter button. To cancel the changes, use the Select

▲ or ▼ buttons to highlight “Cancel” and press the “Enter” but-

ton. To return to the factory default, select “Reset” then press the

“Enter” button.

The default Basic/Custom Menu items are:

Source Select (RGB, Video, S-Video and PC Card Viewer), Picture, Volume,

Image Options (Keystone), Projector Options (Menu and Setup), Tools (Cap-

ture, PC Card Files and ChalkBoard) and Help (Contents and Information)

NOTE: Once you have selected OK on the Basic/Custom Menu Edit screen,

you cannot cancel the changes on the Menu screen. However, you can re-edit

the menu items over again as described in the steps above.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec LT150Z Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nec LT150Z

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info