Bedienungsanleitung Nec LT150Z (Seite 35 von 56) (Englisch)

653977

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

E–35

Resolution (when Auto Adjust is off)

This allows you to activate or deactivate the Advanced AccuBlend

feature.

Auto ............... Turns on the Advanced AccuBlend feature. The projector auto-

matically reduces or enlarges the current image to fit the full

screen.

Native ............ Turns off the Advanced AccuBlend feature. The projector dis-

plays the current image in its true resolution.

See “Auto Adjust (RGB Only)” on page E-38 for turning on or

off the Auto Adjust feature.

NOTE: While you are displaying an image with higher resolution than the

projector's native resolution, even when you are in the Native mode, the im-

age is displayed full screen using the Advanced AccuBlend feature.

Factory Default

Changes all adjustments and setting to the factory preset.

All Data .......... Reset all the adjustments and settings for all the signals to the

factory preset.

The items can be reset except Language, Communication Speed,

Remaining Lamp Time, Lamp Hour Meter and Projector Usage.

(To reset the lamp usage time, see “Clear Lamp Hour Meter” on

page E-39.)

Current Signal .....

Resets the adjustments for the current signal to the factory pre-

set levels.

The items that can be reset for the currently projected image

are:

Picture (Brightness, Contrast, Color, Hue and Sharpness), Im-

age Options (Aspect Ratio, Noise Reduction, Position/Clock,

Resolution and Video Filter) and Color Management (Gamma

Correction, Color Matrix and White Balance).

NOTE: The Volume, Keystone and all the items in the Projector Options can

be reset only when "All Data" is selected.

Noise Reduction (not available for RGB and PC Card Viewer)

You can select three levels video noise reduction.

NOTE: The lower the Noise Reduction level, the better the image quality by

way of higher video bandwidth.

Position/ Clock (when Auto Adjust is off)

This allows you to manually adjust the image horizontally and verti-

cally, and adjust Clock and Phase.

Horizontal/Vertical Position:

Adjusts the image location horizontally and vertically using the



and



buttons.

This adjustment is made automatically when the Auto Adjust is

turned on. See “Auto Adjust (RGB Only)” on page E-38 for turn-

ing on or off the Auto Adjust feature.

Clock ............. Use this item to fine tune the computer image or to remove any

vertical banding that might appear. This function adjusts the

clock frequencies that eliminate the horizontal banding in the

image.

Press the  and  buttons until the banding disappears.

This adjustment may be necessary when you connect your com-

puter for the first time. This adjustment is made automatically

when the Auto Adjust is turned on.

Phase ............ Use this item to adjust the clock phase or to reduce video noise,

dot interference or cross talk. (This is evident when part of your

image appears to be shimmering.) Use the  and  buttons to

adjust the image.

Use "Phase" only after the "Clock" is complete.

This adjustment is made automatically when the Auto Adjust is

turned on.

Video Filter (when Auto Adjust is off)

This function reduces video noise.

On ................. The low-pass filter is applied.

Off ................. The filter is removed.

Screen adjustments are possible even when the filter is On.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec LT150Z Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nec LT150Z

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info