Bedienungsanleitung Nec LT155 (Seite 12 von 57) (Englisch)

493577

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

E – 11

Remote Control Features

NOTE: If you are using a Macintosh computer, you can click either the right-

click or left-click button to activate the mouse.

NOTE: If any one of the buttons is pressed and held for 60 seconds or more,

the button operations will cease to operate. This is not a malfunction, rather it

is a feature used to prolong battery power. To cancel this feature, press any one

of the buttons other than the Mouse button.

1. Infrared Transmitter

Direct the remote control toward the remote sensor on the projector

cabinet.

2. Laser Pointer

Beams a laser light when "Laser" button is pressed.

3. LED

Flashes when any button is pressed.

4. Power On Button

If the main power is applied, you can use this button to turn your pro-

jector on.

5. Power Off Button

If the main power is applied, you can use this button to turn your pro-

jector off.

NOTE: To turn off the projector, press and hold the POWER OFF button for a

minimum of two seconds.

6. Video Button

Press this button to select an NTSC, PAL, SECAM or NTSC4.43 com-

patible video source from a VCR, DVD player, laser disc player or docu-

ment camera.

7. S-Video Button

Press this button to select an S-Video source from a VCR.

8. RGB 1 Button

Press this button to select a video source from computer or compo-

nent equipment connected to your RGB port (DVI digital on LT156).

9. RGB 2 Button

Not available on LT155/LT154.

For LT156:

Press this button to select DVI analog signal from a computer.

10. Auto Adjust Button (RGB only)

Press this button to automatically adjust the vertical/horizontal posi-

tion, clock frequency/phase and resolution if the projected picture is

not centered, if there are vertical stripes on the picture or if the picture

is flickering.

11. PJ Button

Press this button to switch the Mouse, Cancel/Right Click, and Enter/

Left Click buttons between the Projector mode (lit red) and the Com-

puter mode. Press this button or any one of the Menu, Help, Pointer,

PC Card, Folder List or Slide List buttons to switch to the Projector

mode and the PJ button lights red. To switch back to the Computer

mode, press the PJ button again.

12. Laser Button

Press and hold this button to activate the laser pointer. When lit, you

can use the laser to draw your audience's attention to a red dot that

you can place on any object.

13. Menu Button

Displays the menu for various settings and adjustments.

14. Mouse (▲▼

ᮤ ᮣ

) / (+) (–) Button

When you are in the Computer mode, these buttons work as a com-

puter mouse.

When you are in the Projector mode, which is indicated by lighting the

PJ button:

▲▼: Use these buttons to select the menu of the item you wish to

adjust.

ᮤ ᮣ

: Use these buttons to change the level of a selected menu item.

A press of the

ᮣ

button executes the selection.

When the pointer is displayed, these ▲▼

ᮤ ᮣ

buttons move the

pointer.

KEYSTONE

FREEZE

PIC

MUTE

HELP

POINTER

PC CARD

VIDEO S

VIDEO

AUTO ADJ.

RGB 1

MENU LASER

R-CLICK /CANCEL

RGB 2 P

ONOFF

MAGNIFY

VOL.

SLIDE

FOLDER

SLIDE

LIST

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec LT155 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nec LT155

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info