Bedienungsanleitung Nec LT155 (Seite 36 von 57) (Englisch)

493577

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

E – 35

Noise Reduction

You can select three levels video noise reduction.

NOTE: The lower the Noise Reduction level, the better the image quality by way

of higher video bandwidth.

Color Matrix

First select an appropriate color matrix to fit your component signal for

HDTV or SDTV. Then select an appropriate matrix type from B-Y/R-Y,

Cb/Cr or Pb/Pr.

White Balance

This allows you to adjust the white balance. Brightness for each color

(RGB)is used to adjust the black level of the screen;

Contrast for each color (RGB)to adjust the white level of the screen.

First use the ▲ or ▼ buttons to select R, G, or B for the brightness and

the contrast. Next use the

ᮤ

ᮣ

buttons to adjust the level.

Position/ Clock (when Auto Adjust is off)

This allows you to manually adjust the image horizontally and verti-

cally, and adjust Clock and Phase.

This allows you to activate or deactivate the Advanced AccuBlend fea-

ture.

Auto ............. Turns on the Advanced AccuBlend feature. The projector au-

tomatically reduces or enlarges the current image to fit the

full screen.

Native ........... Turns off the Advanced AccuBlend feature. The projector dis-

plays the current image in its true resolution.

See "Auto Adjust (RGB Only) on page E-38 for turning on or off the

Auto Adjust feature.

NOTE: While you are displaying an image with higher resolution than the

projector's native resolution, even when you are in the Native mode, the image

is displayed full screen using the Advanced AccuBlend feature.

Video Filter (when Auto Adjust is off)

Horizontal/Vertical Position

.................... Adjusts the image location horizontally and vertically using

the

ᮤ

and

ᮣ

buttons.

This adjustment is made automatically when the Auto Adjust

is turned on.

Clock ............ Use this item to fine tune the computer image or to remove

any vertical banding that might appear. This function adjusts

the clock frequencies that eliminate the horizontal banding in

the image.

Press the

ᮤ

and

ᮣ

buttons until the banding disappears.

This adjustment may be necessary when you connect your

computer for the first time. This adjustment is made auto-

matically when the Auto Adjust is turned on.

Phase ........... Use this item to adjust the clock phase or to reduce video

noise, dot interference or cross talk. (This is evident when

part of your image appears to be shimmering.) Use the

ᮤ

and

ᮣ

buttons to adjust the image.

See "Auto Adjust (RGB Only) on page E-38 for turning on or off the

Auto Adjust feature.

Use "Phase" only after the "Clock" is complete.

This adjustment is made automatically when the Auto Adjust is turned

on.

Resolution (when Auto Adjust is off)

This function reduces video noise.

On ................ The low-pass filter is applied.

Off ................ The filter is removed.

Screen adjustments are possible even when the filter is On.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec LT155 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nec LT155

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info