Bedienungsanleitung Nec LT157 (Seite 38 von 58) (Englisch)

493580

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

E – 36

Allows you to set preferences for the on-screen menu.

Press “OK” to save your changes for all the features of Page1 and

Page2.

[Page1]

Projector Options

Menu Display Time :

This option allows you to select how long the projector waits after

the last touch of a button to turn off the menu.

The preset choices are "Manual", "Auto 5 sec", "Auto 15 sec", and

"Auto 45 sec". The "Auto 45 sec" is the factory preset.

Manual ......... The menu can be turned off manually.

Auto 5 sec .... The menu will automatically be turned off in 5 seconds if no

buttons are pressed within 5 seconds.

Auto 15 sec .. The menu will automatically be turned off in 15 seconds if no

buttons are pressed within 15 seconds.

Auto 45 sec .. The menu will automatically be turned off in 45 seconds if no

buttons are pressed within 45 seconds.

NOTE: If no buttons on the remote control are pressed within 10 seconds, the PJ button’s

light goes out to indicate that you are in the Computer mode. To enable the projector

menu operation again, press the PJ button again to light red.

Menu Mode:

This feature allows you to select two menu modes: Advanced Menu

and Basic/Custom Menu.

Advanced Menu ..........This is the menu that contains all the available menus

and commands.

Basic/Custom Menu....This is the menu that you can customize using the

Basic/Custom Menu Edit to fit your needs.

The factory default Basic/Custom menu includes:

Source Select (RGB [DVI (DIGITAL) / DVI (ANALOG) on LT158], Video, S-

Video and PC Card Viewer), Picture, Volume, Image Options (Keystone),

Projector Options (Menu and Setup), Tools (Capture, PC Card Files and

ChalkBoad) and Help (Contents and Information). See page E-29 for in-

structions about how to customize the Basic/Custom Menu.

Language:

You can choose one of seven languages for on-screen instructions.

The options are: English, German, French, Italian, Spanish, Swed-

ish and Japanese.

Projector Pointer:

This enables you to select from eight different Pointer icons for the

"Pointer" button on your remote control.

After moving your Pointer icon to the area you want on the screen,

press the Magnify button on the remote control to enlarge the se-

lected area on the screen. See page E-28 for more details.

NOTE: There may be cases where the Pointer function is not available (ex. a

non-interlace signal at 15kHz such as video game.)

Message:

You can choose the desired information to be displayed on the screen.

On ................ The message will be displayed.

Off................ The message will not be displayed.

Source Display: You can turn on and off the information for input

name such as VIDEO and RGB.

When this option is on, the current input will be displayed each time

you switch sources or turn on the projector.

No Input: This option turns on or off the "No Input" message to be

displayed in the top right corner on the screen.

Clean Filter: This option turns on or off the "Please clean the fil-

ters" message each time you turn on the projector if the projector

has been used in excess of 100 hours of use.

To reset the filter usage, see page E-38.

Direct Button:

Volume Bar: This option turns on or off the volume bar when you adjust

the sound volume using VOLUME +/– button on the remote control.

On ................ You can increase or decrease the sound volume with the vol-

ume bar on screen.

Off ................ You can increase or decrease the sound volume without hav-

ing to use the volume bar.

Keystone Bar: This option turns on or off the keystone bar when you ad-

just the keystone using KEYSTONE +/– button on the remote control.

On ................ You can increase or decrease the level with the keystone bar

on screen.

Off................ You can increase or decrease the level without having to use

the keystone bar.

[Page2]

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec LT157 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nec LT157

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info