Bedienungsanleitung Nec LT158 (Seite 32 von 58) (Englisch)

493581

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

E – 30

2. Use the ▲ or ▼ button to highlight your selection and press the

Enter button to place a check mark next to an option. This action

enables that feature.

Press the Enter button again to clear the check box.

If you select an item with a solid triangle

ᮣ

and press the Enter

button on the remote control or the projector cabinet, you can

enable all the items within that submenu.

Also you can turn on an item within the submenu without placing

a check mark on the main menu item.

NOTE: Up to 12 main menu items (within Basic/Custom Menu Edit, not

including submenu items) can be selected.

3. In order for the changes to take effect, use the

ᮤ

ᮣ

button on

the remote control or the projector cabinet to highlight “OK”,

then press the Enter button. To cancel the changes, use the ▲ or

▼ buttons to highlight “Cancel” and press the “Enter” button.

To return to the factory default, select “Reset” then press the “En-

ter” button.

The default Basic/Custom Menu items are:

Source Select (RGB [DVI (DIGITAL) / DVI (ANALOG) on LT158],

Video, S-Video and PC Card Viewer), Picture, Volume, Image Op-

tions (Keystone), Projector Options (Menu and Setup), Tools (Cap-

ture, PC Card Files and ChalkBoard) and Help (Contents and Infor-

mation)

NOTE: Once you have selected OK on the Basic/Custom Menu Edit screen, you

cannot cancel the changes on the Menu screen. However, you can re-edit the

menu items over again as described in the steps above.

NOTE: If the “Advanced Menu” item has been selected on the Menu mode, you

get the “Confirmation Change Menu” upon completion of “Basic/Custom Menu”

editing. In this case, selecting “Yes” then “Enter” will close all the menus and

apply the changes from the Advanced menu to the Basic/Custom Menu. If you

select “No” then “Enter” functions, then all menu items will return to the Ad-

vanced menu, but your changes will still be available within the “Basic/Custom

Menu” selection. To display the previously tailored Basic/Custom Menu, select

“Basic/Custom Menu” from the “Menu Mode”.

An item “To Advanced Menu” will be added to the bottom of the Basic/

Custom Menu.

Selecting this item and pressing the “Enter” button will display the “Ad-

vanced Menu” features.

Using a USB Mouse

Using a USB mouse gives you a smooth operation. A commercially

available USB mouse is required.

NOTE: There may be some brands of USB mouse that the projector does not

support.

Operate the Menus using the USB mouse:

Mouse Cursor:

When connecting a USB mouse to the projector, you get a mouse

cursor on the screen.

Unless you use your USB mouse within 10 seconds, the mouse

cursor disappears.

Menu Display:

Clicking with a mouse button displays the main menu.

Clicking

displays the pull-down menu.

To close the menu, click anywhere in the background.

Adjusting and Setting Display:

You can select a menu item and click with a mouse button to make

adjustments and setting.

Examples:

Click (or press and hold) the mouse button

ᮤ

ᮣ

to adjust the

brightness.

Or click and drag the mouse button on the slide bar horizontally to

adjust it.

To save the adjustments, click

. The display is closed.

If you click anywhere in the background while displaying adjust-

ment and setting menu or dialog box, you will get the main menu at

the clicking point.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec LT158 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nec LT158

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info