Bedienungsanleitung Nec mt 860 (Seite 48 von 65) (Englisch)

214296

Zoom out

Zoom in

Vorherige Seite

1/65

Nächste Seite

E-48

Setting LAN Mode

This feature allows you to set various setting items when the projector is

used on your network.

Consult with your network administrator about these settings.

NOTE:

• A LAN card is required for LAN connection; NEC's optional wireless LAN card

is available. For more information on inserting or ejecting a LAN card, see

page E-28.

• Either PC Card Slots 1 or 2 can accept LAN card. If two LAN cards are in-

serted into both PC card slots, the first inserted one is effective.

CAUTION: Make sure that the LAN card is removed during Standby

mode (NOT Idle mode) or with the main power off.

Failure to do so may cause damage to the data on your PC card.

IP Address

An IP address can be automatically assigned to this projector by your

DHCP server. If your network does not automatically assign IP address,

ask your network administrator for an address, and then register it manu-

ally.

Automatic ....... Automatically assigns an IP address to the projector

from a DHCP server.

Manual ........... Provides a space for you to register the IP address or

subnet mask number obtained from your network ad-

ministrator.

IP Address ..... Set your IP address. Press

to display the software

keyboard and type in 12 numeric characters.

Subnet Mask .. Set your subnet mask number. Press

to display

the software keyboard and type in 12 numeric char-

acters.

Projector Name

....................... Specify a unique projector name. Press

to display

the software keyboard and type in. Up to 16 alphanu-

meric characters can be used.

Gateway ......... Set the default gateway of the network connected to

the projector. Press

to display the software key-

board and type in 12 numeric characters.

Checking this box will make the set default route valid.

When data is sent from the LAN card, the transfer

location will be searched according to the previously

set routing information; however, when the transfer

location has not been found as a result of the search,

the data will be sent to the device that holds the IP

address set here. The IP address that is set here must

be one that can be identified by a search of the rout-

ing information.

DNS Configuration

....................... Type in the IP address of DNS server on the network

connected to the projector. 12 numeric characters are

used.

Domain Name Type in domain name of the network connected to

the projector. Up to 60 alphanumeric characters can

be used.

Network Type (required for wireless only)

Mode:

Select communication method when using wireless LAN.

Infrastructure ................ Select this option when communicating with

one or more equipment connected to the

wireless or wired LAN network via an ac-

cess point.

802.11 Ad Hoc .............. Select this option when using the wireless

LAN to communicate with a computer in a

one-to-one correspondence. This is a

method that meets the IEEE802.11 wireless

standard.

Ad Hoc .......................... Select this option when using the wireless

LAN to communicate with a computer in a

one-to-one correspondence.

Easy Connection .......... This allows you to easily set up wireless LAN

connection. See the supplied Software Util-

ity Installation Guide for more information.

SSID (Network name):

Enter an identifier (SSID) for wireless LAN. Communication can be

done only with equipment whose SSID matches SSID for your wire-

less LAN. Up to 16 alphanumeric characters can be used (Case-

sensitive).

NOTE: To disable SSID, select a space (null) or "ANY"(All caps).

Channel:

Set this option when selecting [802.11 Ad Hoc] or [Ad Hoc] in [Mode].

Select a channel number from the pull-down list. The channel must

match for all wireless devices communicating on your wireless LAN.

NOTE: Channels in the pull-down list are different depending on which coun-

try you live in.

TX rate:

Select a wireless transmission speed. Normally leave it as Automatic.

Try another transmission speed when the connection fails.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec mt 860 Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nec mt 860

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info