Bedienungsanleitung Nec MT1045 (Seite 23 von 42) (Englisch)

493584

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

E–23

Setup

Orientation

Page1 Page2 Page3

Front Floor

Background

Blue

Signal Select

S-Video

Auto

Video

Auto

RGB1

Auto

RGB2

Auto

OK Cancel

Page4

Setup

Enables you to set operating options.

Press “OK” to save your changes for all the features of Page1, Page2,

Page3 and Page4.

[Page1]

Page4

Setup

Page1

Mouse

Button

Right Hand Left Hand

Auto Start

Page2 Page3

Power Management

Power Off Confirmation

Keystone Save

Clear Lamp Hour Meter

Fan High Speed Mode

OK Cancel

Sensitivity

Fast Medium

Slow

Orientation:

This reorients your image for your type of projection.

The options are:front floor projection, rear ceiling projection, rear

floor projection, and front ceiling projection.

Background:

Use this feature to display a black, blue screen or logo when no

signal is available.

Transferring a logo from your PC

You can transfer your background logo from your PC to the projector.

To proceed as follows:

1) Install the PC Control Utility 1.0 on your PC from the supplied CD-

ROM. See page E-27 for installation.

2) Connect the PC CONTROL port of the projector with the serial

port of your PC with the supplied serial cable and then turn on the

projector.

3) Start the PC Control Utility on your PC.

4) Click "Logo Transfer" button.

For more detailed information, see Readme.txt file included on the

supplied CD-ROM.

NOTE: File size must be 64KB or less. JPEG and BMP images are

available only.

Signal Select:

<RGB1, 2>

Allows you to choose "RGB 1 or 2" for an RGB 1 or 2 source

such as a computer, or "Component" for a component video source

such as a DVD player. Normally select "Auto" and the projector

automatically detects a component signal. However there may be

some component signals that the projector is unable to detect. If

this is the case, select "Component".

This feature enables you to select composite video standards

manually. Normally select "Auto".

When you select the video standard for Video and S-Video sepa-

rately, first select the radio button and then select the video stan-

dard from the pull-down menu.

This must be done for Video and S-Video respectively.

[Page2]

Auto Start:

Turns the projector on automatically when the power cable is

inserted into an active power outlet. This eliminates the need to

always use the “Power” button on the remote control or projector

cabinet.

Power Management:

When this option is on and there is no RGB input for five min-

utes or more, the projector will automatically turn itself off.

Power Off Confirmation:

This option determines whether a confirmation dialog for turn-

ing off the projector will appear or not.

NOTE: When the confirmation message is displayed, you must be in the Pro-

jector mode to operate your projector using the remote control. If not, press

the Computer/Projector Select button to change your projector to the Projec-

tor mode. The button lights to indicate that you are in the Projector mode.

Mouse Settings:

This option lets you to change your USB mouse settings. The

mouse settings feature is available for USB mouse only. Choose

the settings you want:

Mouse Button: “Right Hand” or “Left Hand”

Mouse Sensitivity: “Fast”, “Medium” or “Slow”

Keystone Save:

This option enables you to save your current keystone settings.

Saving your change once affects all sources. The changes are

saved when you turn off the projector.

Fan High Speed Mode:

This option allows you to select two modes for fan speed: high-

speed mode and normal speed mode.

When you wish to cool down the temperature inside the projec-

tor quickly, check this box. This is convenient especially when

the projector is installed on the ceiling.

Clear Lamp Hour Meter:

Resets the lamp clock back to zero. Pressing this button appears

the “Clear Lamp Usage ?” confirmation dialog box. To reset the

lamp usage hour, press “OK”.

NOTE: The projector will turn off and go into standby mode after 2100

hours (1600 hours for MT1045) of service. If this happens, press the

“Help” button on the remote control for ten seconds to reset the lamp

clock back to zero. Do this only after replacing the lamp.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec MT1045 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nec MT1045

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info