Bedienungsanleitung Nec MT1056 (Seite 37 von 55) (Englisch)

654050

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

E – 37

Remote Sensor:

This option determines which remote sensors on the projector are

enabled in wireless mode.

The options are: front, rear, right, or left. All checked boxes indicate that

they can accept the infrared signal from the supplied remote control.

RGB1/2:

Allows you to choose “RGB” for an RGB source such as a com-

puter, or “Component” for a component video source such as a

DVD player. Normally select “Auto” and the projector automatically

detects a component signal. However there may be some compo-

nent signals that the projector is unable to detect. If this is the case,

select “Component”.

SXGA+:

To project an SXGA+ signal (14001050@60Hz) to fill the screen,

select the check box. This can be done to both RGB 1 and 2 sepa-

rately.

NOTE: If an SXGA+ signal is projected with the check box unselected, sev-

eral lines of information on the edges will be lost. This is because both

SXGA@60Hz and SXGA+ have the same frequency and the projector iden-

tifies the SXGA+ signal as SXGA.

VIDEO and S-VIDEO:

This feature enables you to select composite video standards manu-

ally. Normally select “Auto”.

Select the video standard from the pull-down menu.

This must be done for Video and S-Video separately.

[Page4]

[Page3] Signal Select

Auto Adjust (RGB Only):

When “Auto Adjust” is set to “On”, the projector automatically determines

the best resolution for the current RGB input signal to project an image

using NEC’s Advanced AccuBlend Intelligent Pixel Blending Technology.

The image can be automatically adjusted for position and stability;

“Horizontal Position”, “Vertical Position”, “Clock” and “Phase”.

On .... Automatically adjusts image “Horizontal Position”, “Vertical Posi-

tion”, “Clock” and “Phase”.

Off .... User can adjust the image display functions (“Horizontal Position”,

“Vertical Position”, “Clock” and “Phase”) manually.

Auto Start:

Turns the projector on automatically when the power cable is inserted

into an active power outlet. This eliminates the need to always use

the “Power” button on the remote control or projector cabinet.

Power Management:

When this option is on and there is no RGB input for five minutes or

more, the projector will automatically turn itself off.

Power Off Confirmation:

This option determines whether a confirmation dialog for turning off

the projector will appear or not.

NOTE:

When the confirmation message is displayed, you must be in the Pro-

jector mode to operate your projector using the remote control. If not, press

the PJ button on the remote control to change your projector to the Projector

mode. The button lights to indicate that you are in the Projector mode.

Keystone Save:

This option enables you to save your current keystone settings.

Saving your change once affects all sources. The changes are saved

when you turn off the projector.

Fan High Speed Mode:

This option allows you to select two modes for fan speed: high-

speed mode and normal speed mode.

When you wish to cool down the temperature inside the projector

quickly, check this box. This is convenient especially when the pro-

jector is installed on the ceiling.

Auto Mute for Built-in Speaker:

This option allows you to mute the built-in speakers automatically

when you connect an audio cable to the AUDIO OUT terminal.

Clear Lamp Hour Meter:

Resets the lamp clock back to zero. Pressing this button appears a

confirmation dialog box. To reset the lamp usage hour, press “OK”.

NOTE: The projector will turn off and go into standby mode after 1600 hours

(up to 2600 hours in Eco mode) of service. If this happens, press the “Help”

button on the remote control for ten seconds to reset the lamp clock back

to zero. Do this only after replacing the lamp.

Clear Filter Usage:

Resets the filter usage back to zero. Pressing this button appears a

confirmation dialog box. To reset the filter usage hour, press “OK”.

[Page5]

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec MT1056 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nec MT1056

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info