Bedienungsanleitung Nec MT1075 (Seite 7 von 69) (Englisch)

493585

Zoom out

Zoom in

Vorherige Seite

1/69

Nächste Seite

E-7

11 10 9 8

1412 13

5 6

Top Features

1. POWER Button (ON / STAND BY)( )

Use this button to turn the power on and off when the main power is

supplied and the projector is in standby mode.

NOTE: To turn on or off the projector, press and hold this button for a mini-

mum of two seconds.

2. POWER Indicator

When this indicator is green, the projector is on; when this indicator

is orange, it is in standby or idle mode. See the Power Indicator sec-

tion on page E-57 for more details.

3. STATUS Indicator

If this light blinks red rapidly, it indicates that an error has occurred,

the lamp cover is not attached properly or the projector has over-

heated. If this light remains orange, it indicates that you have pressed

a cabinet key while the Control Panel Key Lock is enabled. See the

Status Indicator section on page E-57 for more details.

4. LAMP Indicator

If this light blinks red rapidly, it's warning you that the lamp has reached

the end of its usable life. After this light appears, replace the lamp as

soon as possible (See page E-55). If this is lit green continually, it

indicates that the lamp mode is set to Eco. See the Lamp Indicator

section on page E-57 for more details.

5. SOURCE Button

Use this button to select a video source such as a PC, VCR, DVD

player, Viewer (PC card), or LAN.

Press and release this button quickly to display the Source List.

Each time this button is pressed for a minimum of ONE second, the

input source will change as follows:

RGB1 → RGB2 → Video → S-Video → DVI (DIGITAL) → Viewer → RGB1 → ...

If no input signal is present, the input will be skipped.

6. AUTO ADJUST Button

Use this button to adjust Position-H/V and Pixel Clock/Phase for an

optimal picture (See page E-22). Also press and hold this button for a

minimum of 2 seconds to enable the Auto Focus or Auto Wall Color

Correction function (See page E-49).

7. 3D REFORM Button

Press this button to enter 3D Reform mode to correct the keystone

(trapezoidal) distortion, and make the image square.

8. ZOOM Button (+/–)

Zoom the lens in and out.

9. FOCUS Button (+/–)

Adjust the lens focus.

10. MENU Button

Displays the menu.

11. SELECT ̆̄̇̈ (+) (–) / Volume Buttons

̆̄ : Use these buttons to select the menu of the item you wish to

adjust. When no menus appear, these buttons work as a vol-

ume control.

̇̈ : Use these buttons to change the level of a selected menu item.

A press of the ̈ button executes the selection. When the menus

or the Viewer tool bar is not displayed, these buttons can be

used to select a slide, or to move the cursor in Folder List or

Slide List.

When the pointer is displayed, these ̆̄̇̈ buttons move the pointer.

12. ENTER Button

Executes your menu selection and activates items selected from the

menu.

13. CANCEL Button

Press this button to exit "Menus". Press this button to return the ad-

justments to the last condition while you are in the adjustment or

setting menu.

14. PC CARD Access Indicator 1/2

Lights while accessing a PC card.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec MT1075 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nec MT1075

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info