Bedienungsanleitung Nec MT850 (Seite 5 von 56) (Englisch)

493586

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

E – 5

1. INTRODUCTION

Introduction to the MultiSync MT1055/MT1050/

MT850 Projector

This section introduces you to your new MultiSync MT1055 and MT1050

(XGA)/ MT850 (SVGA) Projector and describes the features and con-

trols.

Congratulations on Your Purchase of The

MultiSync MT1055/MT1050/MT850 Projector

The MultiSync MT1055/MT1050/MT850 is one of the very best projec-

tors available today. The MultiSync MT1055/MT1050/MT850 enables

you to project precise images up to 300 inches across (measured di-

agonally) from your PC or Macintosh computer (desktop or notebook),

VCR, DVD player, document camera, a laser disc player or PC Card

Viewer.

You can use the projector on a tabletop or cart, you can use the projec-

tor to project images from behind the screen, and the projector can be

permanently mounted on a ceiling*

. The remote control can be used

wirelessly.

Features you’ll enjoy:

• Simple set up and operation.

• Hot air blown from the vents does not bother the audience during

your presentation since the vents are located at the front of the pro-

jector.

• A high-performance 200 watt NSH lamp.

• The supplied wireless remote control that operates the projector from

any angle.

• The image can be projected between 30 and 300 inches (measured

diagonally).

• Keystone correction allows you to correct trapezoidal distortion so

that the image is square.

• You can choose between video modes depending on your source:

"normal" for a typical picture, "natural" for true color reproduction.

• The built-in PC Card Viewer allows you to start your presentation

even when a PC is not available at the site.

• The "Capture" enables you to capture the current projected image.

• An image can be projected from in front or behind a screen, and the

projector can even be installed on the ceiling.

• NEC Technologies’ exclusive Advanced AccuBlend intelligent pixel

blending technology - an extremely accurate image compression

technology - offers a crisp image with UXGA (1600ן1200) resolu-

tion*

• Supports most IBM VGA, SVGA, XGA*

, SXGA/UXGA(with Ad-

vanced AccuBlend)*

, Macintosh, component signal (YCbCr / YPbPr)

or any other RGB signals within a horizontal frequency range of 15

to 100 kHz and a vertical frequency range of 50 to 120 Hz. This

includes NTSC, PAL, PAL60, SECAM and NTSC4.43 standard video

signals.

NOTE: Composite video standards are as follows:

NTSC: U.S. TV standard for video in U.S. and Canada.

PAL: TV standard used in Western Europe.

PAL60: TV standard used for NTSC playback on PAL TVs.

SECAM: TV standard used in France and Eastern Europe.

NTSC4.43: TV standard used in Middle East countries.

• The supplied remote control can be used without a cable, and you

can even use the remote control and mouse adapter to operate your

PC or Macintosh mouse wirelessly from across the room with the

built-in remote mouse receiver.

• You can control the projector with a PC using the PC Control port*

• USB terminal allows USB mouse operation *

• The contemporary cabinet design is light, compact, easy to carry,

and complements any office, boardroom or auditorium.

• Eight pointers are available for your presentation.

Do not attempt to mount the projector on a ceiling yourself. The pro-

jector must be installed by qualified technicians in order to ensure

proper operation and reduce the risk of bodily injury. In addition, the

ceiling must be strong enough to support the projector and the in-

stallation must be in accordance with any local building codes. Please

consult your dealer for more information.

An XGA image (1024ן768) is converted into an 800ן600 crisp

image with NEC technology’s Advanced AccuBlend on MT850.

A UXGA (1600ן1200) and SXGA image (1280ן1024) are displayed

with NEC technology’s Advanced AccuBlend on MT1055/MT1050.

The PC Control Utility 1.0 is required. This program is included on

the supplied CD-ROM.

The USB terminal meets the USB1.1 specification and accepts a

USB mouse only.

Getting Started

The fastest way to get started is to take your time and do everything

right the first time. Take a few minutes now to review the user’s manual.

This may save you time later on. At the beginning of each section of

the manual you’ll find an overview. If the section doesn’t apply, you can

skip it.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec MT850 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nec MT850

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info