Bedienungsanleitung Nec np 1000 (Seite 60 von 144) (Englisch)

214560

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

¸ Operation Using an HTTP Browser

Overview

The use of HTTP server functions will allow control of the projector from a web browser without the installation of

special software. Please be sure to use “Microsoft Internet Explorer 4.x” or a higher version for the web browser. (This

device uses “JavaScript” and “Cookies” and the browser should be set to accept these functions. The setting method

will vary depending on the version of browser. Please refer to the help files and the other information provided in your

software.)

Access is gained to the HTTP server functions by specifying

http:// <the projector’s IP address> /index.html

in the entry column of the URL.

NOTE:

• The display’s or button’s response can be slowed down or operation may not be accepted depending the settings of your network.

Should this happen, consult your network administrator.

The projector may not respond if its buttons are repeatedly pressed in rapid intervals. Should this happen, wait a moment and

repeat. If you still can’t get any response, turn off and back on the projector.

• Do not use the HTTP Server functions and PC Control Utility 3.0 included on the supplied CD-ROM. Using both at the same time

may result in a connection failure or slow response.

Preparation Before Use

Make network connections and set up the projector and confirm that it is complete before engaging in browser opera-

tions. (→ [LAN Mode] on page 89)

Operation with a browser that uses a proxy server may not be possible depending on the type of proxy server and the

setting method. Although the type of proxy server will be a factor, it is possible that items that have actually been set

will not be displayed depending on the effectiveness of the cache, and the contents set from the browser may not be

reflected in operation. It is recommended that a proxy server not be used unless it is unavoidable.

Handling of the Address for Operation via a Browser

Regarding the actual address that is entered for the address or entered to the URL column when operation of the

projector is via a browser, the host name can be used as it is when the host name corresponding to the IP address of

the projector has been registered to the domain name server by a network administrator, or the host name corre-

sponding to the IP address of the projector has been set in the “HOSTS” file of the computer being used.

Example 1: When the host name of the projector has been set to “pj.nec.co.jp”,

http://pj.nec.co.jp/index.html

is specified for the address or the entry column of the URL.

Example 2: When the IP address of the projector is “192.168.73.1”, access is gained to the

HTTP server functions by specifying

http://192.168.73.1/index.html

for the address or the entry column of the URL.

4. Convenient Features

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec np 1000 Seite 60

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nec np 1000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info