493607
74
Zoom out
Zoom in
Vorherige Seite
1/82
Nächste Seite
Projector
U300X/U250X
U310W/U260W
Users Manual
The U250X and U260W are not distributed in North America.
Model No.
NP-U300X/NP-U250X
NP-U310W/NP-U260W
4th edition June 2011
• DLP and BrilliantColor are trademarks of Texas Instruments.
• IBM is a trademark or registered trademark of International Business Machines Corporation.
Macintosh, Mac OS X, iMac, and PowerBook are trademarks of Apple Inc., registered in the U.S. and
other countries.
Microsoft, Windows, Windows Vista, Internet Explorer, .NET Framework, and PowerPoint are
either a registered trademark or trademark of Microsoft Corporation in the United States and/or
other countries.
MicroSaver is a registered trademark of Kensington Computer Products Group, a division of ACCO
Brands.
Virtual Remote Tool uses WinI2C/DDC library, © Nicomsoft Ltd.
HDMI, the HDMI Logo and High-Denition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
Blu-ray is a trademark of Blu-ray Disc Association
Other product and company names mentioned in this user’s manual may be the trademarks or
registered trademarks of their respective holders.
NOTES
(1) The contents of this user’s manual may not be reprinted in part or whole without permission.
(2) The contents of this user’s manual are subject to change without notice.
(3) Great care has been taken in the preparation of this user’s manual; however, should you notice any
questionable points, errors or omissions, please contact us.
(4) Notwithstanding article (3), NEC will not be responsible for any claims on loss of prot or other
matters deemed to result from using the Projector.
i
English ...
Important Information
Safety Cautions
Precautions
Please read this manual carefully before using your NEC U300X/U250X/U310W/U260W projector and keep
the manual handy for future reference.
CAUTION
To turn off main power, be sure to remove the plug from power outlet.
The power outlet socket should be installed as near to the equipment as possible, and should be
easily accessible.
CAUTION
TO PREVENT SHOCK, DO NOT OPEN THE CABINET.
THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol warns the user that uninsulated voltage within the unit may be sufcient to cause
electrical shock. Therefore, it is dangerous to make any kind of contact with any part inside of
the unit.
This symbol alerts the user that important information concerning the operation and mainte-
nance of this unit has been provided.
The information should be read carefully to avoid problems.
WARNING: TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
DO NOT USE THIS UNIT’S PLUG WITH AN EXTENSION CORD OR IN AN OUTLET UNLESS ALL
THE PRONGS CAN BE FULLY INSERTED.
DOC Compliance Notice (for Canada only)
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.
Machine Noise Information Regulation - 3. GPSGV,
The highest sound pressure level is less than 70 dB (A) in accordance with EN ISO 7779.
Disposing of your used product
EU-wide legislation as implemented in each Member State requires that used electrical and elec-
tronic products carrying the mark (left) must be disposed of separately from normal household
waste. This includes projectors and their electrical accessories or lamps. When you dispose of
such products, please follow the guidance of your local authority and/or ask the shop where you
purchased the product.
After collecting the used products, they are reused and recycled in a proper way. This effort will
help us reduce the wastes as well as the negative impact such as mercury contained in a lamp
to the human health and the environment at the minimum level. The mark on the electrical and
electronic products only applies to the current European Union Member States.
WARNING TO CALIFORNIA RESIDENTS:
Handling the cables supplied with this product will expose you to lead, a chemical known to the State of
California to cause birth defects or other reproductive harm. WASH HANDS AFTER HANDLING.
ii
English ...
Important Information
RF Interference (for USA only)
WARNING
The Federal Communications Commission does not allow any modications or changes to the unit
EXCEPT those specied by NEC Display Solutions of America, Inc. in this manual. Failure to comply with
this government regulation could void your right to operate this equipment. This equipment has been test-
ed and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio / TV technician for help.
For UK only: In UK, a BS approved power cord with moulded plug has a Black (ve Amps) fuse installed for
use with this equipment. If a power cord is not supplied with this equipment please contact your supplier.
Important Safeguards
These safety instructions are to ensure the long life of your projector and to prevent re and shock. Please
read them carefully and heed all warnings.
Installation
Do not place the projector in the following conditions:
- on an unstable cart, stand, or table.
- near water, baths, or damp rooms.
- in direct sunlight, near heaters, or heat radiating appliances.
- in a dusty, smoky or steamy environment.
- on a sheet of paper or cloth, rugs or carpets.
If you wish to have the projector installed on the ceiling:
- Do not attempt to install the projector yourself.
- The projector must be installed by qualied technicians in order to ensure proper operation and reduce
the risk of bodily injury.
- In addition, the ceiling must be strong enough to support the projector and the installation must be in
accordance with any local building codes.
- Please consult your dealer for more information.
Place the projector in a horizontal position
The tilt angle of the projector should not exceed 15 degrees, nor should the projector be installed in any way
other than the desktop and ceiling mount, otherwise lamp life could decrease dramatically.
iii
English ...
Important Information
Fire and Shock Precautions
Ensure that there is sufcient ventilation and that vents are unobstructed to prevent the build-up of heat
inside your projector. Allow at least 4 inches (10cm) of space between your projector and a wall.
Do not try to touch the ventilation outlet as it can become heated while the projector is turned on and im-
mediately after the projector is turned off.
Prevent foreign objects such as paper clips and bits of paper from falling into your projector. Do not at-
tempt to retrieve any objects that might fall into your projector. Do not insert any metal objects such as a
wire or screwdriver into your projector. If something should fall into your projector, disconnect it immedi-
ately and have the object removed by a qualied service personnel.
Do not place any objects on top of the projector.
Do not touch the power plug during a thunderstorm. Doing so can cause electrical shock or re.
The projector is designed to operate on a power supply of 100-240V AC 50/60 Hz. Ensure that your power
supply ts this requirement before attempting to use your projector.
Do not look into the mirror while the projector is on. Serious damage to your eyes could result.
Keep any items (magnifying glass etc.) out of the light path of the projector. The light path being projected
from the mirror is extensive, therefore any kind of abnormal objects that can redirect light coming out of
the mirror, can cause unpredictable outcome such as a re or injury to the eyes.
Do not block the light path between the light source and the mirror with any objects. Doing so could cause
the object to catch on re.
Do not place any objects, which are easily affected by heat, in front of the projector mirror or a projector
exhaust vent.
Doing so could lead to the object melting or getting your hands burned from the heat that is emitted from
the light output and exhaust.
Handle the power cord carefully. A damaged or frayed power cord can cause electric shock or re.
- Do not use any power cord other than the one supplied.
- Do not bend or tug the power cord excessively.
- Do not place the power cord under the projector, or any heavy object.
- Do not cover the power cord with other soft materials such as rugs.
- Do not heat the power cord.
- Do not handle the power plug with wet hands.
Turn off the projector, unplug the power cord and have the projector serviced by a qualied service per-
sonnel under the following conditions:
- When the power cord or plug is damaged or frayed.
- If liquid has been spilled into the projector, or if it has been exposed to rain or water.
- If the projector does not operate normally when you follow the instructions described in this user’s
manual.
- If the projector has been dropped or the cabinet has been damaged.
- If the projector exhibits a distinct change in performance, indicating a need for service.
• Disconnect the power cord and any other cables before carrying the projector.
• Turn off the projector and unplug the power cord before cleaning the cabinet or replacing the lamp.
Turn off the projector and unplug the power cord if the projector is not to be used for an extended period
of time.
When using a LAN cable:
For safety, do not connect to the connector for peripheral device wiring that might have excessive voltage.
iv
English ...
Important Information
Remote Control Precautions
Handle the remote control carefully.
If the remote control gets wet, wipe it dry immediately.
Avoid excessive heat and humidity.
Do not short, heat, or take apart batteries.
Do not throw batteries into re.
If you will not be using the remote control for a long time, remove the batteries.
Ensure that you have the batteries’ polarity (+/–) aligned correctly.
Do not use new and old batteries together, or use different types of batteries together.
Dispose of used batteries according to your local regulations.
Lamp Replacement
To replace the lamp, follow all instructions provided on pages 61-62.
Be sure to replace the lamp when the message [THE LAMP HAS REACHED THE END OF ITS USABLE
LIFE. PLEASE REPLACE THE LAMP.] appears. If you continue to use the lamp after the lamp has
reached the end of its usable life, the lamp bulb may shatter, and pieces of glass may be scattered in the
lamp case. Do not touch them as the pieces of glass may cause injury.
If this happens, contact your dealer for lamp replacement.
A Lamp Characteristic
The projector has a high-pressure mercury lamp as a light source.
A lamp has a characteristic that its brightness gradually decreases with age. Also repeatedly turning the
lamp on and off will increase the possibility of its lower brightness.
CAUTION:
DO NOT TOUCH THE LAMP immediately after it has been used. It will be extremely hot. Turn the
projector off and then disconnect the power cord. Allow at least one hour for the lamp to cool before
handling.
When removing the lamp from a ceiling-mounted projector, make sure that no one is under the projec-
tor. Glass fragments could fall if the lamp has been burned out.
Note for US Residents
The lamp in this product contains mercury. Please dispose according to Local, State or Federal Laws.
Health precautions to users viewing 3D images
Before viewing, be sure to read health care precautions that may be found in the user’s manual included
with your LCD shutter eyeglasses or your 3D compatible content such as DVDs, video games, com-
puter’s video les and the like.
To avoid any adverse symptoms, heed the following:
- Do not use LCD shutter eyeglasses for viewing any material other than 3D images.
- Allow a distance of 2 m/7 feet or greater between the screen and a user. Viewing 3D images from too
close a distance can strain your eyes.
- Avoid viewing 3D images for a prolonged period of time. Take a break of 15 minutes or longer after
every hour of viewing.
- If you or any member of your family has a history of light-sensitive seizures, consult a doctor before
viewing 3D images.
- While viewing 3D images, if you get sick such as nausea, dizziness, queasiness, headache, eyestrain,
blurry vision, convulsions, and numbness, stop viewing them. If symptoms still persist, consult a doc-
tor.
v
English ...
Important Information
About High Altitude mode
Set [Fan Mode] to [High] when using the projector at altitudes approximately 2500 feet/760 meters or
higher.
Using the projector at altitudes approximately 2500 feet/760 meters or higher without setting to [High]
can cause the projector to overheat and the protector could shut down. If this happens, wait a couple
minutes and turn on the projector.
Using the projector at altitudes less than approximately 2500 feet/760 meters and setting to [High] can
cause the lamp to overcool, causing the image to icker. Switch [Fan Mode] to [Auto].
Using the projector at altitudes approximately 2500 feet/760 meters or higher can shorten the life of opti-
cal com ponents such as the lamp.
About Copyright of original projected pictures:
Please note that using this projector for the purpose of commercial gain or the attraction of public attention
in a venue such as a coffee shop or hotel and employing compression or expansion of the screen image with
the following func tions may raise concern about the infringement of copyrights which are protected by copy-
right law. [Aspect Ratio], [Keystone], Magnifying feature and other similar features.
1
... English
Table of Contents
Table of Contents...............................1
Usage Notice .....................................2
Precautions .........................................2
Introduction ........................................4
Product Features ................................4
Package Overview ..............................5
Product Overview ...............................6
Projector .................................................6
Connection Ports .................................... 7
Control Panel.......................................... 8
Removing and Attaching the Cable
Cover ...................................................... 9
Remote Control .................................... 10
Battery Installation ................................ 13
Using the Downloadable Software ....... 14
Installation .......................................23
Connecting the Projector ..................23
Connect to Computer/Notebook/
Network ................................................ 23
Connect to Video Sources .................... 24
Powering On/Off the Projector ..........25
Powering On the Projector ................... 25
Powering Off the Projector ................... 26
Warning Indicator ................................. 27
Adjusting the Projected Image ..........28
Adjusting the Height of Projector
Image ...................................................28
Adjusting the Projector Focus .............. 29
Adjusting Projection Image Size........... 29
Throw Distance and Screen Size ......... 30
User Controls...................................31
On Screen Display ............................31
How to operate .................................... 31
Menu Tree ........................................... 32
IMAGE .................................................. 34
IMAGE | Advanced ............................... 36
SCREEN ..............................................38
SCREEN | 3D Settings ......................... 40
SETTING .............................................. 41
SETTING | Signal (RGB) ...................... 43
SETTING | Advanced ........................... 44
SETTING | Advanced | Network ........... 45
SETTING | Advanced | Security ........... 48
OPTIONS ............................................. 50
OPTIONS | Lamp/Filter Settings .......... 52
OPTIONS | Information ........................ 53
OPTIONS | Advanced ..........................54
Appendices ......................................55
Troubleshooting ................................55
Cleaning the Filter .............................60
Replacing the lamp ..........................61
Cleaning procedure for the
aspherical mirror and lens ................63
Specications ....................................64
Compatibility Modes .........................66
Analog RGB .........................................66
HDMI .................................................... 66
Component ........................................... 67
Composite Video / S-Video .................. 67
Ceiling Mount Installation ..................68
Cabinet Dimensions ..........................69
Pin Assignments of D-Sub
COMPUTER Input Connector ...........70
PC Control Codes and Cable
Connection ........................................71
Troubleshooting Check List...............72
TCO Certication ..............................74
2
English ...
Usage Notice
Precautions
Follow all warnings, precautions and maintenance as recom-
mended in this user’s guide to maximize the life of your unit.
Warning-
This projector will detect the life of the lamp
itself. Please be sure to change the lamp when it
shows warning messages.
Warning-
Reset the “Clear Lamp Hours” function from
the on-screen display “OPTIONS |Lamp/Filter
Settings” menu after replacing the lamp module
(refer to page 52).
Warning-
When switching the projector off, please ensure
the cooling cycle has been completed before
disconnecting power. Allow 25 seconds for the
projector to cool down.
Warning-
Turn on the projector rst and then the signal
sources.
Warning-
When the lamp reaches the end of its life, it will
burn out and may make a loud popping sound.
If this happens, the projector will not turn back
on until the lamp module has been replaced. To
replace the lamp, follow the procedures listed
under “Replacing the Lamp”.
Turkish RoHS information relevant for Turkish market
EEE Yonetmeliğine Uygundur.
This device is not intended for use in the direct eld of view
at visual display workplaces. To avoid incommoding reec-
tions at visual display workplaces this device must not be
placed in the direct eld of view.
High gain type screens are not optimal for use with this
projector. The lower the screen gain (i.e., screen gain on the
order of 1), the better the appearance of the projected image.
3
... English
Usage Notice
Do:
Turn off the product before cleaning.
Use a soft cloth moistened with mild detergent to clean the
display housing.
Disconnect the power plug from AC outlet if the product is not
being used for a long period of time.
If the mirror or lens is soiled, use a commercially available clean-
ing cloth for lens.
Do not:
Use abrasive cleaners, waxes or solvents to clean the unit.
Use under the following conditions:
- Extremely heat, cold or humidity.
- In areas susceptible to excessive dust and dirt.
- In direct sunlight.
- Move the projector by holding the cable cover.
- Hang from the projector in a ceiling or wall mounted instal-
lation.
- Apply excessively strong pressure against the mirror or lens.
- Keep nger prints off the mirror surface.
4
English ...
Introduction
Product Features
This product is an XGA/WXGA single chip 0.55”/0.65”
DLP
TM
projector. Outstanding features include:
U300X/U250X
True XGA, 1024 x 768 addressable pixels
U310W/U260W
True WXGA, 1280 x 800 addressable pixels
Single chip DLP
TM
technology
NTSC/NTSC4.43/PAL/PAL-M/PAL-N/SE-
CAM and SDTV(480i/576i), EDTV(480p/576p),
HDTV(720p/1080i/1080p) compatible
Multi-Auto functions: Auto detection, Auto image and
Auto saving the adjustments
Full function remote control
User friendly multilingual on screen display
Advanced digital keystone correction and high quality
full screen image re-scaling
Built-in mono 10-Watt speaker.
UXGA/WXGA/SXGA+/SXGA/XGA/SVGA/VGA/
MAC compatible
3D features supported
5
... English
Introduction
Power Cord (3m)x1
Computer Cable (VGA) (3m)
(P/N:79TC3081)
Remote Control
(P/N:79TC3051)
Projector
Package Overview
This projector comes with all the items shown below. Check to
make sure your unit is complete. Contact your dealer immedi-
ately if anything is missing.
Due to the differ-
ence in applications
for each country, some
regions may have dif-
ferent accessories.
Documentation:

NEC Projector CD-ROM
(P/N: 7N951534)

Quick Setup Guide (P/N:
7N8N1121)

Important Information (For
North America: 7N8N1101)
(For Other countries than
North America: 7N8N1101
and 7N8N1111)
For North America:
Registration Card
Limited Warranty
Batteries (AAAx2)
The cable cover
is attached to the
projector at the time of
shipment. When you
use the projector for
the rst time, remove
the cable cover before
connecting cables. Refer
to page 9 for removing
and attaching the cable
cover.
For Europe:

Guarantee Policy
For customers in Europe:You will nd our current valid Guarantee
Policy on our Web Site:www.nec-display-solutions.com
Do not throw
away the mirror cover,
carton, and packing
materials.
US (P/N:79TC3011) EU (P/N:79TC3021)
6
English ...
Introduction
1. Lamp Cover
2. Ventilation (outlet)
3. Control Panel
4. Mirror
5. Cable Cover
6. Release rings for Cable
Cover
7. Kensington
TM
Lock Port
(This security slot sup-
ports the MicroSaver
®
Projector
Product Overview
13
2
6
11
10
7
8
6
5
1
3
4
12
2
9
Security System)
8. Tilt Adjusting Feet
9. Ventilation (inlet)
10. Lens
11. Focus Lever
12. Remote Sensor
13. Speaker
7
... English
Introduction
Connection Ports
1. LAN Connector
2. S-VIDEO IN Connector
3. MONITOR OUT Connector
4. COMPUTER 1 IN Connector
5. COMPUTER 2 IN Connector
6. HDMI Connector
7. PC CONTROL Connector
8. SERVICE Port (for service purpose only)
9. VIDEO IN Connector
10. AUDIO IN L/R Connector
11. AC IN
12. AUDIO OUT Connector
13. AUDIO IN Jack (For COMPUTER 1 IN)
14. AUDIO IN Jack (For COMPUTER 2 IN)
15. Ventilation (inlet)
1 2 3 4 5 6
9 11
7
8 10 12 13 14
15
8
English ...
Introduction
Control Panel
2
3
6
7
1
10
8
8
11
9
5
4
1 POWER ON/
OFF and LED
indicator
Power on the projector. Refer to
the “Power On/Off the Projec-
tor” section on pages 25-26.
2 SOURCE Press “SOURCE” to select an
input signal.
3 STATUS LED Indicate the projector’s tempera-
ture status.
4 VOLUME - Decrease speaker volume.
5 MENU Press “MENU” to launch the
Onscreen display (OSD), back to
the top level of OSD for the OSD
main menu operation
6 AUTO ADJ. Automatically synchronize the
projector to the input source.
7 LAMP LED Indicate the projector’s lamp
status.
9
... English
Introduction
8 KEYSTONE
Correction
Adjust the image to compensate
for distortion caused by tilt-
ing the projector (vertical ± 40
degrees).
9 VOLUME + Increase speaker volume.
10 Four
Directional
Select Keys
Use or or or to select
items or make adjustments to
your selection.
11 EXIT Exit the settings.
Removing and Attaching the Cable Cover
Procedure for Removing and Attaching the Cable Cover:
1. Release the left and right rings on both sides of the cable
cover.
2. Remove the cable cover.
3. Install the cable cover by reversing the previous steps.
2
1
1
2
Cable Cover
10
English ...
Introduction
Remote Control
1 POWER ON Power on the projector. Refer to
the “Power On/Off the Projec-
tor” section on pages 25-26.
2 POWER OFF Power off the projector.Refer to
the “Power On/Off the Projec-
tor” section on pages 25-26.
3
4
5
15
8
9
10
12
16
19
21
23
24
26
22
11
1
14
2
6
18
17
7
20
13
25
27
11
... English
Introduction
3 COMPUTER 1 Press “1” to choose COMPUTER
1 IN connector.
4 COMPUTER 2 Press “2” to choose COMPUTER
2 IN connector.
5 VIDEO Press “VIDEO” to choose VIDEO
IN connector.
6 NUM Select password. When you
input a password, you must
press “NUM” and other number
button simultaneously.
7 AV-MUTE Momentarily turn off/on the
audio and video.
8 MENU Press “MENU” to launch the
Onscreen display (OSD), back to
the top level of OSD for the OSD
main menu operation
9 D-ZOOM Zoom in/out the projected im-
age.
10 L-CLICK Mouse left click.
11 KEYSTONE
Correction
Adjust the image to compensate
for distortion caused by tilt-
ing the projector (vertical ± 40
degrees).
12 ECO Dim the projector lamp which
will lower power consumption
and extend the lamp life. (refer
to page 52)
13 HELP This function ensures easy setup
and operation.
14 AUTO ADJ. Automatically synchronize the
projector to the input source.
15 S-VIDEO Press “S-VIDEO” to choose S-
VIDEO IN connector.
16 HDMI Press “HDMI” to choose HDMI
IN connector.
12
English ...
Introduction
17 Number Button Select password.
18 CLEAR Clear the number while you
input the password.
19 FREEZE Freeze To pause the screen im-
age. Press again to resume the
screen image.
20 EXIT Exit the settings.
21 ENTER Conrm your section of items in
sub menu operation.
22 Four
Directional
Select Buttons
Use or or or to select
items or make adjustments to
your selection. When the image
is enlarged by using the D-
ZOOM + button, the , , or
button moves the image.
23 PAGE Use this button to page up or
page down.
24 R-CLICK Mouse right click.
25 PICTURE
Mode
Select the Picture mode from
Presentation, Movie, sRGB,
Game and User.
26 VOL. +/- Increase/decrease speaker vol-
ume.
27 ASPECT Use this function to choose your
desired aspect ratio. (refer to
page 38)
When the reduced
image is displayed,
the , , or
button is not available
to move the image.
13
... English
Introduction
Battery Installation
Remote Control Precautions
• Handle the remote control carefully.
• If the remote control gets wet, wipe it dry immediately.
• Avoid excessive heat and humidity.
• Do not place the battery upside down.
1. Press rmly and slide the battery cover off.
2. Install new batteries (AAA).
Ensure that you have the
batteries’ polarity (+/–)
aligned correctly.
3. Slip the cover back over the
batteries until it snaps into
place. Do not mix different
types of batteries or new and
old batteries.
CAUTION:
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the manu-
facturer.
Dispose of used batteries according to your local regulations.
The infrared signal
operates by line-of-
sight up to a distance
of about 22 feet/7 m
and within a 60-degree
angle of the remote
sensor on the projector
cabinet.
The projector will
not respond if there
are objects between
the remote control
and the sensor, or if
strong light falls on the
sensor. Weak batteries
will also prevent the
remote control from
properly operating the
projector.
14
English ...
Introduction
Using the Downloadable Software
Using the Computer Cable (VGA) to Operate the
Projector (Virtual Remote Tool)
Using the utility software “Virtual Remote Tool” that you can
download from our web site (http://www.nec-display.com/
dl/en/index.html), Virtual Remote screen (or toolbar) can be
displayed on your computer screen.
This will help you perform operations such as projector’s power
on or off and signal selection via the computer cable (VGA), se-
rial cable, or LAN connection.
Virtual Remote screen Toolbar
This section provides an outline of preparation for use of Virtual Re-
mote Tool.
For information on how to use Virtual Remote Tool, see Help of Vir-
tual Remote Tool. (-> page 18)
Step 1: Install Virtual Remote Tool on the computer. (-> page 15)
Step 2: Connect the projector to the computer. (-> page 16)
Step 3: Start Virtual Remote Tool. (-> page 17)
TIP:
Virtual Remote Tool can be used with a LAN and a serial connection.
For update information on Virtual Remote Tool, visit our website:
http://www.nec-display.com/dl/en/index.html
TIP:
The projector’s COMPUTER 1 IN connector supports DDC/CI (Display
Data Channel Command Interface). DDC/CI is a standard interface for
bidirectional communication between display/projector and computer.
When “Computer
1” is selected for input,
the Virtual Remote
screen or the toolbar
will be displayed as
well as your computer
screen.
Use the supplied
computer cable (VGA)
to connect the COM-
PUTER 1 IN connector
directly with the moni-
tor output connector
of the computer to use
Virtual Remote Tool.
Using a switcher or
other cables than the
supplied computer
cable (VGA) may
cause failure in signal
communication.
VGA cable connector:
Pin Nos. 12 and 15 are
required for DDC/CI.
Virtual Remote
Tool may not work
depending on your
computer’s specica-
tions and version of
graphic adapters or
drivers.
The projector does
not support the LAN
automatic search fea-
ture of Virtual Remote
Tool. To connect the
projector, register an
IP address manually.
15
... English
Introduction
Step 1: Install Virtual Remote Tool on the computer
Supported OS
Virtual Remote Tool will run on the following operating systems.
Windows 7 Home Basic *1, Windows 7 Home Premium *1, Windows 7
Professional *1, Windows 7 Enterprise *1, Windows 7 Ultimate *1
Windows Vista Home Basic *1, Windows Vista Home Premium *1, Windows
Vista Business *1, Windows Vista Enterprise *1, Windows Vista Ultimate
*1
Windows XP Home Edition *2, Windows XP Professional *2
*1: Supports 32-bit version.
*2: To run Virtual Remote Tool, “Microsoft .NET Framework Version 2.0 or
later” is required. The Microsoft .NET Framework Version 2.0 or later is
available from Microsoft’s web page. Install the Microsoft .NET Framework
Version 2.0 or later on your computer.
1 Download the updated VRT exe le from our web site
(http://www.nec-display.com/dl/en/index.html).
2 Double-click the VRT. exe icon.
The Installer will start and the Wizard screen will appear.
3 Click “Next”.
“END USER LICENSE AGREEMENT” screen will be displayed.
Read “END USER LICENSE AGREEMENT” carefully.
To install or unin-
stall the program, the
Windows user account
must have [Admin-
istrator] privilege
(Windows 7, Windows
Vista and Windows
XP)
Exit all running
programs before
installation. If another
program is running,
the installation may
not be completed.
16
English ...
Introduction
4 If you agree, click “I accept the terms in the license agreement” and then
click “Next”.
Follow the instructions on the installer screens to complete the
installation.
After the installation is completed, the shortcut icon for Virtual
Remote Tool
TIP:Uninstalling Virtual Remote Tool
Preparation:
Exit Virtual Remote Tool before uninstalling. To uninstall Virtual Remote
Tool, the Windows user account must have “Administrator” privilege
(Windows 7 and Windows Vista) or “Computer Administrator” privilege
(Windows XP).
For Windows 7/Windows Vista
1 Click “Start” and then “Control Panel”.
The Control Panel window will be displayed.
2 Click “Uninstall a program” under “Programs”
The “Programs and Features” window will be displayed.
3 Select Virtual Remote Tool and click it.
4 Click “Uninstall/Change” or “Uninstall”.
When the “User Account Control” window is displayed, click “Continue”.
Follow the instructions on the screens to complete the uninstallation.
For Windows XP
1 Click “Start” and then “Control Panel”.
The Control Panel window will be displayed.
2 Double-click “Add / Remove Programs”.
The Add / Remove Programs window will be displayed.
3 Click Virtual Remote Tool from the list and then click “Remove”.
Follow the instructions on the screens to complete the uninstallation.
Step 2: Connect the projector to the computer
1 Use the supplied computer cable (VGA) to connect the COMPUTER 1 IN
connector of the projector directly with the monitor output connector of the
computer.
17
... English
Introduction
2 Connect the supplied power cord to the AC IN of the projector and the wall
outlet.
The projector is in the standby condition.
TIP:
When Virtual Remote Tool starts for the rst time, “Easy Setup”
window will be displayed to navigate your connections.
Step 3: Start Virtual Remote Tool
Start using the shortcut icon
Start from the Start menu
Click [Start] -> [All Programs] or [Programs] -> [NEC Projector
User Supportware] -> [Virtual Remote Tool] -> [Virtual Remote
Tool].
When Virtual Remote Tool starts for the rst time, “Easy Setup”
window will be displayed.
Follow the instructions on the screens.
When “Easy Setup” is completed, the Virtual Remote Tool screen
will be displayed.
When “Power-
Saving” is selected for
“Standby Mode” from
the menu, the projector
cannot be controlled
via the computer cable
(VGA), serial cable or
network (wired LAN)
connection.
18
English ...
Introduction
TIP:
The Virtual Remote Tool screen (or Toolbar) can be displayed without
displaying “Easy Setup” window.
To do so, click to place a check mark for “Do not use Easy Setup next time”
on the screen at Step 6 in “Easy Setup”.
Exiting Virtual Remote Tool
1 Click the Virtual Remote Tool icon on the Taskbar.
The pop-up menu will be displayed.
2 Click “Exit”.
The Virtual Remote Tool will be closed.
Viewing the help le of Virtual Remote Tool
Displaying the help le using the taskbar
1 Click the Virtual Remote Tool icon on the taskbar when Virtual Remote
Tool is running.
The pop-up menu will be displayed.
19
... English
Introduction
2 Click “Help”.
The Help screen will be displayed
Displaying the help le using the Start Menu.
Click “Start” -> “All programs” or “Programs” -> “NEC Projector
User Supportware” -> “Virtual Remote Tool” and then “Virtual
Remote Tool Help” in this order.
The Help screen will be displayed.
20
English ...
Introduction
Controlling the Projector over a LAN (PC Control
Utility Pro 4)
Using the utility software “PC Control Utility Pro 4” that you
can download from our web site
(http://www.nec-display.com/dl/en/index.html), the projector
can be controlled from a computer over a LAN.
Control Functions
Power On/Off, signal selection, picture freeze, picture mute,
audio mute, adjusting, error message notication, event sched-
ule.
Screen of PC Control Utility Pro 4
This section provides an outline of preparation for use of PC Control
Utility Pro 4. For information on how to use PC Control Utility Pro 4,
see Help of PC Control Utility Pro 4. (-> page 22)
Step 1: Install PC Control Utility Pro 4 on the computer. (-> page 21)
Step 2: Connect the projector to a LAN. (-> page 22)
Step 3: Start PC Control Utility Pro 4. (-> page 22)
TIP:
PC Control Utility Pro 4 can be used with a serial connection.
For update information on PC Control Utility Pro 4, visit our website:
http://www.nec-display.com/dl/en/index.html
When the projec-
tor is in the standby
condition, the Error
Alert function of PC
Control Utility Pro4 is
not available.
To make this function
available even in the
standby condition, use
the E-Mail Alert func-
tion of the projector.
(-> page 46)
21
... English
Introduction
Step 1: Install PC Control Utility Pro 4 on the computer
Supported OS - PC Control Utility Pro 4 will run on the following
operating systems.
Windows 7 Home Basic *1, Windows 7 Home Premium *1, Windows 7
Professional *1, Windows 7 Enterprise *1, Windows 7 Ultimate *1
Windows Vista Home Basic *1, Windows Vista Home Premium *1, Windows
Vista Business *1, Windows Vista Enterprise *1, Windows Vista Ultimate
*1
Windows XP Home Edition *2, Windows XP Professional *2
*1: Supports 32-bit version.
*2: To run PC Control Utility Pro 4, “Microsoft .NET Framework Version 2.0
or later” is required. The Microsoft .NET Framework Version 2.0 or later is
available from Microsoft’s web page. Install the Microsoft .NET Framework
Version 2.0 or later on your computer.
1 Download the updated PCCUP4 exe le from our web site (http://www.nec-
display.com/dl/en/index.html).
2 Double-click the PCCUP4. exe icon.
The Installer will start and the Wizard screen will appear.
3 Click “Next”.
“END USER LICENSE AGREEMENT” screen will be displayed.
To install or unin-
stall the program, the
Windows user account
must have [Admin-
istrator] privilege
(Windows 7, Windows
Vista and Windows
XP)
Exit all running
programs before
installation. If another
program is running,
the installation may
not be completed.
22
English ...
Introduction
Read “END USER LICENSE AGREEMENT” carefully.
4 If you agree, click “I accept the terms in the license agreement” and then
click “Next”.
Follow the instructions on the installer screens to complete the
installation.
TIP:Uninstalling PC Control Utility Pro 4
To uninstall PC Control Utility Pro 4, do the same procedures stated as in
“Uninstalling Virtual Remote Tool”. Read “Virtual Remote Tool” as “PC
Control Utility Pro 4” (-> page 16)
Step 2: Connect the projector to a LAN
Connect the projector to the LAN by following the instructions
in “Connecting the Projector” on page 23 and “How to use web
browser to control your projector” in pages 46-47.
Step 3: Start PC Control Utility Pro 4
Click “Start” -> “All programs” or “Programs” -> “NEC Projector
User Supportware” -> “PC Control Utility Pro 4” -> “PC Control
Utility Pro 4”.
TIP: Viewing the Help of PC Control Utility Pro 4
Displaying the Help le of PC Control Utility Pro 4 while it is running.
Click “Help (H)” -> “Help (H)” of window of PC Control Utility Pro 4 in
this order.
The pop-up menu will be displayed.
Displaying the help le using the Start Menu.
Click “Start” -> “All programs” or “Programs” -> “NEC Projector User
Supportware” -> “PC Control Utility Pro 4” -> “PC Control Utility Pro 4
Help”.
The Help screen will be displayed.
For the Schedule
function of the PC
Control utility Pro 4 to
work, you must have
your computer run-
ning and not in stand-
by/sleep mode. Select
“Power Options” from
the “Control Panel” in
Windows and disable
its standby/sleep
mode before running
the scheduler.
[Example] For Win-
dows 7:
Select “Control
Panel” -> “System and
Security” -> “Power
Options” -> “Change
when the computer
sleeps” -> “Put the
computer to sleep” ->
”Never”.
When “Power-
Saving” is selected for
“Standby Mode” from
the menu, the projector
cannot be controlled
via the serial cable or
network (wired LAN)
connection.
The projector
does not support the
LAN automatic search
feature of PC Control
Utility Pro 4. To con-
nect the projector,
register an IP address
manually.
23
... English
Installation
E62405SP
R
Connecting the Projector
1.............................................................................................Power cord (supplied)
2..........................................................................................................Network Cable
3...........................................................................................................VGA out cable
4...........................................................................................................Audio in cable
5........................................................................ Computer cable (VGA) (supplied)
6...............................................................................................................HDMI cable
7................................................................................................................RS232 cable
8........................................................................................................ Audio out cable
1
3
2
4 5
To the wall outlet
Make sure that the
power plug is fully
inserted into both the
projector AC inlet and
the wall outlet.
Connect to Computer/Notebook/Network
6 7
8
Audio Output
24
English ...
Installation
E62405SP
R
Due to the differ-
ence in applications
for each country, some
regions may have differ-
ent accessories.
Video Output
S-Video Output
Connect to Video Sources
DVD Player, Blu-ray Player,
Set-top Box, HDTV receiver
Audio Output
1.............................................................................................Power cord (supplied)
2............................................................................................ Composite video cable
3............................................................................................................ S-Video cable
4...........................................................................................................Audio in cable
5........................................................................ Computer cable (VGA) (supplied)
6.............................................................................................SCART/VGA adaptor
7...............................................................................................................HDMI cable
8...........................................................................................................Audio in cable
8........................................................................................................ Audio out cable
To the wall outlet
Make sure that the
power plug is fully
inserted into both the
projector AC inlet and
the wall outlet.
1
2
3
4
6
5
7 8
9
HDMI cable: Use High Speed HDMI
®
Cable.
25
... English
Installation
Powering On the Projector
1. Ensure that the power cord and signal cable are securely
connected. The Power LED will turn orange or red
(*)
.
2. Turn on the lamp by pressing “POWER ON” on the remote
control or on the control panel. The Power LED will ash
blue. The startup screen (NEC logo) will display and the
Power LED will turn blue.
4. Turn on your source (computer, notebook, video player,etc.)
The projector will detect your source automatically.
If you connect multiple sources at the same time, use the
SOURCE button on the control panel or use “COMPUTER
1”, “COMPUTER 2”, “S-VIDEO”, “VIDEO”, “HDMI”on the
remote control to switch inputs.
Powering On/Off the Projector
Turn on the projector
rst and then the signal
sources.
or
(*)When “Power-
Saving” is selected for
“Standby Mode”,the
Power LED will turn
red: when “Normal” is
selected for “Standby
Mode”, the Power LED
will turn orange.
Before using the
projector, remove the
mirror cover.
26
English ...
Installation
Powering Off the Projector
1. Press the POWER OFF button on the remote control or the
button on the control panel to turn off the projector lamp,
you will see a message as below on the on-screen display.
2. Press the “POWER OFF” button again to conrm.
3. The cooling fan continues to operate for about 25 seconds
during the cool down period and the Power LED will ash
blue. When the light turns orange or red, the projector has
entered standby mode.
If you wish to turn the projector back on, you must wait
until the projector has completed the cooling cycle and has
entered standby mode. Once in standby mode, simply press
the POWER ON button on the remote control or the
button on the control panel to restart the projector.
4. Disconnect the power cord from the electrical outlet and the
projector.
5. Do not turn on the projector immediately following a power
off procedure.
27
... English
Installation
Warning Indicator
When the “STATUS” LED indicator ashes red, it indicates
the projector has overheated. The projector will automati-
cally shut itself down.
When the “LAMP” LED indicator turns red and the message
below displays on-screen, the projector has detected that the
lamp is approaching its end of life. When you see this mes-
sage, change the lamp as soon as possible.
When the “STATUS” LED indicator ashes red and the
message below displays on-screen, it indicates the fan failed.
Stop using the projector and disconnect the power cord from
the electrical outlet, then contact your local dealer or our
service center.
28
English ...
Installation
0.45”/
11.46mm
Adjusting the Projected Image
Adjusting the Height of Projector Image
The projector is equipped with adjustable feet to raise and lower
the image to ll the screen.
1. Rotate the tilt adjustable feet counter clockwise to raise the
projector or clockwise to lower it. Repeat with the remain-
ing feet as needed.
Tilt adjusting feet
29
... English
Installation
Focus Lever
Adjusting the Projector Focus
Adjusting Projection Image Size
To focus the image, rotate the focus lever until the image is
clear.
U300X/U250X series: The projector will focus at distances
from 19” to 26”/475 to 662 mm .
U310W/U260W series: The projector will focus at distances
from 19” to 26”/495 to 661 mm .
U300X/U250X series: Projection Image Size from 63” to 85”
(1.600 to 2.159 meters).
U310W/U260W series: Projection Image Size from 77” to
100” (1.956 to 2.540 meters).
30
English ...
Installation
B=> Vertical distance between lens
center and screen center
C=> Horizontal distance between screen
and projector
E=> Throw distance
D=> Vertical distance between lens
center and bottom of screen (top of
screen for ceiling mount)
α=> Throw angle
(W)
(H)
(B)
(D)
(C)
Screen Diagonal
Lens Center
Screen Center
Throw Angle (α)
(E)
Screen Size
(B) (C) (D) (E)
(α)
Diagonal Width (W) Height (H)
inch mm inch mm inch mm inch mm inch mm inch mm inch mm degree
77 1956 65 1659 41 1037 31 777 6 153 10 259 19 495 55.3
80 2032 68 1723 42 1077 32 808 7 174 11 269 20 516 55.3
85 2159 72 1831 45 1144 34 858 8 214 11 286 22 568 55.3
87.2 2215 74 1878 46 1174 35 880 9 226 12 293 22 569 55.3
90 2286 76 1939 48 1212 36 909 10 246 12 303 23 588 55.3
95 2413 81 2046 50 1279 38 959 11 283 13 320 25 625 55.3
100 2540 85 2154 53 1346 40 1010 13 319 13 337 26 661 55.3
U310W/U260W
This graph is for user’s reference only.
Throw Distance and Screen Size
Screen Size
(B) (C) (D) (E)
(α)
Diagonal Width (W) Height (H)
inch mm inch mm inch mm inch mm inch mm inch mm inch mm degree
63 1600 50 1280 38 960 29 749 5 133 11 269 19 475 55.3
65 1651 52 1321 39 991 30 773 6 150 11 277 19 492 55.3
70 1778 56 1422 42 1067 33 832 8 192 12 299 21 534 55.3
75 1905 60 1524 45 1143 35 892 9 235 13 320 23 577 55.3
77 1956 62 1565 46 1173 36 915 10 251 13 329 23 594 55.3
80 2032 64 1626 48 1219 37 951 11 277 13 341 24 619 55.3
85 2159 68 1727 51 1295 40 1010 13 320 14 363 26 662 55.3
U300X/U250X
31
... English
User Controls
The Projector has a multilingual On Screen Display that allows
you to make image adjustments and change a variety of set-
tings. The projector will automatically detect the source.
How to operate
1. To open the OSD, press the MENU button on the Remote Control.
2. When OSD is displayed, use the buttons to select any item
in the main menu. While making a selection on a particular page,
press the button to enter sub menu.
3. Use the buttons to select the desired item in the sub menu
and adjust the settings by using the or button.
4. If the setting has icon, you could press the ENTER button to
enter another sub menu. Press the MENU button to close the sub
menu after adjustment.
5. After adjusting the settings, press the MENU button go back to the
main menu.
6. To exit, press the MENU button again. The OSD will be closed and
the projector will automatically save the new settings.
On Screen Display
Main Menu
Sub Menu
If no button operation
is made for 30 seconds,
the OSD will be closed
automatically.
Setting
32
English ...
User Controls
Menu Tree
Main Menu Sub Menu Settings
IMAGE
Picture Mode
Wall Color
Brightness 0~100
Contrast 0~100
Sharpness 0~31
Saturation 0~100
Hue 0~100
Advanced Gamma Film / Video / Graphics / PC
0~10
Color Temp. Low / Medium / High
Color
Color Space AUTO / RGB / YUV
Input
Exit
SCREEN
Aspect Ratio
0~3
H Image Shift -50~50
V Image Shift -50~50
V Keystone -40 ~40
Digital Zoom 80~200
3D Settings 3D Off / On
3D Invert Off / On
3D Over/Under Off / On
Exit
SETTING
Language
Orientation
Menu Location
Signal Phase 0~31
Clock -5~5
H. Position -5~5
V. Position -5~5
Exit
ʳ
Mute Off / On
Volume 0~31
Presentation / High-Bright / Movie / sRGB /
Blackboard / Video / User1 / User2
Off / Red / Green / Blue / Cyan / Magenta /
Yellow
BrilliantColor™
Red Gain / Green Gain / Blue Gain / Red
Bias / Green Bias / Blue Bias / Cyan Gain /
Magenta Gain / Yellow Gain / Reset / Exit
HDMI / Computer 1 / Computer 2 / S-Video
/ Video / Exit
AUTO / 4:3 / 16:9 / 16:10 / 15:9 / 5:4 /
Native
Overscan
English / Deutsch / Français / Italiano /
Español / Português / Svenska /
Norsk/Dansk / Polski / Ɋɭɫɫɤɢɣ /
İȜȜȘȞȚțȐ / Magyar / ýeština / ϲΑήϋ /
խ֮ʳ/ 亞᫿խ֮ʳ/ ֲء፿ʳ0ᾂ᝖᱑ʳ/
Indonesia / Türkçe
33
... English
User Controls
Main Menu Sub Menu Settings
SETTING
Advanced Logo On / Off
PC Control Mode PC Control / LAN
Network
Closed Caption
Security
Video Level AUTO / Normal / Enhance
Exit
Network Network State Disconnect / Connect
DHCP Off / On
IP Address 0.0.0.0
0.0.0.0
Gateway 0.0.0.0
DNS 0.0.0.0
Apply Off / On
Exit
Security Security Off / On
Security Timer Month / Day / Hour / Exit
Change Password
ʳ
Exit
OPTIONS
Input Search Off / On
Fan Mode AUTO / High Speed
Information Hide Off / On
Background Color Black / Blue
Lamp Hours Used (Normal)
Lamp Hours Used (ECO)
Lamp Life Reminder Off / On
ECO Mode Off / On
Clear Lamp Hours
Filter Usage Hours
Clear Filter Usage Hours
Exit
Information
Advanced Standby Mode Normal / Power-Saving
Direct Power On Off / On
Auto Power Off (min.) 0~180
Off Timer (min.) 0~995
Control Panel Lock Off / On
Exit
Reset Off / On
Off / CC1 / CC2 / CC3 / CC4 / T1 / T2 /
T3 / T4
SETTING |
Advanced
Subnet mask
Lamp/FilterʳSettings
34
English ...
User Controls
Picture Mode
There are many factory presets optimized for various types of im-
ages. Use the or button to select the item.
Presentation: For computer or notebook.
High-Bright: Maximum brightness from PC input.
Movie: For home theater.
sRGB: Standardized accurate color.
Blackboard: This mode should be selected to achieve optimum
color settings when projecting onto a blackboard (green).
Video: This mode is recommended for typical TV program view-
ing.
User: Memorize user’s settings.
Wall Color
Use this function to choose a proper color according to the wall. It
will compensate the color deviation due to the wall color to show
the correct image tone.
Brightness
Adjust the brightness of the image.
Press the button to darken image.
Press the button to lighten the image.
Contrast
The contrast controls the degree of difference between the lightest
and darkest parts of the picture. Adjusting the contrast changes the
IMAGE
35
... English
User Controls
amount of black and white in the image.
Press the button to decrease the contrast.
Press the button to increase the contrast.
Sharpness
Adjust the sharpness of the image.
Press the button to decrease the sharpness.
Press the button to increase the sharpness.
Saturation
Adjust a video image from black and white to fully saturated color.
Press the button to decrease the amount of saturation in the
image.
Press the button to increase the amount of saturation in the
image.
Hue
Adjust the color balance of red and green.
Press the button to increase the amount of green in the image.
Press the button to increase the amount of red in the image.
Advanced
Refer to next page.
“Saturation” and
“Hue” functions
are only supported
under Video mode.
36
English ...
User Controls
The Color Temp is
not available when
“High-Bright” or
“sRGB” is selected
for “Picture mode”.
IMAGE | Advanced
Gamma
This allows you to choose a gamma table that has been ne-tuned
to bring out the best image quality for the input.
Film: for home theater.
Video: for video or TV source.
Graphics: for image source.
PC: for PC or computer source.
BrilliantColor™
This adjustable item utilizes a new color-processing algorithm
and system level enhancements to enable higher brightness while
providing true, more vibrant colors. The range is from “0” to “10”.
If you prefer a stronger enhanced image, adjust toward the maxi-
mum setting. For a smoother, more natural image, adjust toward
the minimum setting.
Color Temp
Adjust the color temperature. At higher temperature, the screen
looks colder; at lower temperature, the screen looks warmer.
37
... English
User Controls
Color
Press into the next menu as below and then use the
or
button to select item.
Red Gain/Green Gain/Blue Gain/Red Bias/Green Bias/Blue
Bias/Cyan Gain/Magenta Gain/Yellow Gain: Use the or
button to select Red, Green, Blue, Cyan, Magenta and Yellow
Colors.
Reset: Choose “Yes” to return the factory default settings for
color adjustments.
Color Space
Select an appropriate color matrix type from AUTO, RGB or YUV.
Input
Use this option to enable / disable input sources. Press to enter
the sub menu and select which sources you require. Press the EN-
TER button to finalize the selection. The projector will not search for
inputs that are not selected.
Exit
Press to return to the previous menu.
38
English ...
User Controls
SCREEN
Aspect Ratio
Use this function to choose your desired aspect ratio.
4:3: This format is for 4×3 input sources.
16:9: This format is for 16×9 input sources, like HDTV and DVD
enhanced for Wide screen TV.
16:10: This format is for 16×10 input sources, like widescreen
laptops.
15:9: This format is for non-16x9, letterbox source and for users
who use external 16x9 lens to display 1.67:1 aspect ratio using
full resolution.
5:4: This format is for 5×4 input sources.
Native: This format displays the original image without any
scaling.
AUTO: Automatically selects the appropriate display format.
Overscan
Overscan function removes the noise in a video image. Overscan the
image to remove video encoding noise on the edge of video source.
H Image Shift
Shift the projected image position horizontally.
V Image Shift
Shift the projected image position vertically.
Each I/O has
different setting of
“Overscan”.
39
... English
User Controls
V Keystone
Press the or button to adjust image distortion vertically. If
the image looks trapezoidal, this option can help make the image
rectangular.
Digital Zoom
Zoom in or out the image. The default image size is 100.
3D Settings
Refer to next page.
40
English ...
User Controls
TIP: 3D supported signal
For PC Signal :
640x480@120Hz, 640x480@60Hz,
800x600@120Hz, 800x600@60Hz,
1024x768@120Hz,1024x768@60Hz
1280x720@120Hz,1280x720@60Hz
For Video Signal :
480i@60Hz,480p@60Hz,720p@60Hz
3D
Choose “On” to turn this item on for 3D images.
3D Invert
Choose “On” to invert left and right frame contents.
Choose “Off” for default frame contents.
3D Over/Under
Choose “On” to invert over and under frame contents.
Choose “Off” for default frame contents.
Exit
Press to return to the previous menu.
3D Invert
and 3D Over/
Underonly avail-
able when 3D is
enabled.
Compatible 3D
source, 3D content
and active shutter
glasses are required
for 3D viewing.
SCREEN | 3D
Settings
41
... English
User Controls
SETTING
Language
Choose the multilingual OSD menu. Press the or button into
the sub menu and then use the or button to select your
preferred language. Press to nalize the selection.
Orientation
Desktop Front
This is the default selection. The image is projected straight on
the screen.
Desktop Rear
When selected, the image will appear reversed.
Ceiling Front
When selected, the image will turn upside down.
Rear-Desktop and
Rear-Ceiling are
to be used with a
translucent screen.
42
English ...
User Controls
Ceiling Rear
When selected, the image will appear reversed in upside down
position.
Menu Location
Choose the menu location on the display screen.
Signal
Refer to next page.
Mute
Choose “On” to turn mute on.
Choose “Off” to turn mute off.
Volume
Press the button to decrease the volume.
Press the button to increase the volume.
Advanced
Refer to page 44.
43
... English
User Controls
SETTING | Signal
(RGB)
Phase
Synchronize the signal timing of the display with the graphic card.
If the image appears to be unstable or ickers, use this function to
correct it.
Clock
Change the display data frequency to match the frequency of
your computer’s graphic card. Use this function only if the image
appears to icker vertically.
H. Position
Press the button to move the image left.
Press the button to move the image right.
V. Position
Press the button to move the image down.
Press the button to move the image up.
Exit
Press to return to the previous menu.
“Signal” is only
supported in
Analog VGA (RGB)
signal.
44
English ...
User Controls
SETTING |
Advanced
Logo
Use this function to display the startup screen (NEC logo).
On: Displays the NEC logo.
Off: Not display the NEC logo.
PC Control Mode
PC Control: Allow PC control of an individual projector. (De-
fault setting)
LAN: Allow projector control via web browser (Internet Ex-
plorer) using the network.
Network
Refer to next page.
Closed Caption
Use this function to enable close caption and activate the closed
caption menu. Select an appropriate closed captions option: Off,
CC1, CC2, CC3, CC4, T1, T2, T3 and T4.
Security
Refer to page 48.
Video Level
Select “AUTO to automatically detect video level. If automatic
detection may not work well, select “Normal to disable the “En-
hance feature of your HDMI equipment or select “Enhance” to
improve image contrast and increase detail in the dark areas.
Exit
Press to return to the previous menu.
When “Power-
Saving” is selected
for “Standby Mode”
from the menu, the
projector cannot
be controlled in
standby mode from
external equipment.
“Video Level” is
only supported un-
der HDMI source.
45
... English
User Controls
SETTING |
Advanced |
Network
Network Status
Display the network connection status.
DHCP
Use this function to select your desired startup screen. If you
change the setting from one to another, when you exit the OSD
menu, the new setting will take effect on next open.
On: Assign an IP address to the projector from an external
DHCP server automatically.
Off: Assign an IP address manually.
IP Address
Select an IP address.
Subnet Mask
Select subnet mask number.
Gateway
Select the default gateway of the network connected to the
projector.
DNS
Select DNS number.
Apply
Press and then choose “On” to apply the selection.
Exit
Press to return to the previous menu.
46
English ...
User Controls
1. Turn on DHCP to allow the DHCP server to automatically assign
an IP, or manually enter the required network information.
2. Then choose apply and press button to complete the
conguration process.
3. Open your web browser and type in from the OSD LAN screen
then the web page will display as below:
4. Open “Projector Status and Control to control your projector.
When making a direct connection from your computer to the
projector
Step 1: Find an IP Address (default:192.168.0.100) from LAN
function of projector.
192.168.0.100
How to use web browser to control your projector
When you used
the projector IP
address, you can
not link to your
service server.
47
... English
User Controls
Step 2: Select apply and press the ENTER button on the remote control or the control
panel to submit function or press the MENU button on the remote control or
the control panel to exit.
Step 3: To open Network Connections, click
Start
, click
Control Panel
, click
Network
and Internet Connections
, and then click
Network Connections
. Click the
connection you want to congure, and then, under
Network Tasks
, click
Change settings of this connection
.
Step 4: On the
General
tab, under
This
connection uses the following
items
, click
Internet Protocol
(TCP/IP)
, and then click
“Properties.
Step 5: Click
Use the following IP
address
, and type in as below:
1) IP address: 192.168.0.100
2) Subnet mask: 255.255.255.0
3) Default gateway:192.168.0.254
Step 6: To open Internet Options, click
IE web browser, click Internet
Options, click the
Connections tab
and click “LAN Settings...
Step 7: The
Local Area Network (LAN)
Setting
dialog box appears
,
In
the
Proxy Server area
, cancel the
Use a proxy server for your LAN
check box
., then click “OK button
twice.
Step 8: Open your IE and type in the IP
address of 192.168.0.100 in the
URL then press the ENTER button
key.
Step 9: Open “Projector Status and
Control to control your projector.
48
English ...
User Controls
SETTING |
Advanced |
Security
Security
On: Choose “On” to use security verication when turning on
the projector.
Off: Choose “Off” to be able to switch on the projector without
password verication.
Security Timer
Use this function to set how long (Month/Day/Hour) the
projector can be used. Once this time has elapsed you will be
requested to enter your password again.
Change Password
First time:
1. Press to set the password.
2. The password has to be 4 digits.
3. Use number buttons on the remote control to enter your
new password and then press key to conrm your
password.
Change Password:
1. Press to input old password.
2. Use number buttons to enter the current password and then
press to conrm.
3. Enter a new password (4 digits in length) using the number
buttons on the remote control, then press to conrm.
4. Enter the new password again and press to conrm.
Password default
value is “1234” (rst
time).
When you input
the password, you
must press the NUM
button and other
number button on
the remote control at
the same time.
49
... English
User Controls
If the incorrect password is entered 3 times, the projector will
automatically shut down.
If you have forgotten your password, please contact your local
ofce for support.
Exit
Press to return to the previous menu.
50
English ...
User Controls
Input Search
On: The projector will search for other signals if the current
input signal is lost.
Off: The projector will only search current input connection.
Fan Mode
AUTO: The built-in fans automatically run at a variable speed
according to the internal temperature.
High: The built-in fans run at high speed.
The built-in fans run at a high speed. Select this option when using
the projector at altitudes approximately 2500 feet/760 meters or
higher.
Information Hide
On: Choose “On” to hide the info message.
Off: Choose “Off” to show the “searching” message.
Background Color
Use this feature to display a “Black”or “Blue” screen when no
signal is available.
Lamp/Filter Setings
Refer to next page.
Information
Refer to page 53.
OPTIONS
With the optional
dust lter installed,
“High” is selected
for “Fan Mode”.
Dust lter is Op-
tional and may not
be required in some
regions.
51
... English
User Controls
Advanced
Refer to page 54.
Reset
Choose “On” to return the display parameters on all menus to the
factory default settings.
52
English ...
User Controls
OPTIONS |
Lamp/Filter
Settings
Lamp Hours Used (Normal)
Display the projection time for normal mode.
Lamp Hours Used (ECO)
Display the projection time for ECO mode.
Lamp Life Reminder
Choose this function to show or to hide the warning message
when the changing lamp message is displayed.
The message will appear when the lamp has reached the end of its
life.
ECO Mode
Choose “On” to dim the projector lamp which will lower power
consumption and extend the lamp life. Choose “Off” to return to
normal mode.
Clear Lamp Hours
Reset the lamp hour counter after replacing the lamp.
Filter Usage Hours
Display the projection time for using lter.
Clear Filter Usage Hours
Reset the lter hour counter after replacing the lter.
Exit
Press to return to the previous menu.
53
... English
User Controls
OPTIONS |
Information
Information
To display the projector information for source, resolution, and
software version on the screen.
54
English ...
User Controls
OPTIONS |
Advanced
Standby Mode
Power-Saving: Choose “Power-Saving” to save power dissipa-
tion further < 0.5W.
Normal: Choose “Normal” to return to normal standby.
Direct Power On
Choose “On” to activate Direct Power mode. The projector will
automatically power on when AC power is supplied, without
pressing the buton on the projector control panel or the POWER
ON button on the remote control.
Auto Power Off (min)
Sets the countdown timer interval. The countdown timer will start,
when there is no signal being sent to the projector. The projector
will automatically power off when the countdown has nished (in
minutes).
Off Timer (min)
Sets the countdown timer interval. The countdown timer will start,
with or without a signal being sent to the projector. The projector
will automatically power off when the countdown has nished (in
minutes).
Control Panel Lock
When the keypad lock function is “On”, the control panel will
be locked however, the projector can be operated by the remote
control. By selecting “Off”, you will be able to reuse the control
panel. Press and hold the ENTER button on the projector cabinet
for about 10 seconds to turn off “Control Panel Lock”.
Power-Saving mode
will disable the fol-
lowing connectors,
buttons or functions
when the projector is
in standby:
- AUDIO OUT con-
nector
- LAN and Mail
Alert functions
- Buttons other than
POWER button on
the cabinet
- Buttons other than
POWER ON but-
ton on the remote
control
- PC Control con-
nector
- Virtual Remote
Tool, PC Control
Utility Pro 4
55
... English
Appendices
Problem: No image appears on screen
Ensure all the cables and power connections are correctly and
securely connected as described in the “Installation” section.
Ensure the pins of connectors are not crooked or broken.
Check if the projection lamp has been securely installed. Please
refer to the “Replacing the lamp” section.
Make sure the projector is switched on.
Ensure that the “AV-MUTE” feature is not turned on.
Problem: Partial, scrolling or incorrectly displayed image
Press “AUTO ADJ.” on the remote control or control panel.
If you are using a PC:
For Windows 95, 98, 2000, XP, Windows 7:
1. From the “My Computer” icon, open the “Control Panel” folder,
and double click the “Display” icon.
2. Select the “Settings” tab
3. Click on the “Advanced Properties”.
For Windows Vista:
1. From the “My Computer” icon, open the “Control Panel” folder,
and double click the “Appearance and Personalization”
2. Select “Personalization”
3. Click “Adjust screen resolution” to display “Display Settings”.
Click on the “Advanced Settings”.
If the projector is still not projecting the whole image, you will
also need to change the monitor display you are using. Refer to
the following steps.
Troubleshooting
If you experience trouble with the projector, refer to the fol-
lowing information. If the problem persists, please contact
your local dealer or service center.
56
English ...
Appendices
4. Verify the resolution setting is less than or equal to 1280 x 1024
resolution.
5. Select the “Change” under the “Monitor” tab .
6. Click on “Show all devices”. Next, select “Standard monitor
types” under the SP box; choose the resolution mode you need
under the “Models” box.
If you are using a Notebook:
1. First, follow the steps above to adjust resolution of the com-
puter.
2. Press the toggle output settings. example: [Fn]+[F4]
If you experience difculty changing resolutions or your monitor
freezes, restart all equipment including the projector.
Problem: The screen of the Notebook or PowerBook com-
puter is not displaying a presentation
If you are using a Notebook PC:
Some Notebook PCs may deactivate their own screens when a
second display device is in use. Each has a different way to be
reactivated. Refer to your computer’s documentation for detailed
information.
Problem: Image is unstable or ickering
Adjust the “Phase” to correct it. Refer to the “Setting” section for
more information.
Change the monitor color setting from your computer.
Compaq=> [Fn]+[F4]
Dell => [Fn]+[F8]
Gateway=> [Fn]+[F4]
IBM=> [Fn]+[F7]
Macintosh Apple:
System Preference-->Display-->Arrangement-->Mirror
display
Hewlett
=> [Fn]+[F4]
Packard
NEC=> [Fn]+[F3]
Toshiba => [Fn]+[F5]
57
... English
Appendices
Problem: Image has vertical ickering bar
Use “Clock” to make an adjustment.
Check and recongure the display mode of your graphic card to
make it compatible with the product.
Problem: Image is out of focus
Adjust the Focus Lever on the projector lens.
Make sure the projection screen is between the required distance
5” to 12”/130 to 314 mm [U300X/U250X] / 6” to 12”/148 to 311
mm [U310W/U260W] from the projector (refer to page 29).
Problem: The image is stretched when displaying 16:9 DVD
The projector automatically detects 16:9 DVD and adjusts the aspect
ratio by digitizing to full screen with 4:3 default setting.
If the image is still stretched, you will also need to adjust the aspect
ratio by referring to the following:
Please select 4:3 aspect ratio type on your DVD player if you are
playing a 16:9 DVD.
If you can’t select 4:3 aspect ratio type on your DVD player,
please select 4:3 aspect ratio in the on screen menu.
Problem: Image is reversed
Select “SETTING-->Orientation” from the OSD and adjust the
projection direction.
Problem: Lamp burns out or makes a popping sound
When the lamp reaches its end of life, it will burn out and may
make a loud popping sound. If this happens, the projector will
not turn on until the lamp module has been replaced. To replace
the lamp, follow the procedures in the “Replacing the Lamp”.
58
English ...
Appendices
Problem: LED lighting message
Power Indicator
Indicator Condition Projector Condition Note
Off The main power is off --
Blinking light Blue 0.5 sec On,
0.5 sec Off
The projector is getting ready to turn on. Wait for a moment.
2.5 sec On,
0.5 sec Off
Off Timer is enabled. --
Steady light Blue The projector is turned on. --
Orange “Normal” is selected for “Standby Mode” --
Red “Power-Saving” is selected for “Standby Mode” --
Status Indicator
Indicator Condition Projector Condition Note
Off Normal or Standby (“Power-Saving” for “Standby
Mode”)
--
Blinking light Red 1 cycle (0.5 sec
On, 2.5 sec Off)
Lamp cover error or lamp housing error Replace the lamp cover or lamp housing correctly.
2 cycle (0.5 sec
On, 0.5 sec Off)
Temperature error The projector is overheated. Move the projector to a
cooler location.
3 cycle (0.5 sec
On, 0.5 sec Off)
Power error Power unit is not working properly. Contact your dealer.
4 cycle (0.5 sec
On, 0.5 sec Off)
Fan error Fans will not work correctly.
6 cycle (0.5 sec
On, 0.5 sec Off)
Lamp error Lamp fails to light. Wait a full minute and then turn
on again.
Green Re-ring the lamp (The projector is cooling down) The projector is re-ring.
Wait for a moment.
Steady light Green Standby (“Normal” for “Standby Mode”) --
Orange CONTROL PANEL LOCK is on. You have pressed cabinet button when Control Panel
Lock is on.
Lamp Indicator
Indicator Condition Projector Condition Note
Off Normal --
Blinking light Red Lamp has reached its end of life. Lamp replace-
ment message will be displayed.
Replace the lamp.
Steady light Red Lamp has reached its end of life. The projector will
not turn on until the lamp is replaced.
Wait for a moment.
Green “ECO Mode” is set to “On” --
59
... English
Appendices
Problem: Message Reminders
Over temperature - the projector has exceeded its recommended
operating temperature and must be allowed to cool down before it
may be used.
Replacing the lamp - the lamp is about to reach its maximum life-
time. Prepare to replace it soon.
NOTE: When you continue to use the projector for another 100
hours after the lamp has reached the end of its life, the projector
cannot turn on.
If this happens, after replacing the lamp, connect the power cord
and then press the HELP button on the remote control. This will
allow you to turn on the projector. Clear the lamp hours by select-
ing “OPTIONS” -> “Lamp/Filter Settings” -> “Clear Lamp Usage
Hours” from the menu.
Fan failed - the system fan is not working.
Cleaning the lter
60
English ...
Appendices
Cleaning the Filter
The air-lter sponge keeps dust and dirt from getting inside
the projector and should be frequently cleaned. If the lter is
dirty or clogged, your projector may overheat.
The message for lter
cleaning will be dis-
played for one minute
when the projector is
turned on or off.
To cancel the message,
press any button on
the projector cabinet
or the remote control.
CAUTION:
Turn off the projector, and unplug the projector before replacing the lter.
Only clean the outside of the lter cover with a vacuum cleaner.
Do not attempt to operate the projector without the lter cover.
To replace the lter
CAUTION:
Before replacing the lter, remove dust and dirt from the projector cabinet.
The projector contains high-precision parts. Keep out dust and dirt during lter
replacement.
Do not wash the lter with water. Water will damage the lter membrane.
Reattach the lter cover correctly. Failure to do so may cause projector malfunc-
tion.
To clean the air-lter
Use a small vacuum cleaner
designed for computers and
other ofce equipment.
If the dirt is difcult to re-
move or the lter is broken,
please contact your local
dealer or service center to
obtain a new lter.
Replacing Procedure:
1. Disconnect the power cord.
2. Pull the lter out.
3. Replace the lter.
4. Install the new lter by reversing the
previous steps.
5 After replacing the lter, turn on the
power, and press the [MENU] button
-> OPTIONS |Lamp/Filter Settings ->
Clear Filter Usage Hours to reset the
lter usage hours. Refer to page 52.
61
... English
Appendices
Replacing the lamp
(optional lamp NP19LP(U250X/U260W)/NP20LP(U300X/
U310W))
The projector will detect the lamp life at 2500 hours (U250X/
U260W) /2500 hours (U300X/U310W) in Eco Mode Off. When
the “Power” LED indicator ashes red and the message below
displays on-screen, the projector has detected that the lamp is
approaching its end of life. (Refer to page 27) It will show you
a warning message
When you see this message, change the lamp as soon as pos-
sible. Make sure the projector has been cooled down for at
least 60 minutes before changing the lamp.
Warning: To avoid
burns, allow the projec-
tor to cool for at least
60 minutes before you
replace the lamp!
1
3
4
2
The lamp life in Eco
Mode On: up to
3000 hours (U300X/
U310W) and up to
4000 hours (U250X/
U260W).
62
English ...
Appendices
Warning: To reduce the
risk of personal injury,
do not drop the lamp
module or touch the
lamp bulb. The bulb
may shatter and cause
injury if it is dropped.
Lamp Replacing Procedure:
1. Switch off the power to the projector by pressing the POWER
OFF button on the remote control or the button on the
control panel.
2. Allow the projector to cool down at least 60 minutes.
3. Disconnect the power cord.
4. Use a screwdriver to remove the screw from the cover.
5. Push up and remove the cover.
6. Remove 3 screws from the lamp module and pull up the
handle.
7. Pull out the lamp module.
8. Install the new lamp module by reversing the previous steps.
Be sure to tighten the screws on the lamp module and the
lamp cover.
9. After replacing the lamp, turn on the power, and select the
[MENU] button -> OPTIONS |Lamp/Filter Settings -> Clear
Lamp Hours to reset the lamp usage hours. Refer to page 52.
Do not break the glass
on the lamp housing.
Keep nger prints off
the glass surface on the
lamp housing. Leaving
nger prints on the
glass surface might
cause an unwanted
shadow and poor
picture quality.
63
... English
Appendices
Cleaning procedure for the aspherical
mirror and lens
If the aspherical mirror or lens of projection lens is dusty or
blemished, please clean the mirror or lens as following proce-
dure:
1. Turn off the projector and cool projector down for a while.
2. Unplug the power cord from outlet.
3. Blow the dust by blower for cameras which you could buy from
camera shops.Wipe the mirror or lens gently using a cleaning
cloth.
CAUTION:
Do not wipe the mirror, if there is dust on it. Please blow the dust by
blower rst.
Always wipe the mirror or lens with a cleaning cloth.
Please do not wipe the mirror or lens hard because that may cause serious
damage on the surface of mirror or lens.
Wiping might scratch the mirror or lens. Optical performance of the projec-
tor will thus be impacted if mirror or lens is scratched after wiping. Optical
performance impact will be dependent on the scratch condition of them.
Do not use liquid cleaners or chemicals on the cloth because it may contam-
inate the cloth and cause serious damage on the surface of mirror or lens.
64
English ...
Appendices
Specications
Optical
U300X U250X U310W U260W
Projection System Single DLP® chip (0.55”, aspect ratio 4:3) Single DLP® chip (0.65”, aspect ratio
16:10)
Resolution
*1
1024 × 768 pixels (XGA) 1280 × 800 pixels (WXGA)
Lens Manual focus
F2.71
Lamp 280W AC
(245W in ECO
mode)
230W AC
(190W in ECO
mode)
280W AC
(245W in ECO
mode)
230W AC
(190W in ECO
mode)
Light Output
*2 *3
3000 lumens 2500 lumens 3100 lumens 2600 lumens
Approx. 80% in ECO mode
Contrast Ratio
*3
(full white:full black)
2000:1
Image Size (Diagonal) 63 to 85 inches/ 1.6 to 2.16 m 77 to 100 inches/ 1.96 to 2.54 m
Projection Distance
(mini. - max.)
19 to 26 inches / 475 to 662 mm 19 to 26 inches / 495 to 661 mm
Projection Angle 55.3°
*1 Effective pixels are more than 99.99%.
*2 This is the light output value (lumens) when [Picture Mode] is set to [High-Bright] in the menu. If any other
mode is selected as [Picture Mode], the light output value may drop slightly.
*3 Compliance with ISO21118-200
Electrical
U300X U250X U310W U260W
Inputs 2 x RGB/Component (D-Sub 15P), 1 x HDMI (19P) HDCP supported
*4
, 1 x S-Video
(DIN 4P), 1 x Video (RCA), 1 x (L/R) RCA Audio, 2 x Stereo Mini Audio
Outputs 1 x RGB (D-Sub 15P), 1 x Stereo Mini Audio
PC Control 1 x PC Control Port (D-Sub 9P)
Wired LAN Port 1 x RJ-45 (10/100 BASE-T)
Service Port 1 x mini USB (for service purpose only)
Color Reproduction 16.7 million colors simultaneously, Full color
Compatible Signals
*5
Analog: VGA/SVGA/XGA/XGA+/WXGA/Quad-VGA/WXGA+/SXGA/SXGA+/
WXGA+/WXGA++/UXGA
480i/480p/576i/576p/720p/1080i/1080p
HDMI: VGA/SVGA/XGA/WXGA/Quad-VGA/SXGA/SXGA+/WXGA+/
WXGA++/
480p/576p/720p/1080i/1080p
Video Bandwidth RGB: 80 MHz (Max.)
Horizontal Resolution 540 TV lines: NTSC/NTSC4.43/PAL/PAL-M/PAL-N/PAL60
300 TV lines: SECAM
Scan Rate Horizontal: 31.35 kHz to 91.1 kHz
Vertical: 56 Hz to 120 Hz (HDMI: 50 to 85 Hz)
65
... English
Appendices
Sync Compatibility Separate Sync
Built-in Speaker 10W (monaural)
Power Requirement 100 – 240V AC, 50/60 Hz
Input Current 100 – 240V AC,
50-60Hz, 3.5-1.5A
100 – 240V AC,
50-60Hz, 3.0-1.3A
100 – 240V AC,
50-60Hz, 3.5-1.5A
100 – 240V AC,
50-60Hz, 3.0-1.3A
Power Consumption
ECO Mode On 315W+/-10%
@110Vac
245W+/-10%
@110Vac
315W+/-10%
@110Vac
245W+/-10%
@110Vac
ECO Mode Off 360W+/-10%
@110Vac
300W+/-10%
@110Vac
360W+/-10%
@110Vac
300W+/-10%
@110Vac
Standby (Normal) 3 W
Standby (Power-
saving)
0.5 W
*4 HDMI
®
(Deep Color, Lip Sync) with HDCP
What is HDCP/HDCP technology?
HDCP is an acronym for High-bandwidth Digital Content Protection. High bandwidth Digital Content Protec-
tion (HDCP) is a system for preventing illegal copying of video data sent over a Digital Visual Interface (DVI).
If you are unable to view material via the HDMI input, this does not necessarily mean the projector is not
functioning properly. With the implementation of HDCP, there may be cases in which certain content is pro-
tected with HDCP and might not be displayed due to the decision/intention of the HDCP community (Digital
Content Protection, LLC).
*5 An image with higher or lower resolution than the projector’s native resolution (U300X/U250X: 1024 × 768
and U310W/U260W: 1280 × 800) will be displayed with scaling technology.
Mechanical
U300X U250X U310W U260W
Installation Orientation Desktop/Front, Desktop/Rear, Ceiling/Front, Ceiling/Rear
Dimensions 12.9” (W) × 5.5” (H) × 15.5” (D) /327 mm (W) × 138 mm (H) × 393 mm (D)
(not including protrusions)
16.8” (W) × 7.9” (H) × 16.0” (D) /427 mm (W) × 200 mm (H) × 406 mm (D)
(with cable cover and tilt adjusting wheel)
Weight 14.3 lbs/6.5 kg
Environmental Consid-
erations
Operational Temperatures : 41° to 104°F (5° to 40°C),
(ECO mode selected automatically at 95°F to 104°F/35°C to 40°C)
20% to 80% humidity (non-condensing)
Storage Temperatures : 14° to 122°F (-10° to 50°C),
20% to 80% humidity (non-condensing)
Regulations UL/C-UL Approved (UL 60950-1, CSA 60950-1)
Meets DOC Canada Class B requirements
Meets FCC Class B requirements
Meets AS/NZS CISPR.22 Class B
Meets EMC Directive (EN55022, EN55024, EN61000-3-2, EN61000-3-3)
Meets Low Voltage Directive (EN60950-1, TÜV GS Approved)
Electrical
U300X U250X U310W U260W
66
English ...
Appendices
Compatibility Modes
Signal Resolution (dots)
Aspect
Ratio
Refresh Rate
(Hz)
VGA 640x480 4:3 60/72/75/85
SVGA 800x600 4:3 56/60/72/75/85
XGA 1024x768
(*1)
4:3 60/70/75/85
XGA+ 1152x864 4:3 60/75/85
WXGA
1280x768
(*2)
15:9 60
1280x800
(*2)
16:10 60
1360x768
(*3)
16:9 60
Quad-VGA 1280x960 4:3 60
SXGA 1280x1024 5:4 60
SXGA+ 1400x1050 4:3 60
WXGA+ 1440x900 16:10 60
WXGA++ 1600x900
(*3)
16:9 60
UXGA 1600x1200 4:3 60
HD 1280x720 16:9 60
MAC 13” 640x480 4:3 67
MAC 16” 832x624 4:3 75
MAC 19” 1024x768 4:3 75
MAC 21” 1152x870 4:3 75
Analog RGB
Signal Resolution (dots)
Aspect
Ratio
Refresh Rate
(Hz)
VGA 640x480 4:3 60
SVGA 800x600 4:3 60
XGA 1024x768
(*1)
4:3 60
WXGA
1280x768
(*2)
15:9 60
1280x800
(*2)
16:10 60
1360x768
(*3)
16:9 60
Quad-VGA 1280x960 4:3 60
SXGA 1280x1024 5:4 60
SXGA+ 1400x1050 4:3 60
WXGA+ 1440x900 16:10 60
WXGA++ 1600x900
(*3)
16:9 60
HDTV 1920x1080 16:9 50/60
HDTV(1080i) 1920x1080 16:9 50/60
HDTV(720p) 1280x720 16:9 50/60
SDTV(480p) 720x480 4:3/16:9 60
SDTV(576p) 720x576 4:3/16:9 50
HDMI
(*1)Native resolu-
tion on XGA model
(U300X/U250X).
(*2)Native resolu-
tion on WXGA
model (U310W/
U260W).
(*3) The projector
may fail to display
these signals
correctly when
[AUTO] is selected
for [Aspect Ratio]
in the on-screen
menu. The factory
default is [AUTO]
for [Aspect Ratio].
To display these
signals, select
[16:9] for [Aspect
Ratio].
67
... English
Appendices
Note: “*” for analog
signal only.
Signal Aspect Ratio
Refresh Rate
(Hz)
NTSC 4:3 60
PAL 4:3 50
PAL60 4:3 60
SECAM 4:3 50
Composite Video / S-Video
Signal Resolution (dots)
Aspect
Ratio
Refresh Rate
(Hz)
HDTV(1080p) 1920x1080 16:9 60
HDTV(1080i) 1920x1080 16:9 50/60
HDTV(720p) 1280x720 16:9 50/60
SDTV(480p) 720x480 4:3/16:9 60
SDTV(576p) 720x576 4:3/16:9 50
SDTV(480i) 720x480 4:3/16:9 60
SDTV(576i) 720x576 4:3/16:9 50
Component
TIP:
An image with higher or lower resolution than the projector’s native
resolution (U300X/U250X: 1024 x 768 / U310W/U260W: 1280 x 800) will be
displayed with scaling technology.
Sync on Green and Composite sync signals are not supported.
Signals other than those specied in the table above may not be displayed
correctly. If this should happen, change the refresh rate or resolution on
your PC. Refer to Display Properties help section of your PC for proce-
dures.
68
English ...
Appendices
Please note that dam-
age resulting from
incorrect installation
will invalidate the war-
ranty.
Ceiling Mount Installation
1. To prevent damaging your projector, please use the ceil-
ing mount package for installation.
2. If you buy a ceiling mount from another company, please
ensure the screws used to attached a mount to the projec-
tor met the following specications:
Screw type: M4
Maximum screw length: 8mm
Minimum screw length: 6mm
Warning:
1. If you buy a ceiling
mount from another
company, please
ensure that there is at
least 10cm distance
between the bottom
cover of the projector
and the ceiling.
2. Avoid placing
the projector near
sources of heat such
air-conditioning
units and heaters
otherwise it may
overheat and shut
down automatically.
3. Ceiling mounts
should be attached
to metal, concrete or
wood.
Unit: mm
69
... English
Appendices
Cabinet Dimensions
Ventilation
Ventilation
Focus Level
Lens Center
200.00
388.00
255.50
217.00
405.76
427.00
326.80
66.38 124.84
75.3538.87
200.00
10.00
21.2889.44
133.78 108.94
148.48
-A-
Unit: mm
70
English ...
Appendices
Pin Assignments of D-Sub COMPUTER Input
Connector
Mini D-Sub 15 Pin Connector
1 2 3 4 5
11 12 13 14 15
6 7 8 9 10
Signal Level
Video signal : 0.7Vp-p (Analog)
Sync signal : TTL level
COMPUTER 1 IN
NOTE: Pin Nos. 12 and 15 are required for DDC/CI.
Pin No. RGB Signal (Analog) YCbCr Signal
1 Red Cr
2 Green Y
3 Blue Cb
4 Ground
5 Ground
6 Red Ground Cr Ground
7 Green Gro Y Ground
8 Blue Ground Cb Ground
9 No Connection
10 Sync Signal Ground
11 No Connection
12 Bi-directional DATA (SDA)
13
Horizontal Sync or Composite
Sync
14 Vertical Sync
15 Data Clock
71
... English
Appendices
PC Control Codes and Cable Connection
PC Control Codes
Function Code Data
POWER ON 02H 00H 00H 00H 00H 02H
POWER OFF 02H 01H 00H 00H 00H 03H
INPUT SELECT COMPUTER 1 02H 03H 00H 00H 02H 01H 01H 09H
INPUT SELECT COMPUTER 2 02H 03H 00H 00H 02H 01H 02H 0AH
INPUT SELECT HDMI 02H 03H 00H 00H 02H 01H 1AH 22H
INPUT SELECT VIDEO 02H 03H 00H 00H 02H 01H 06H 0EH
INPUT SELECT S-VIDEO 02H 03H 00H 00H 02H 01H 0BH 13H
PICTURE MUTE ON 02H 10H 00H 00H 00H 12H
PICTURE MUTE OFF 02H 11H 00H 00H 00H 13H
SOUND MUTE ON 02H 12H 00H 00H 00H 14H
SOUND MUTE OFF 02H 13H 00H 00H 00H 15H
NOTE: Contact your local dealer for a full list of the PC Control Codes if needed.
Cable Connection
Communication Protocol
Baud rate ....................................................38400 bps
Data length .................................................8 bits
Parity ...........................................................No parity
Stop bit ........................................................One bit
X on/off ........................................................None
Communications procedure ....................Full duplex
PC Control Connector (D-SUB 9P)
3 4 521
9876
NOTE 1: Pins 1, 4, 6 and 9 are no used.
NOTE 2: Jumper “Request to Send” and “Clear to Send” together on both ends of the cable to simplify cable connection.
To TxD of PC
To RxD of PC
To GND of PC
To RTS of PC
To CTS of PC
Power
No power (POWER indicator does not light blue).
Power cable’s plug is fully inserted into the wall outlet.
Lamp cover is installed correctly.
Lamp Hours Used (lamp operation hours) was cleared after
lamp replacement.
No power even though you press and hold the POWER
button for a minimum of 1 second.
Shut down during operation.
Power cable’s plug is fully inserted into the wall outlet.
Lamp cover is installed correctly .
Power Management is turned off (only models with the
Power Management function).
Video and Audio
No image is displayed from your PC or video equipment to the
projector.
Still no image even though you connect the projector to the
PC rst, then start the PC.
Enabling your notebook PC’s signal output to the projector.
A combination of function keys will enable/disable the
external display. Usually, the combination of the “Fn” key
along with one of the 12 function keys turns the external
display on or off.
No image (blue background).
Still no image even though you press the AUTO ADJUST
button.
Still no image even though you carry out [RESET] in the
projector’s menu.
Signal cable’s plug is fully inserted into the input connector
A message appears on the screen.
( _____________________________________________ )
The source connected to the projector is active and avail-
able.
Still no image even though you adjust the brightness and/or
the contrast.
Input source’s resolution and frequency are supported by
the projector.
Image is too dark.
Remains unchanged even though you adjust the brightness
and/or the contrast.
Image is distorted.
Image appears to be trapezoidal (unchanged even though
you carry out the [KEYSTONE] adjustment).
Parts of the image are lost.
Still unchanged even though you press the AUTO ADJUST
button.
Still unchanged even though you carry out [RESET] in the
projector’s menu.
Image is shifted in the vertical or horizontal direction.
Horizontal and vertical positions are correctly adjusted on a
computer signal.
Input source’s resolution and frequency are supported by
the projector.
Some pixels are lost.
Image is ickering.
Still unchanged even though you press the AUTO ADJUST
button.
Still unchanged even though you carry out [RESET] in the
projector’s menu.
Image shows ickering or color drift on a computer signal.
Image appears blurry or out of focus.
Still unchanged even though you checked the signal’s reso-
lution on PC and changed it to projector’s native resolution.
The throw distance is within 5” to 12” (130 to 314 mm) on
U300X/U250X and 6” to 12” (148 to 311 mm) on U310W/
U260W.
Still unchanged even though you adjusted the focus.
No sound.
Audio cable is correctly connected to the audio input of the
projector.
Still unchanged even though you adjusted the volume level.
Other
Remote control does not work.
No obstacles between the sensor of the projector and the
remote control.
Projector is placed near a uorescent light that can disturb
the infrared remote controls.
Batteries are new and are not reversed in installation
Buttons on the projector cabinet do not work.
[CONTROL PANEL LOCK] is not turned on in the menu.
Still unchanged even though you press and hold the EXIT
button for minimum of 10 seconds.
Troubleshooting Check List
Before contacting your dealer or service personnel, check the following list to be sure repairs are needed also by
referring to the “Troubleshooting” section in your user’s manual. This checklist below will help us solve your
problem more efciently.
* Print the following pages.
Frequency of occurrence always sometimes (How often?_______________________) other (__________________)
In the space below please describe your problem in detail.
Information on application and environment where your projector is used
Projector
Model number:
Serial No.:
Date of purchase:
Lamp operating time (hours):
Lamp Mode: Normal Eco
Information on input signal:
Horizontal synch frequency [ ] kHz
Vertical synch frequency [ ] Hz
Synch polarity H (+) (–)
V (+) (–)
Synch type Separate Composite
Sync on Green
STATUS Indicator:
Steady light Orange Blue
Flashing light [ ] cycles
Remote control model number:
Installation environment
Screen size: inch
Screen type: White matte Beads Polarization
Wide angle High contrast
Throw distance: feet/inch/m
Orientation: Ceiling mount Desktop
Power outlet connection:
Connected directly to wall outlet
Connected to power cord extender or other (the number
of connected equipment______________)
Connected to a power cord reel or other (the number of
connected equipment______________)
Computer
Manufacturer:
Model number:
Notebook PC / Desktop
Native resolution:
Refresh rate:
Video adapter:
Other:
Video equipment
VCR, DVD player, Video camera, Video game or other
Manufacturer:
Model number:
Signal cable
NEC standard or other manufacturer’s cable?
Model number: Length: inch/m
Distribution amplier
Model number:
Switcher
Model number:
Adapter
Model number:
Projector
PC
DVD Player
TCO Certication
Some models in this product family are TCO certied. All TCO certied models have the TCO mark on the mark-
ing plate (on the bottom of the product). To see a list of our TCO certied projectors and their TCO Certication (in
English only), visit our website at http://www.nec-display.com/ap/en_projector/tco/index.html
The TCO certication, designed by TCO Development, is an international environmental and ergonomics standard
for IT equipment.
In some cases we may post a list of TCO certied models on our website before the TCO mark is placed on the prod-
uct. This difference in timing is related to the date certication is received compared with the projectors manufactur-
ing date.
© NEC Display Solutions, Ltd. 2010-2011 7N951535
74

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Nec NP-U310W wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Nec NP-U310W

Nec NP-U310W Bedienungsanleitung - Deutsch - 82 seiten

Nec NP-U310W Bedienungsanleitung - Französisch - 82 seiten

Nec NP-U310W Bedienungsanleitung - Italienisch - 82 seiten

Nec NP-U310W Bedienungsanleitung - Portugiesisch - 82 seiten

Nec NP-U310W Bedienungsanleitung - Spanisch - 82 seiten

Nec NP-U310W Bedienungsanleitung - Polnisch - 82 seiten

Nec NP-U310W Bedienungsanleitung - Türkisch - 82 seiten

Nec NP-U310W Bedienungsanleitung - Schwedisch - 82 seiten

Nec NP-U310W Kurzanleitung - Alle Sprachen - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info