Bedienungsanleitung Nec NP-V260W (Seite 59 von 107) (Englisch)

493615

Zoom out

Zoom in

Vorherige Seite

1/107

Nächste Seite

4. Convenient Features

8. Press the  button to select a compatible eyeglass method and press the ENTER button.

(→ page 75)

Set other 3D-related menu options such as [FORMAT] and [L/R INVERT] as necessary.

9. Press the MENU button once.

The menu will disappear.

Selecting input connected to a source of 3D images [COMPUTER / VIDEO / S-VIDEO] (V230X/V260/V230)/

[COMPUTER 1/COMPUTER 2/HDMI/VIDEO/S-VIDEO (V300X/V260X/V300W/V260W)

This function switches the 3D mode between ON and OFF for each input.

NOTE:

To conﬁrm that the supported 3D signal is accepted, use either way of the following:

- Make sure that [3D] is displayed in the top right of the screen after the source is selected.

- Display [INFO.] → [SOURCE] → [3D SIGNAL] and make sure that "SUPPORTED" is displayed.

Using NVIDIA

3D Vision™ (V300X/V300W only)

1. Setting a computer

(1) Prepare and set devices required for NVIDIA

3D Vision™.

For more information, visit NVIDIA

website.

http://www.nvidia.com/object/3D_Vision_Requirements.html

(2) From the website of NVIDIA

, download the updated driver of an appropriate graphics board for the projector,

and install it to your computer.

To view 3D images, see page 48.

Select [COMPUTER 1], [COMPUTER 2], or [HDMI].

NOTE:

• The maximum distance for viewing 3D images is 15 m/590 inches from the lens surface under the following restrictions:

- Brightness on the projector: 2000 lumens or greater

- Screen gain: 1

- Viewing position: Facing straight towards the screen center

- Outside light: None

- LCD shutter eyeglasses: Using the optional 3D Goggles (NP01GL)

• If 3D content is played back on your computer and the performance is poor it may be caused by the CPU or graphics chip. In this

case you may have difﬁculty seeing the 3D images as they were intended. Check to see if your computer meets the requirements

provided in your user's manual included with your 3D content.

• The DLP

Link compatible LCD shutter eyeglasses allow you to view 3D images by receiving synch signals, which are included

in left eye and right eye images, reﬂected from the screen. Depending on environments or conditions such as the ambient bright-

ness, screen size or viewing distance, the LCD shutter eyeglasses may fail to receive synch signals, causing poor 3D images.

• When the 3D mode is enabled, the Keystone correction range will be narrower.

• When the 3D mode is enabled, the following settings are invalid.

[WALL COLOR], [PRESET], [REFERENCE], [COLOR TEMPERATURE]

• Refer to the [SOURCE] screen under the [INFO.] menu for information on whether the input signal is 3D compatible.

• Signals other than those listed in "Compatible Input Signal List" on page 93 will be out of range or will be displayed in 2D.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec NP-V260W Seite 59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nec NP-V260W

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info