Bedienungsanleitung Nec np3250 (Seite 28 von 183) (Englisch)

216195

Zoom out

Zoom in

Vorherige Seite

1/183

Nächste Seite

WIRELESS

USB(LAN)

WIRELESS

COMPUTER 1 IN

COMPUTER 2 IN

PHONE

2. Installation and Connections



Making Connections

Connecting Your PC or Macintosh Computer

NOTE: When using with a notebook PC, be sure to connect the projector and notebook PC while the projector is in standby mode

and before turning on the power to the notebook PC.

In most cases the output signal from the notebook PC is not turned on unless connected to the projector before being powered up.

* If the screen goes blank while using your remote control, it may be the result of the computer’s screen-saver or power manage-

ment software.

Enabling the computer’s external display

Displaying an image on the notebook PC’s screen does not necessarily mean it outputs a signal to the projector.

When using a PC compatible laptop, a combination of function keys will enable/disable the external display.

Usually, the combination of the “Fn” key along with one of the 12 function keys gets the external display to come on

or off. For example, NEC laptops use Fn + F3, while Dell laptops use Fn + F8 key combinations to toggle through

external display selections.

IBM VGA or Compatibles (Notebook

type) or Macintosh (Notebook type)

NOTE: The NP3250/NP2250/NP1250/NP3250W is not compatible with video decoded outputs of either the NEC ISS-6020 and

ISS-6010 switchers.

NOTE:

An image may not be displayed correctly when a Video or S-Video source is played back via a commercially available scan converter.

This is because the projector will process a video signal as a computer signal at the default setting. In that case, do the following.

* When an image is displayed with the lower and upper black portion of the screen or a dark image is not displayed correctly:

Project an image to ﬁll the screen and then press the AUTO ADJ button on the remote control or the AUTO ADJUST button on

the projector cabinet.

NOTE: For older Macintosh, use a commercially

available pin adapter (not supplied) to connect to

your Mac’s video port.

• First turn off the computer and the projector before making connections.

• Turn down the volume on the computer before connecting an audio cable to the headphone jack of the com-

puter. After connecting the computer to the projector, you can adjust the sound level on the computer and the

projector to your preference.

• You are recommended to connect an audio cable to an audio out connector (mini jack type) if any.

Audio cable (not supplied)

VGA signal cable (supplied)

To mini D-Sub 15-pin connector on the

projector. It is recommended that you use

a commercially available distribution am-

pliﬁer if connecting a signal cable longer

than the one supplied.

Audio

cable (not

supplied)

BNC × 5 cable (not supplied)

NOTE: Both COMPUTER 1 IN and

COMPUTER 3 (DVI-D) IN connectors

support Plug & Play (DDC2B).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec np3250 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nec np3250

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info