Bedienungsanleitung Nec NP60G (Seite 5 von 74) (Englisch)

654057

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

iii

Important Information

Fire and Shock Precautions

• Ensure that there is suf cient ventilation and that vents are unobstructed to prevent the build-up of heat inside

your projector. Allow at least 4 inches (10cm) of space between your projector and a wall.

• Do not try to touch the ventilation outlet on the right front (when seen from the front) as it can become heated

while the projector is turned on and immediately after the projector is turned off.

• Prevent foreign objects such as paper clips and bits of paper from falling into your projector. Do not attempt to

retrieve any objects that might fall into your projector. Do not insert any metal objects such as a wire or screw-

driver into your projector. If something should fall into your projector, disconnect it immediately and have the

object removed by a quali ed service personnel.

• Do not place any objects on top of the projector.

• Do not touch the power plug during a thunderstorm. Doing so can cause electrical shock or  re.

• The projector is designed to operate on a power supply of 100-240V AC 50/60 Hz (NP60/NP50/NP40) or

200-240V AC 50/60 Hz (NP60G/NP50G/NP40G). Ensure that your power supply  ts this requirement before at-

tempting to use your projector.

• Do not look into the lens while the projector is on. Serious damage to your eyes could result.

• Keep any items such as magnifying glass out of the light path of the projector. The light being projected from

the lens is extensive, therefore any kind of abnormal objects that can redirect light coming out of the lens, can

cause unpredictable outcome such as  re or injury to the eyes.

• Do not cover the lens with the black lens cap or equivalent while the projector is on. Doing so can lead to melt-

ing of the cap and possibly burning your hands due to the heat emitted from the light output.

• Do not place any objects, which are easily affected by heat, in front of the projector lens or a projector exhaust

vent.

Doing so could lead to the object melting or getting your hands burned from the heat that is emitted from the

light output and exhaust.

• Handle the power cable carefully. A damaged or frayed power cable can cause electric shock or  re.

- Do not use any power cables than the supplied one.

- Do not bend or tug the power cable excessively.

- Do not place the power cable under the projector, or any heavy object.

- Do not cover the power cable with other soft materials such as rugs.

- Do not heat the power cable.

- Do not handle the power plug with wet hands.

• Turn off the projector, unplug the power cable and have the projector serviced by a quali ed service personnel

under the following conditions:

- When the power cable or plug is damaged or frayed.

- If liquid has been spilled into the projector, or if it has been exposed to rain or water.

- If the projector does not operate normally when you follow the instructions described in this user's manual.

- If the projector has been dropped or the cabinet has been damaged.

- If the projector exhibits a distinct change in performance, indicating a need for service.

• Disconnect the power cable and any other cables before carrying the projector.

• Turn off the projector and unplug the power cable before cleaning the cabinet or replacing the lamp.

• Turn off the projector and unplug the power cable if the projector is not to be used for an extended period of

time.

CAUTION

• Do not use the tilt-foot for purposes other than originally intended. Misuses such as using the tilt foot to carry

or hang (from the wall or ceiling) the projector can cause damage to the projector.

• Do not send the projector in the soft case by parcel delivery service or cargo shipment. The projector inside

the soft case could be damaged.

• Select [High] in Fan mode if you continue to use the projector for consecutive days. (From the menu, select

[Setup - Options] → [Fan Mode] → [High].)

• Do not turn off the AC power for 60 seconds after the lamp is turned on and while the POWER indicator is

blinking green.

Doing so could cause premature lamp failure.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec NP60G Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nec NP60G

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info