Bedienungsanleitung Nec vt 46 (Seite 8 von 37) (Englisch)

214394

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

E-8

1. RGB IN / Component Input Connector (Mini D-Sub 15 Pin)

Connect your computer or other analog RGB equipment such as IBM

compatible or Macintosh computers. Use the supplied RGB cable to

connect to your computer. This also serves as a component input

connector that allows you to connect a component video output of

component equipment such as a DVD player. This connector also

supports SCART output signal. See page E-12 for more details.

2. RGB AUDIO Input Mini Jack (Stereo Mini)

This is where you connect the audio output from your computer or

DVD player when connected to the RGB input. A commercially avail-

able audio cable is required.

3. S-VIDEO IN Connector (Mini DIN 4 Pin)

Here is where you connect the S-Video input from an external source

like a VCR.

NOTE: S-Video provides more vivid color and higher resolution than the tra-

ditional composite video format.

S-VIDEO AUDIO Input Jacks R/L (RCA)

These are your left and right channel audio inputs for stereo sound

from an S-Video source.

4. VIDEO IN Connector (RCA)

Connect a VCR, DVD player, laser disc player, or document camera

here to project video.

VIDEO AUDIO Input Jacks R/L (RCA)

These are your left and right channel audio inputs for stereo sound

from a Video source.

5. PC CONTROL Port (DIN 8 Pin)

Use this port to connect your PC to control your projector. This en-

ables you to use your PC and serial communication protocol to con-

trol the projector. If you are writing your own program, typical PC

control codes are on page E-32.

Te r minal Panel Features

12 5

Part Names of the Remote Control

1. Infrared Transmitter

Direct the remote control toward the remote sensor on the projector

cabinet.

2. MENU Button

Displays the menu for various settings and adjustments.

3. SELECT GHFE / Volume Buttons

GH : Use these buttons to select the menu of the item you wish

to adjust.

FE : Use these buttons to change the level of a selected menu

item. A press of the E button executes the selection. When

no menus appear, these buttons work as a volume control.

4. ENTER Button

Executes your menu selection and activates items selected from the

menu.

5. CANCEL Button

Pressing this button will return to the previous menu.

While you are in the main menu, pressing this button will close the

menu.

6. POWER Button (ON/STAND BY) (

)

Use this button to turn the power on and off when the main power is

supplied and the projector is in standby mode.

To turn on the projector, press and hold this button for a minimum of

two seconds. To turn off the projector, press this button twice.

7. SOURCE Button

Press this button to select a video source such as a PC, VCR or DVD

player. Each time this button is pressed, the input source will change

as follows:

RGB → Video → S-Video → RGB → ...

8. ASPECT Button

Press this button to display the Aspect Ratio select screen. See page

E-22.

9. MUTE Button

This button turns off the image and sound for a short period of time.

Press again to restore the image and sound.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec vt 46 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info