Bedienungsanleitung Nec VT45 (Seite 33 von 54) (Englisch)

488898

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

E–25

3.OPERATION

This section describes how to select a computer or video source,

how to adjust the picture, and how to customize the menu or projec-

tor settings.

General Controls

Before you turn on your projector, ensure that the computer or video

source is turned on and that your lens cap is removed.

1. Turn on the Projector

Plug the supplied power cable in the wall outlet and then press the

main power switch. The projector will go into its standby mode and

the power indicator will glow orange.

Only after you press the “POWER” button on the projector cabinet

or the remote control will the power indicator turn to green and the

projector become ready to use.

Indicator status when the projector is turned on:

CAUTION

Avoid displaying stationary images for a prolonged period

of time.

Doing so can result in these images being temporarily sus-

tained on the surface of the LCD panel.

If this should happen, continue to use your projector. The

static background from previous images will disappear.

The STATUS indiator’ light depends on the lamp mode.

NOTE: To turn the projector on by pressing the main power switch,

use the menu and enable the “Auto Start” feature. (See page E-36.)

NOTE: Immediately after turning on the projector, screen flicker

may occur. This is not a fault. Wait for 3 to 5 minutes until the lamp

lighting is stabilized.

2. Select the Computer or Video Source

Press the Source button on the remote control or the projector cabi-

net to select “Video” (VCR, document camera, or laser disc player),

“S-Video” or “RGB” (computer or DVD with component output) to

display the image.

Or press the “Menu” button on the remote control or the cabinet and

use the menu to select your video source: “Video”, “S-Video” or

“RGB”.

3. Adjust the Lens Shift, the Image Size and the Focus

Use the Lens Shift lever to adjust the image position.

Use the Zoom lever to adjust the image size, then use the Focus ring

to obtain the best focus.

Use the “Magnify” button (+) or (-) on the remote control to make

the image larger up to 400%.

4. Turning off the Projector

First press the “POWER” button on the projector cabinet or the re-

mote control for a minimum of two seconds. The power indicator

will glow orange. After the projector turns off, the cooling fans keep

operating for 60 seconds.

Do not disconnect the power cable during this time. Then, press the

main power switch and unplug the power cable. The power indica-

tor will go out.

Indicator status when the projector is turned off:

POWER ON

STAND BY

POWER

STATUS

POWER

Standby

Steady orange light

Flashing green

light for one minute Steady green light

IMPORTANT:

• The projector should be unplugged if it will not to be used for an

extended period.

• To turn off the image and sound briefly (five minutes or less), use

the “Mute” button instead of turning the projector off and on.

• The projector will display a black, blue image or logo if no input

signal is present.

• Do not turn the projector off and then immediately back on. The

projector needs to cool for 60 seconds before it can be restarted.

POWER OFF

STAND BY

POWER

STATUS

POWER

STATUS

Press

for a

minimum of

2 s

econds

Cooling fan running

Flashing green light

Steady orange light

Standby(cooling fan

has stopped running)

CAUTION

Do not turn off the main power or unplug the power cable

from the wall outlet under any one of the following circum-

stances. Doing so can cause damage to the projector:

• Immediately after the power cable is plugged into the wall

outlet (when the POWER indicator has not changed to a

steady orange glow).

• Immediately after the cooling fan stops working (The cool-

ing fan continues to work for 60 seconds after the pro-

jector is turned off with the POWER button).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec VT45 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info