Bedienungsanleitung Nec VT45 (Seite 41 von 54) (Englisch)

488898

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

E–33

Position/Clock

Horizontal

Vertical

Clock

Phase

100

800

This allows you to manually adjust the image horizontally

and vertically, and adjust Clock and Phase.

Adjusts the image location horizontally and vertically using

the

and buttons.

This adjustment is made automatically when the Auto Ad-

just is turned on.

<Clock>

Use this item with the “Auto Adjust off” to fine tune the

computer image or to remove any vertical banding that might

appear. This function adjusts the clock frequencies that elimi-

nate the horizontal banding in the image. Press the

and

buttons until the banding disappears. This adjustment may

be necessary when you connect your computer for the first

time. This adjustment is made automatically when the Auto

Adjust is turned on.

<Phase>

Use this item to adjust the clock phase or to reduce video

noise, dot interference or cross talk. (This is evident when

part of your image appears to be shimmering.) Use the

and buttons to adjust the image.

Use “Phase” only after the “Clock” is complete.

This adjustment is made automatically when the Auto Ad-

just is turned on.

See “Auto Adjust (RGB Only)” on page E-36 for turning on

or off the Auto Adjust feature.

Resolution (when Auto Adjust is off):

Resolution

Auto Native

Factry Default

All Data

Current Signal

Video Filter (when Auto Adjust is off):Position/ Clock (when Auto Adjust is off):

This allows you to activate or deactivate the Advanced

AccuBlend feature.

Auto: Turns on the Advanced AccuBlend feature.

The projector automatically reduces or en-

larges the current image to fit the full screen.

Native: Turns off the Advanced AccuBlend feature.

The projector displays the current image in

its true resolution.

See “Auto Adjust (RGB Only)” on page E-

36 for turning on or off the Auto Adjust fea-

ture.

NOTE: When an image with a resolution of SVGA, XGA or

SXGA is displayed, the Resolution is not available.

NOTE: Once the Resolution setting has been changed, the

“Aspect” setting is automatically changed to “Normal”.

Changes all adjustments and settings to the factory preset.

Reset all the adjustments and settings for all the signals to

the factory preset.

The items can be reset except Language, Communication

Speed, Lamp Remaining Time, Lamp Hour Meter, Filter

Usage, and Projector Usage. To reset the lamp usage time,

see “Clear Lamp Hour Meter” and “Clear Filter Usage” page

E-37.

Video Filter

Off Less

This function reduces video noise.

Off: The low-pass filter is not applied.

Less: The low-pass filter is applied weakly.

More: The low-pass filter is applied strongly.

Screen adjustments are possible even when the filter is on.

Factory Default

Resets the adjustments for the current signal to the factory

preset levels.

The items that can be reset are: Brightness, Contrast, Color,

Hue, Sharpness, Volume, Aspect, Horizontal Position, Ver-

tical Position, Clock, Phase, Resolution, Video Filter, Gamma

Correction, Color Correction, and White Balance.

All Data Reset

Are you sure ?

Yes

Current Signal Reset

Are you sure ?

Yes

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec VT45 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info