Bedienungsanleitung Nec wt 600 (Seite 51 von 71) (Englisch)

214297

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

6-18

Selecting Aspect Ratio and Position for Screen [Screen]

Screen Type:

Select either 4:3 Screen or 16:9 Screen for the screen to be

used.

See also "Aspect Ratio" on page 6-8.

NOTE: When "Resolution" is set to "Native", this selection is inactive.

Position:

This feature adjusts the vertical position of the image when

viewing video with an aspect ratio selected.

When some aspect ratios are selected in Image Options, the

image is displayed with black borders on the top and bottom.

You can adjust the vertical position between top and bottom.

NOTE: This option is not available when "4:3" is selected in Screen

Type and "Letterbox" is selected in Aspect Ratio.

NOTE: During 3D Reform adjustment, "Screen Type" and "Screen

Position" may not be available. To make available, first reset the 3D

Reform data and then do settings again. Secondly repeat the 3D Re-

form adjustment. Changing "Screen Type" and "Screen Position" can

limit 3D Reform in its adjustable range.

Setting LAN Mode

This feature allows you to set various setting items when the

projector is used on your network.

Consult with your network administrator about these settings.

NOTE: A LAN card is required for LAN connection; NEC's optional

wireless LAN card is available. For more information on inserting or

ejecting a LAN card, see page 5-1.

CAUTION: Make sure that the LAN card is removed during

Standby mode (NOT Idle mode) or with the main power off.

Failure to do so may cause damage to your LAN card.

IP Address

An IP address can be automatically assigned to this projector

by your DHCP server. If your network does not automatically

assign IP address, ask your network administrator for an ad-

dress, and then register it manually.

Automatic ................ Automatically assigns an IP address to

the projector from a DHCP server.

Manual .................... Provides a space for you to register the

IP address or subnet mask number ob-

tained from your network administrator.

IP Address ............... Set your IP address. Press to display

the software keyboard and type in 12

numeric characters.

Subnet Mask ........... Set your subnet mask number. Press

to display the software keyboard and

type in 12 numeric characters.

Projector Name ....... Specify a unique projector name. Press

to display the software keyboard and

type in. Up to 16 alphanumeric charac-

ters can be used.

Gateway .................. Set the default gateway of the network

connected to the projector. Press to

display the software keyboard and type

in 12 numeric characters.

Checking this box will make the set de-

fault route valid. When data is sent from

the LAN card, the transfer location will

be searched according to the previously

set routing information; however, when

the transfer location has not been found

as a result of the search, the data will

be sent to the device that holds the IP

address set here. The IP address that

is set here must be one that can be iden-

tified by a search of the routing infor-

mation.

6. Using On-Screen Menu

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec wt 600 Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info