Bedienungsanleitung Nec wt 600 (Seite 70 von 71) (Englisch)

214297

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

10-6

10-6. Operation Using an HTTP

Brouther

Overview

The use of HTTP server functions will allow control of the pro-

jector from a web browser without the installation of special soft-

ware. Please be sure to use “Microsoft Internet Explorer 4.x” or

a higher version for the web browser. (This device uses

“JavaScript” and “Cookies” and the browser should be set to

accept these functions. The setting method will vary depending

on the version of browser. Please refer to the help files and the

other information provided in your software.)

NOTE:

* The use of HTTP server functions is not available during Standby

mode.

* The display’s or button’s response can be slowed down or opera-

tion may not be accepted depending the settings of your network.

Should this happen, consult your network administrator.

* The projector may not respond if its buttons are repeatedly pressed

in rapid intervals. Should this happen, wait a moment and repeat.

If you still can’t get any response, pull out and then re-insert the

LAN card.

Access is gained to the HTTP server functions by specifying

http:// <the projector’s IP address> /index.html

in the entry column of the URL.

CAUTION:

Do not use the HTTP Server functions and the Dynamic Image

Utility included on the supplied CD-ROM. Using both at the same

time may result in a connection failure or slow response.

Preparation Before Use

Make network connections and set up the projector and confirm

that it is complete before engaging in browser operations. (See

“Setting LAN Mode” on page 6-18.)

Operation with a browser that uses a proxy server may not be

possible depending on the type of proxy server and the setting

method. Although the type of proxy server will be a factor, it is

possible that items that have actually been set will not be dis-

played depending on the effectiveness of the cache, and the

contents set from the browser may not be reflected in operation.

It is recommended that a proxy server not be used unless it is

unavoidable.

Handling of the Address for Operation via a Browser

Regarding the actual address that is entered for the address or

entered to the URL column when operation of the projector is

via a browser, the host name can be used as it is when the host

name corresponding to the IP address of the projector has been

registered to the domain name server by a network administra-

tor, or the host name corresponding to the IP address of the

projector has been set in the “HOSTS” file of the computer be-

ing used.

Example 1: When the host name of the projector has

been set to “pj.nec.co.jp”,

http://pj.nec.co.jp/index.html

is specified for the address or the entry col-

umn of the URL.

Example 2: When the IP address of the projector is

“192.168.73.1”, access is gained to the

HTTP server functions by specifying

http://192.168.73.1/index.html

for the address or the entry column of the

URL.

Structure of the HTTP Server

Power: This controls the power of the projector.

On ......................... Power is switched on.

Off ......................... Power is switched off.

Volume: This controls the volume of the projector.

̆ ........................... Increments the volume adjustment

value.

̄ ........................... Decrements the volume adjustment

value.

Mute: This controls the mute function of the projector.

All On .................... Mutes each of the video, audio, and on-

screen display functions.

All Off .................... Cancels the muting of each of the video,

audio, and on-screen display functions.

Picture On ............. Mutes the video.

Picture Off ............. Cancels the video muting.

Sound On ............. Mutes the audio.

Sound Off ............. Cancels the audio muting.

OSD On ................ Mutes the on-screen display.

OSD Off ................ Cancels the muting of the on-screen dis-

play.

10. Appendix

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec wt 600 Seite 70

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info