Bedienungsanleitung Nec wt 615 (Seite 14 von 157) (Englisch)

214458

Zoom out

Zoom in

Vorherige Seite

1/157

Nächste Seite

1. Introduction

Top Features

1. POWER Button (ON / STAND BY)

Use this button to turn the power on and off when the

main power is supplied and the projector is in standby

mode.

NOTE: To turn on the projector, press and hold this button

for a minimum of two seconds. To turn off the projector,

press this button twice.

2. POWER Indicator ( )

When this indicator is green, the projector is on; when

this indicator is orange, it is in standby mode. See the

Power Indicator section on page 138 for more details.

3. STATUS Indicator

If this light blinks red rapidly, it indicates that an error

has occurred, the lamp cover is not attached properly

or the projector has overheated. If this light remains

orange, it indicates that you have pressed a cabinet

key while the Cabinet Button is locked. See the Sta-

tus Indicator section on page 138 for more details.

4. LAMP Indicator

If this light blinks red rapidly, it's warning you that the

projection lamp has exceeded 2000 hours (up to 4000

hours in Eco mode) of service. After this light appears,

replace the lamp as soon as possible. (See page 134).

If this is lit green continually, it indicates that the lamp

mode is set to Eco. See the Lamp Indicator section

on page 138 for more details.

5. SOURCE Button

Use this button to select a video source such as a PC,

VCR, DVD player or Viewer (PC card).

Press and release this button quickly to display the

Source List.

Each time this button is pressed for a minimum of ONE

second, the input source will change as follows:

Computer → DVI (DIGITAL) → DVI (ANALOG) →

Video → S-Video → Viewer → Computer → ...

If no input signal is present, the input will be skipped.

6. AUTO ADJUST Button

Use this button to adjust an RGB source for an opti-

mal picture. See page 41.

7. 3D REFORM Button

Press this button to enter 3D Reform mode to correct

the distortion, and make the image square.

Each time this button is pressed, the item will change

as follows:

Pincushion → Cornerstone → Keystone → ... (the

three items are available only when no adjustment is

made)

8. FOCUS (+) (–) Buttons

Adjusts the focus.

9. MENU Button

Displays the menu.

10. SELECT ̆̄̇̈ (+) (–) / Volume Buttons

̆̄ : Use these buttons to select the menu of the

item you wish to adjust.

̇̈ : Use these buttons to change the level of a

selected menu item. When no menus appear,

these buttons work as a volume control.

When the pointer is displayed, these ̆̄̇̈ buttons

move the pointer.

11. ENTER Button

Executes your menu selection and activates items

selected from the menu.

12. EXIT Button

Pressing this button will return to the previous menu

with saving changes.

While you are in the main menu, pressing this button

will close the menu.

13. PC CARD Access Indicator

Lights while accessing a PC card.

POWER

ENTER

SOURCE

FOCUS

PC CARD

EXIT

STATUS

LAMP

ON/

STAND BY

AUTO

ADJUST

REFORM

SELECT

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec wt 615 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info