Bedienungsanleitung Nedis ACMB1WT7 (Seite 6 von 36) (Alle Sprachen)

726083

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Quick start guide

Mobile air conditioner ACMB1WT7

For more information see the extended manual

online: ned.is/acmb1wt7

Intended use

The Nedis ACMB1WT7 is a mobile air conditioner used for cooling

and dehumidifying rooms.

This product can be used by children aged from 8 years and above

and persons with reduced physical, sensory or mental capabilities

or lack of experience and knowledge if they have been given

supervision or instruction concerning use of the product in a safe

way and understand the hazards involved. Children shall not play

with the product. Cleaning and user maintenance shall not be done

by children without supervision.

This product is intended for use in household environments for

typical housekeeping functions that may also be used by non-expert

users for typical housekeeping functions, such as: shops, oces

other similar working environments, farm houses, by clients in

hotels, motels and other residential type environments and/or in

bed and breakfast type environments.

The product is intended for indoor use only.

The product is not intended for professional use.

Any modication of the product may have consequences for safety,

warranty and proper functioning.

Specications

Product Mobile air conditioner

Article number ACMB1WT7

Dimensions 320 x 370 x 730 mm

Weight 21 kg

Input voltage AC 220 - 240 V ~ 50-60 Hz

Required power 792 W

Energy class A

Energy eciency ratio (EER) 2.6

Noise level ≤ 65 dB

Cooling capacity 7000 BTU

Room size capacity 45 m

Air circulation 300 m

Dehumidication 20 l/day

Refrigerant R290 / 130 g

Power plug Schuko CEE 7/7

Main parts (image A)



Control panel



Swing louvers



Handle



Exhaust nozzle



Exhaust hose



Window kit



Window kit adjustment

screws



Continuous drainage outlet



Air outlet



Manual drainage outlet



Power cable



Exhaust hose connector



Remote control



Exhaust nozzle screw

Safety instructions

WARNING

Contains one or more (extremely/highly)

ammable components.

• Ensure you have fully read and understood the instructions in

this document before you install or use the product. Keep this

document for future reference.

• Only use the product as described in this document.

• Do not use the product if a part is damaged or defective. Replace

a damaged or defective product immediately.

• Do not drop the product and avoid bumping.

• This product may only be serviced by a qualied technician for

maintenance to reduce the risk of electric shock.

• Do not expose the product to water or moisture.

• If the product is immersed in water, do not touch the product or

the water.

• After the product has been immersed or covered in water or

other liquids, do not use the product again.

• Make sure that the electrical supply in your area matches a

voltage of 220 – 240 VAC and a frequency of 50 Hz.

• Connect to a grounded socket only.

• If necessary, use an earthed extension cable of a suitable

diameter.

• Fully extend the power cord and make sure the power cord does

not contact the product.

• When using an extension cord, use one which is as short as

possible and fully extended.

• Do not use external timers or remote control systems to switch

the product on or o.

• Ensure people do not trip over the cord.

• Make sure that the power cable cannot become entangled and

does not hang over the edge of a worktop.

• Do not leave the product unattended when switched on.

• Keep the product away from heat sources. Do not place the

product on hot surfaces or near open ames.

• Place the product in an area without any continuous sources of

ignition (for example: open ames, gas or electrical appliances in

operation).

• Only install, operate and store the product in a room with a oor

area above 7 m

• Switch o the main power switch before unplugging the power

cord.

• Disconnect the product from the power source before service

and when replacing parts.

• Disconnect the product from the power outlet and other

equipment if problems occur.

• Always disconnect the product from the power outlet when

cleaning or moving the product.

• Do not pull the power cable to move the product.

• Shut o the main power grid and carefully remove the plug from

the power outlet.

• Close supervision is necessary when the product is used by or

near children, animals or inrm persons. Do not allow children to

play with it or touch it.

• Do not insert any objects into the product.

• Do not obstruct or cover the product’s air inlet or outlet grid.

• R290 is a refrigerant gas that complies with the European

directives on the environment.

• Be aware that refrigerants can be odorless.

• Store the product in such a way as to prevent mechanical failure.

• Only store the product in a well-ventilated area.

• When the product is installed, operated or stored in a

non-ventilated area, make sure the room is designed to prevent

the accumulation of refrigerant leaks resulting in a risk of re or

explosion due to ignition of the refrigerant caused by electric

heaters, stoves, or other sources of ignition.

• Only persons with a current valid certicate from an

industry-accredited assessment authority, which authorizes their

competence to handle refrigerants safely in accordance with an

industry recognized assessment specication, can work on or

break into a refrigerant circuit.

ACMB1WT7_MAN_COMP_0620_print_(20339 1422)_v01.indd 6 15-6-2020 10:41:05

Nedis ACMB1WT7 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info