Bedienungsanleitung Nedis DEHU10WT (Seite 4 von 44) (Alle Sprachen)

812870

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

• Do not use the product when the cable or plug is damaged.

• Make sure that the electrical supply in your area matches a

voltage of 220 – 240 VAC and a frequency of 50 Hz.

• Connect to a grounded socket only.

• If necessary, use an earthed extension cable of a suitable

diameter.

• Fully extend the power cord and make sure the power cord does

not contact the product.

• When using an extension cord, use one which is as short as

possible and fully extended.

• Do not let the power cable touch hot surfaces.

• Do not close a door on the power cable.

• Do not pull the power cable to move the product.

• Do not put any objects into openings. Do not use with any

opening blocked.

• Do not use the product without the air inlet and outlet covers in

place to avoid touching hot and moving parts that may cause

injuries.

• Do not drink water from the product. This may cause illness.

• Be aware that the refrigerants should be odourless.

• The refrigerants should be added by the manufacturer, its service

agent or similar qualied persons.

• Do not use the product in temperatures below 0˚C.

• Do not expose the product to direct sunlight or rain.

• Do not spill any water on the product.

• Do not sit on the product.

• Unplug the power cable when the product is not in use for a long

time.

• Do not unplug the product by pulling on the cable. Always grasp

the plug and pull.

• Do not block the air in- and outlets of the product.

• Only install, operate and store the product in a room with a oor

area above 4 m2.

• Only store the product in a well-ventilated area.

• Do not use external timers or remote control systems to switch

the product on or o.

• Place the product in an area without any continuous sources of

ignition (for example: open ames, gas or electrical appliances in

operation).

• When the product is installed, operated or stored in a

non-ventilated area, make sure the room is designed to prevent

the accumulation of refrigerant leaks resulting in a risk of re or

explosion due to ignition of the refrigerant caused by electric

heaters, stoves, or other sources of ignition.

• When defrosting and cleaning the product, do not use any

means other than those recommended by the manufacturing

company.

• Do not puncture or heat any part of the refrigerant circuit.

Installing the product

4Keep a minimum of 300 mm of free space around the product.

4Only move the product in the upright position.

1. Place the product on a stable and at surface.

2. Plug the power cable A5 into a power outlet.

Assembling for continuous dehumidication

(optional)

1. Remove the plug from the water hose connection A8.

2. Place the water hose A9 into A8.

3. Connect A9 to a water container or drainage system (not

included).

4Ensure that A9 is hanging down from A8, so that the water

cannot ow back into the product.

Using the control panel

Button Function

Fan speed button BqPress during the dehumidication or

ventilation mode to switch between

the high and low fan speed.

The low fan speed B2 or high fan

speed indicator LED B1 lights up.

Timer button BePress to cancel or set the duration of

dehumidication.

The timer can be set to a maximum

of 24 hours.

Press Br and Bt to set the time.

The duration is shown in hours.

When the timer function is activated,

the time indicator LED B3 lights up.

- button Br

+ button Bt

Press to set the desired humidity level

within a range of 30% to 80%.

Dehumidify mode button

Press to choose from four dierent

modes:

Automatic

Dehumidication

Dry laundry

Ventilation

Power on / standby

button Bu

Press to switch the product on or o.

Bq + BePress and hold Bq and Be for 3

seconds to activate or deactivate the

child lock function.

The child lock indicator LED Bw

lights up.

4The product might make some noise when it is used for the rst

time or after a long period when the product was not used. This

is normal and does not aect the safety of the product.

4Keep the doors and windows closed to allow the product to work

more eciently.

4The room temperature might increase during use, because the

product does not have a cooling function.

Operation modes

Automatic Automatically switches on and o to

maintain a humidity level of 55%.

Automatically switches to high fan

speed when the room humidity level

is higher than 70%.

Automatically switches to low fan

speed when the room humidity level

is between 55% and 70%.

Automatically switches to low fan

speed when the room humidity

level is lower than 55%. The

dehumidication function is disabled.

Set humidity level and fan speed are

disabled.

The automatic dehumidication

mode indicator LED B7 lights up.

Dehumidication Switch on the dehumidication and

ventilator of the product.

The humidity level and fan speed can

be set manually.

The dehumidication mode indicator

LED B6 lights up.

Dry laundry To help dry clothing and upholstery

in the room.

Set humidity level and fan speed are

disabled.

The dry laundry mode indicator LED

B8 lights up.

DEHU10WT_MAN_COMP_0522_print.indd 4DEHU10WT_MAN_COMP_0522_print.indd 4 19-5-2022 13:02:0219-5-2022 13:02:02

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nedis DEHU10WT Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info