Bedienungsanleitung Nedis HHEM300WT (Seite 7 von 64) (Alle Sprachen)

812852

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

3. Add cold or warm tap water to Ar via the hole.

4. Do not exceed the MAX indicator Aw.

5. Close Ae.

6. Place Ar into A6.

The product is delivered with a partially charged

battery. For optimal battery life, fully charge the

battery before rst use.

Using the product

4Test the water resistancy of the oor.

4This product is intended to clean dust and liquids

o waterproof hard oors such as. PVC, linoleum,

tiles and waxed parquet.

4This product is not intended to clean water-

sensitive oors such as untreated cork oors.

4Make sure the clean water reservoir Ar is lled

with water and the dirty water reservoir Ai is

installed in the product.

4Clean the oor from the inside out to avoid

leaving footprints on the freshly wiped oor.

4To avoid damaging the oor with a wet roller

brush A9, place the product into the charging

base Af when the product is not in use.

1. Clean the oor with a vacuum cleaner to remove

dust or loose particles.

2. Take the product out of Af.

3. Press the on/o button A2 to switch on the

product.

The roller brush A9 starts to rotate.

4. Press the water spray button A3.

5. Move the product back and forth until A9 is

fully wet.

6. Clean the oor by moving the product back

and forth at the same speed as using a vacuum

cleaner.

7. Press A2 to switch o the product.

8. Place the product on Af.

9. Press the self-cleaning button Ao.

A9 starts to rotate.

4The self-cleaning function removes the dirty

water from A9.

10. Empty and clean Ai. See ‘Emptying and

cleaning the dirty water reservoir’.

11. Clean A9. See ‘Cleaning the roller brush’.

• Keep cells and batteries clean and dry.

• Only use the provided charger and charging

base.

• The product is delivered with a partially charged

battery. For optimal battery life, fully charge the

battery before rst use.

• Secondary cells and batteries need to be charged

before use. Always use the correct charger and

refer to the manufacturer’s instructions or

equipment manual for proper charging

instructions.

• Do not leave a battery on prolonged charge

when not in use.

• After extended periods of storage, it may be

necessary to charge and discharge rechargeable

cells or batteries several times to obtain

maximum performance.

• Do not unplug the product by pulling on the

cable. Always grasp the plug and pull.

Installing the product

4Make sure the product is placed on a at and

stable surface.

1. Push the handle tube A4 into the body A6.

When the parts are successfully assembled, you

hear a click.

2. Place the product on the charging base Af.

3. Plug the power adapter As into a power outlet.

4. Plug the other end of As into the charging port

Ad.

4Charge the battery for at least 3.5 hours when

you use it for the rst time.

5. The battery indicator LED Ap lights up.

6. Remove As from the power outlet after

charging.

7. Leave the product on Af.

Battery indicator LEDs (image B)

4The lowest battery indicator LED Ap starts

ashing if the battery is empty.

Removing and lling the clean water

reservoir (image C)

1. Hold the handle A1 with one hand, and pull the

water reservoir handle Aq with the other hand

to remove the clean water reservoir Ar.

2. Pull out the water inlet plug Ae and rotate Ae

to one side.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nedis HHEM300WT Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info