Bedienungsanleitung Nedis HTBA10GY (Seite 5 von 28) (Alle Sprachen)

812801

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

a Quick start guide

Bathroom heater HTBA10GY

For more information see the extended manual online:

ned.is/htba10gy

Intended use

This product is a heater that allows the user to control the

surrounding temperature in the bathroom.

This product is intended for indoor use only.

This product is only suitable for well insulated spaces or occasional

use.

This product can be used by children aged from 8 years and above

and persons with reduced physical, sensory or mental capabilities

or lack of experience and knowledge if they have been given

supervision or instruction concerning use of the product in a safe

way and understand the hazards involved.

Children of less than 3 years should be kept away unless

continuously supervised.

Children aged from 3 years and less than 8 years shall only switch

on/o the product provided that it has been placed or installed in

its intended normal operating position and they have been given

supervision or instruction concerning use of the product in a safe

way and understand the hazards involved. Children aged from 3

years and less than 8 years shall not plug in, regulate and clean the

product or perform user maintenance.

Children shall not play with the product.

The product is intended for use in household environments for

typical housekeeping functions that may also be used by non-expert

users for typical housekeeping functions, such as: shops, oces

other similar working environments, farm houses, by clients in

hotels, motels and other residential type environments and/or in

bed and breakfast type environments.

This product is not suitable for primary heating purposes.

Any modication of the product may have consequences for safety,

warranty and proper functioning.

Specications

Product Bathroom Heater

Article number HTBA10GY

Dimensions (d x w x h) 100 x 560 x 160 mm

Input power 220-240 V ~ 50 Hz

Rating power 1000 - 1200 W

Waterproof IPX4

Cable length 1.4 m

Main parts (image A)

1 Bathroom heater

2 Wall mount

3 Mounting hole

4 Wall mount lid

5 Power cable

6 Screws (2x)

7 Plugs (2x)

8 Mode indicator

9 Pull cord

Safety instructions

Icon Description

To avoid overheating, do not cover the product.

Indication for a hot surface. Contact may cause

burns. Do not touch.

WARNING

• Ensure you have fully read and understood the instructions in

this document before you install or use the product. Keep the

packaging and this document for future reference.

• Only use the product as described in this document.

• Do not use the product if a part is damaged or defective. Replace

a damaged or defective product immediately.

• Do not drop the product and avoid bumping.

• This product may only be serviced by a qualied technician for

maintenance to reduce the risk of electric shock.

• Do not use this heater in the immediate surroundings of a bath, a

shower or swimming pool.

• Do not locate the product immediately below a power outlet.

• Unplug the product from the power source and other equipment

if problems occur.

• Always use the voltage (A.C. Only) marked on the rating label.

• Before cleaning and maintenance, switch o the product and

disconnect the product from the power source.

• Close supervision is necessary when the product is used by or

near children, animals or inrm persons.

• Do not use the product near explosive or ammable materials.

• Always unwind the power cable before using the product.

• Do not let the power cable touch hot surfaces.

• Only use the product in the upright position.

• Keep the air inlet grill clean.

• The power cable cannot be replaced. If the cable is damaged the

product should be scrapped.

• Disconnect the product from the power source before service

and when replacing parts.

Bathroom zones (image B)

4Never use the product while taking a shower or bath. This might

cause an electric shock.

Bathroom Shower room Suitability

0The area inside the

bath.

The area inside the

shower basin.

Not suitable

1The area is the same

width as zone 0 (the

width of the bath)

extending to 2.25 m

above the nished

oor level.

The area is 2.25 m

from the nished

oor level or the

height of the xed

shower head.

Not suitable

2The area is the same

height as zone 1 (2.25

m), extended to 0.6 m

around the bath.

The area is the same

height as zone 1,

extended to 0.6 m

around the shower

basin.

Not suitable

3Remaining space Remaining space Suitable

Installing the product (image C + D)

4Only install the product in zone 3, at least 1.8 m above the

ground and 30 cm below the ceiling.

1. Drill holes with a diameter of 8 mm and place the plugs A7.

2. Remove the wall mount lid A4 from the wall mount A2.

4The bathroom heater A1 can now rotate further than 40°.

3. Rotate A1 for better access to the mounting holes A3.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nedis HTBA10GY Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info