5
Safety instructions
-
WARNING
• Only use the product as described in this manual.
• Do not use the product if a part is damaged or defective. Replace a damaged
or defective device immediately.
• Do not drop the product and avoid bumping.
• This product may only be serviced by a qualied technician for maintenance
to reduce the risk of electric shock.
• Disconnect the product from the electrical outlet and other equipment if
problems occur.
• Do not expose the product to water or moisture.
• Do not open the product.
• If the power cable is damaged, it must be replaced by a special cable or
assembly available from the manufacturer or its service agent.
• Only use provided parts.
Installing the product
4
Make sure all the devices you want to connect have been switched o.
1. Plug the IR receiver A
9
into the IR receiver port A
8
.
4
When using multiple IR receivers A
9
, keep a distance of at least 6 meters to
avoid interference.
2. Plug the IR transmitter A
5
into an IR emitter port A
1
.
3. Place A
5
near an IR transmitter of your device.
4
Only 1 A
5
can be connected per device.
4
To avoid interference keep the distance between your device and the IR
receiver 10 m apart from each other.
Connecting the power supply
There are multiple options to connect the IR transmitter A
2
to a power supply.
Select one of the following:
• Plug a 12 VDC @ 1 A adapter into the 12 VDC power port A
3
.
IREX150AT_MAN_COMP_0420_print_(20210 1422) v02_02.indd 5 20-4-2020 08:09:44
