Bedienungsanleitung Nedis KAAFG600BK (Seite 4 von 40) (Alle Sprachen)

812814

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

• Do not let the power cable hang over the edge of a table or

counter, or touch hot surfaces.

• Do not allow this product to come in contact with curtains, wall

coverings, clothing, dishtowels or other ammable materials

during use.

• Never pour oil directly into the basket. Always use a brush to

lightly brush oil on the food when required.

• Do not leave the product unattended when switched on.

• The surfaces of the product get hot during use.

• Do not touch the hot parts of the product directly.

• The heat of the product may cause damage to the surface the

product is placed on. Always place the product on a at, stable

and heat resistant surface to prevent damage to the

surroundings of the product.

• Allow the product to cool down before cleaning and storing it.

Before rst use

1. Remove all packaging from the outside and inside of the product.

2. Clean all parts that come into contact with food with hot water

and dish soap after each use.

3. Clean the outside of the product with a soft clean, damp cloth.

4. Before rst use, perform at least one heating cycle while the

product is empty.

4When the product heats up for the rst time, it may emit slight

smoke or odour. This is normal and does not aect the safety of

the product.

Using the product

1. Place the product on a stable, at and heat resistant surface.

2. Keep the air outlet A5 at least 15 cm away from the wall.

3. Place the cooking pan A6 in the product.

4. Place the frying basket A7 or the grill plate A8 in the cooking

pan A6.

4See chapter ‘Cooking / grilling presets’ for the suggested

accessory per cooking preset.

Do not ll the inside of the basket with oil or other liquids. The

product uses hot air to cook your food.

5. Plug the power cable Aq into a power outlet.

6. Select one of the cooking / grilling presets B24. The display

B1 shows the default temperature and time of the selected

preset.

7. Press the control dial B3. The temperature on the display B1

ashes.

8. Rotate the control dial B3 to adjust the temperature.

4It is not possible to adjust the temperature when using the grill

presets B4.

9. Press the control dial B3 to conrm the temperature. The time

on the display B1 ashes.

10. Rotate the control dial B3 to adjust the cooking time.

To use the product with the probe thermometer, follow steps 11

– 19.

To use the product without the probe thermometer, follow steps

13 – 19.

If you selected the Beef preset, follow the steps in chapter ‘Grilling

beef’.

11. Plug the connector of the probe thermometer A9 into the

probe thermometer input B7.

12. Stick the probe thermometer A9 into the centre of the food.

4The display B1 shows the measured temperature.

13. Press the start button B6 to start preheating. The display B1

shows “PRE”.

4The display B1 shows “ADD” to indicate that preheating is done.

14. Use the lid handle A3 to open the lid A4. The display B1

shows “OPEN”.

15. Place the food inside the product.

16. Close the lid A4 to start the cooking process.

4To pause the preheating or cooking process, press the start

button B6.

4To stop the preheating or cooking process, press the cancel

button B5.

4The product automatically pauses the cooking process when the

lid A4 is open. The display B1 shows “OPEN”. Close the lid A4

to resume the cooking process.

4The product automatically stops when the time runs out. The

display shows “DONE’.

17. Open the lid A4.

Be careful, hot steam may escape.

4Close the lid and reset the timer and temperature if the food is

not ready yet.

Do not touch the frying basket A7 or grill plate A8 with bare

hands.

18. Remove the prepared food using a kitchen tong.

Do not use a metal tool to remove the food to avoid damaging

the coating.

19. Press the cancel button B5 to switch o the product. The

display shows “OFF’.

4The fan automatically stops after 0 – 60 seconds in standby.

Grilling beef

1. Press the “Beef’ preset.

2. Plug the connector of the probe thermometer A9 into the

probe thermometer input B7.

3. Press the control dial B3. The temperature on the display B1

ashes.

4. Rotate the control dial B3 to adjust the temperature.

4It is not possible to adjust the time when using the beef preset,

the cooking process stops automatically when the probe

thermometer A9 measures the selected meat temperature.

5. Press the control dial B3. The doneness option ashes on the

display B1.

6. Rotate the control dial B3 to select the desired doneness. The

corresponding meat temperature appears on the display B1.

7. Continue with steps 13 – 19 of “Using the product”.

4The cooking process stops automatically when you unplug the

probe thermometer.

4The cooking process stops automatically when the selected meat

temperature is not reached within one hour.

Cooking / Grilling presets B24

Presets Default

tem-

perature

(˚C)

Default

time

(min.)

Accessory

Roast 200 30 Frying basket A7 or grill

plate A8

Bake 175 30 Frying basket A7 or

cakepan (not included)

Air fry 200 20 Frying basket A7

Beef 230 12 Grill plate A8

Fish 265 7 Grill plate A8

Chicken 260 18 Frying basket A7 or grill

plate A8

Air grill (low) 200 15 Grill plate A8

Air grill

(medium)

230 15 Grill plate A8

Air grill (high) 260 15 Grill plate A8

Air grill (max) 265 10 Grill plate A8

4The cooking result of each dish depends on many variables.

The cooking time, temperature, weight and volume of the food

inuences the result.

Nedis KAAFG600BK Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info