Bedienungsanleitung Nedis PEBL140CWT (Seite 4 von 28) (Alle Sprachen)

790414

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

a Quick start guide

Electric Overblanket PEBL140CWT

For more information see the extended manual online:

ned.is/pebl140cwt

Intended use

The product is exclusively intended as an electric overblanket for

indoor use.

Any modication of the product may have consequences for safety,

warranty and proper functioning.

Main parts (image A)

1 Plug

2 Locking tab

3 Power socket

4 Temperature button

5 Time button

6 High button

7 Blanket

8 Temperature icon

9 Time icon

q Time indicator

w Temperature indicator

e Power switch

r Controller PS7G-H/L

Safety instructions

WARNING

• Ensure you have fully read and understood the instructions in

this document before you install or use the product. Keep the

packaging and this document for future reference.

• Only use the product as described in this manual.

• Ensure before use you know how the product works and how to

operate it.

• Do not use the product if a part is damaged or defective. Replace

a damaged or defective device immediately.

• This product may only be serviced by a qualied technician for

maintenance to reduce the risk of electric shock.

• Disconnect the product from the electrical outlet and other

equipment if problems occur.

• Do not drop the product and avoid bumping.

• Used only as overblanket.

• Always use the voltage (A.C. Only) marked on the rating label.

• Use only the type of controller marked on rating label.

• Always switch o the controller before you insert or remove a

plug.

• Do not expose the product to water or moisture.

• The product is not intended for medical use in hospitals.

• Do not use together with another heating appliance.

• When in use ensure the blanket and mains cord do not get

trapped.

• Children should be supervised to ensure that they do not play

with the product.

• Cleaning and user maintenance shall not be done by children

without supervision.

• The product must not be used by persons insensitive to heat and

other very vulnerable persons who are unable to react to

overheating.

• Children under the age of 3 should not use the product due to

their inability to react to overheating.

• The product is not to be used by young children over 3 years of

age, unless the controls have been pre-set by a parent or

guardian, or unless the child has been adequately instructed on

how to operate the controls safely.

• The product can be used by children aged from 8 years and

above and persons with reduced physical, sensory or mental

capabilities or lack of experience and knowledge if they have

been given supervision or instruction concerning use of the

product in a safe way and understand the hazards involved.

• The cable and control unit of the product can rise the risks of

entanglement, strangulation, tripping or treading if not correctly

arranged. Make sure that excess ties and electric cables are

arranged in a safe way.

Connecting the controller (image B)

1. Lift the locking tab A2.

2. Push the plug A1 into the power socket A3.

Removing the controller (image C)

Make sure the power switch Ae of the controller Ar is

switched to O.

1. Lift the locking tab A2.

2. Pull the plug A1 out of the power socket A3.

Do not pull the cord of the controller Ar. And do not try to pull

the plug A1 out without lifting the locking tab A2.

Preheat and use

Do not use if it is damp or wet.

4Preheat 30-60 minutes before using.

1. Connect the controller.

2. Connect the power cord to the mains.

Ensure people do not trip over the cord.

3. Switch the power switch Ae to On.

4. Press the High button A6 to set at ‘H’.

4After one hour the high temperature automatically will change to

‘L’ (Low temperature).

5. Press the Temperature button A4 to set the temperature. Select

L,1-7,H.

6. Press the Time button A5 to select the total operating time.

Select 1-9 hour.

If you go to sleep or use it for a long time, set at 'L' or 1, to avoid

overheating.

After use

1. When the blanket is not in use, switch the power switch Ae to

O.

2. Remove the plug A1 from the power socket A3.

3. Disconnect the power cord from the mains.

If you want to store the blanket for a longer period. Repeat step 1 – 3.

4. Let it cool down. Make sure the blanket is dry.

Let it dry naturally. Do not iron or dry in the sun.

5. Gently fold the blanket and place back into the packing bag.

6. Store in a cool dry place.

4Do not place items on top of it.

Specications

Product Electric Overblanket

Article number PEBL140CWT

Dimensions (l x w) 180 x 130 cm

Input voltage 220 - 240 V ~ 50 Hz

Wattage 120 Watt

Temperature settings range 25 °C - 50 °C ± 5 °C

Material Coral eece

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nedis PEBL140CWT Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info