Bedienungsanleitung Nedis SCTE7070WT (Seite 4 von 24) (Alle Sprachen)

812923

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

a Quick start guide

Telescope SCTE7070WT

For more information see the extended manual online:

ned.is/scte7070wt

Intended use

The Nedis SCTE7070WT is a telescope with a maximum focal length

of 700 mm.

This product is included with three eyepieces, an erecting lens and

a Barlow lens.

This product can be used by children aged from 6 years and above

and persons with reduced physical, sensory or mental capabilities

or lack of experience and knowledge if they have been given

supervision or instruction concerning use of the product in a safe

way and understand the hazards involved. Children shall not play

with the product. Cleaning and user maintenance shall not be done

by children without supervision.

Any modication of the product may have consequences for safety,

warranty and proper functioning.

Specications

Product Telescope

Article number SCTE7070WT

Aperture 70 mm

Objective focal length 700 mm

Max. tripod height 125 cm

Finder scope 5 x 24

Diagonal Prisms 90 °

Acceddoness 1.25"

Eyepiece Magnication Magnication

with 1.5x

erecting lens

Magnication

with 3x Barlow

lens

4 mm 175 x 263 x 525 x

12.5 mm 56 x 84 x 168 x

20 mm 35 x 53 x 105 x

Main parts (image A)

1 Eyepiece (3 lenses included)

2 Erecting lens / Barlow lens

3 Focus tube

4 Finder scope bracket

5 Finder scope

6 Bracket mounting screw

7 Bracket

8 Azimuth lock

9 Main body

q Objective lens

w Objective lens cover

e Diagonal periscope viewer

r Eyepiece attachment screw

t Focus knob

y Lens holder

u Micro adjustable altitude

control

i Tripod head

o Tripod

p Tripod leg lock

Safety instructions

WARNING

• Ensure you have fully read and understood the instructions in

this document before you install or use the product. Keep the

packaging and this document for future reference.

• Only use the product as described in this document.

• Do not use the product if a part is damaged or defective. Replace

a damaged or defective product immediately.

• Place the product on a stable and at surface.

• Do not use the product to watch the sun or any other light

source. Looking directly at the sun can cause permanent eye

damage.

• Never use your telescope to project sunlight onto another

surface, the internal heat build-up will damage the optical

elements of the telescope.

• Do not drop the product and avoid bumping.

• Do not expose the product to water or moisture.

• Children of less than 3 years should be kept away.

• This product can be used by children aged from 6 years and

above and persons with reduced physical, sensory or mental

capabilities or lack of experience and knowledge if they have

been given supervision or instruction concerning use of the

product in a safe way and understand the hazards involved.

Children shall not play with the product. Cleaning and user

maintenance shall not be done by children without supervision.

• Usage by children should be supervised at all times.

• This product may only be serviced by a qualied technician.

Installing the product

1. Unlatch the three tripod leg locks Ap and pull each of the legs

Ao out to full extension.

2. Spread Ao and lock Ap in place to secure Ao.

3. Connect the three legs Ao to the tripod head Ai using the

provided nuts and bolts.

4. Install the lens holder Ay between Ao using the provided

wingnuts and bolts.

5. Place the bracket A7 into Ai and rotate the bracket mounting

screw A6 to tighten A7.

6. Place the main body A9 in A7 and rotate the locking screws

A6 to secure A9.

7. Slide the micro adjustable altitude control Au through the hole

on the side of A7.

8. Tighten the other end of Au with the screw to A9.

9. Unscrew and remove the bolts of the nder scope bracket A4.

10. Place A4 onto A9 and tighten the bolts.

4Make sure A5 is facing the same direction as the objective lens

Aq.

11. Install the diagonal periscope viewer Ae into the focus tube

A3.

Make sure the end of Ae without the screw is inserted into

A3.

12. Place the desired eye piece A1 into Ae. Tighten the screw to

secure the eyepiece.

Only use the Barlow lens A2 without Ae to get the best

viewing results. Place the Barlow lens A2 directly into A3.

4Place one of A1 into the erecting lens or Barlow lens A2 to

increase the magnication.

Using the product

Make sure the product is placed on a at and stable surface.

Only use the erecting lens A2 to observe landscapes, not

astronomical observations.

1. Remove the objective lens cover Aw.

2. Look through the nder scope A5 to nd the target object.

• Untight the Azimuth lock A8 to change the horizontal viewing

angle of A9.

• Adjust Au to change the vertical viewing angle of A9.

3. Untighten the adjustment nuts of A5 if you do not see the

object.

4. Move A5 until you can see the object.

5. Tighten the adjustments nuts of A5 again.

6. Look through A1 to see the target object.

7. Use the focus knob At to focus on the object.

Apply small and slow adjustments for focusing.

Place Aw back on the product when not in use.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nedis SCTE7070WT Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info