Bedienungsanleitung Nedis SPBT6000BK (Seite 4 von 32) (Alle Sprachen)

726924

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

4. Select "SPBT6000" from the list of available Bluetooth devices on

your device.

lights up to indicate pairing is successful.

The speaker will switch o automatically after 45 minutes of

inactivity.

Link multiple speakers

You can link up to 100 SPBT6000BK speakers to each other.

1. Press A

on the rst speaker to switch it on.

2. Press A

to enter Link mode. A

will start blinking.

3. Press A

on the second speaker to switch it on.

4. Press A

. A

starts blinking.

When the speakers are successfully linked, A

lights up

continuously on the master speaker and the subspeaker will blink.

stops blinking after 2 minutes to indicate Link mode has

ended.

5. Repeat these steps for every speaker you want to link.

6. Connect your audio source to the master speaker to play music.

See paragraph Bluetooth pairing.

Controlling the music

1. Press A

to play or pause the music.

2. Press A

or A

to change the volume.

3. Press and hold A

for 2 seconds to skip to the next track.

4. Press and hold A

for 2 seconds to skip to the previous track.

Wired connection

1. Connect a 3.5 mm audio cable into A

and the other end to

your audio source.

lights up.

2. Start playing music.

Using a voice assistant

• Press A

twice to activate the voice assistant on your audio

source.

Using the speaker as a powerbank

• Connect a USB cable to A

and the device you want to charge.

Resetting the speaker

• Push a thin rod, like a paper clip, in A

. The speaker will reset.

Specications

Product Bluetooth® speaker

Article number SPBT6000BK

Quick start guide

Bluetooth® speaker SPBT6000BK

For more information see the extended manual

online: ned.is/spbt6000bk

Intended use

The product is exclusively intended to be used as a Bluetooth speaker.

Any modication of the product may have consequences for safety,

warranty and proper functioning.

Main parts (image A)



Bluetooth® speaker



Speaker grill



Carrying strap



AUX indicator LED



Multi-link indicator LED



Bluetooth indicator LED



Battery indicator LED



Multi-link master button



Power switch



Multi-link sub button



Volume- button



Play / pause / voice assistant



Volume+ button



Power input



Reset opening



3.5 mm input



USB power output

Safety instructions

WARNING

• Read the instructions before use.

• Only use the product as described in this manual.

• Do not use a damaged product.

• This product may only be serviced by a qualied technician for

maintenance to reduce the risk of electric shock.

Charging the product

The battery is only partially charged upon delivery. Fully charge

the battery before rst use.

1. Connect the power cable to A

and a power outlet.

2. Charge the battery for at least 6 hours when you use it for the

rst time.

Bluetooth pairing

1. Press A

to switch on the product.

2. Press A

for 2 seconds.

The speaker says: "Bluetooth pairing".

3. Enable bluetooth on the device you want to pair the speakers

with.

SPBT6000BK_MAN_COMP_(19519 1422)_V00_04.indd 4 6-9-2019 14:57:10

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nedis SPBT6000BK Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info