Bedienungsanleitung Nedis WIFIACMB1WT7 (Seite 5 von 40) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

812978

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

• If the product is immersed in water, do not touch the product or

the water.

• Shut o the main power grid and carefully remove the plug from

the power outlet.

• After the product has been immersed or covered in water or

other liquids, do not use the product again.

• Keep the product away from heat sources. Do not place the

product on hot surfaces or near open ames.

• Do not use the product near explosive or ammable materials.

• Do not insert any objects into the product.

• Do not obstruct or cover the product’s air inlet or outlet grid.

• The appliance shall be installed in accordance with national

wiring.

• Always disconnect the product from the power outlet when

cleaning or moving the product.

• Do not pull the power cable to move the product.

• Unplug the product from the power source and other equipment

if problems occur.

• Do not unplug the product by pulling on the cable. Always grasp

the plug and pull.

• Switch o the main power switch before unplugging the power

cord.

• Do not use the product when the cord or plug is damaged.

• Make sure that the electrical supply in your area matches a

voltage of 220 – 240 VAC and a frequency of 50 Hz.

• Connect to a grounded socket only.

• If necessary, use an earthed extension cable of a suitable

diameter.

• Fully extend the power cord and make sure the power cord does

not contact the product.

• When using an extension cord, use one which is as short as

possible and fully extended.

• Do not use external timers or remote control systems to switch

the product on or o.

• Ensure people do not trip over the cord.

• Make sure that the power cable cannot become entangled and

does not hang over the edge of a worktop.

• Do not leave the product unattended when switched on.

• R290 is a refrigerant gas that complies with the European

directives on the environment.

• Be aware that refrigerants can be odorless.

• Place the product in an area without any continuous sources of

ignition (for example: open ames, gas or electrical appliances in

operation).

• Only install, operate and store the product in a room with a oor

area above 7 m2.

• Only store the product in a well-ventilated area.

• Store the product in such a way as to prevent mechanical failure.

• When the product is installed, operated or stored in a

non-ventilated area, make sure the room is designed to prevent

the accumulation of refrigerant leaks resulting in a risk of re or

explosion due to ignition of the refrigerant caused by electric

heaters, stoves, or other sources of ignition.

• Only persons with a current valid certicate from an

industry-accredited assessment authority, which authorizes their

competence to handle refrigerants safely in accordance with an

industry recognized assessment specication, can work on or

break into a refrigerant circuit.

• Servicing can only be performed as recommended by the

equipment manufacturer. Maintenance and repair requiring the

assistance of other skilled personnel can only be carried out

under the supervision of the person competent in the use of

ammable refrigerants.

• When defrosting and cleaning the product, do not use any

means other than those recommended by the manufacturing

company.

• Do not puncture or heat any part of the refrigerant circuit.

• This product may only be serviced by a qualied technician for

maintenance to reduce the risk of electric shock.

Installing the product

Place the product on a stable and at surface.

Only move the product in an upright position.

Leave a minimum of 0.5 m space around the air inlet and outlet

to allow a good circulation of airow.

If the product has been tilted, allow it to stand upright for 2

hours before plugging it in.

Only install, operate and store the product in a room with a oor

area above 7 m2.

Keep the product at a distance from ammable objects such as

furniture, curtains and similar.

Do not block ventilation openings and make sure that there is

enough space around the product.

Assembling the exhaust (image C)

Only use the provided exhaust hose.

Do not block the exhaust hose, this may cause overheating.

1. Assemble the exhaust hose A5, the exhaust nozzle A4 and

the exhaust hose connector Ay.

2. Slide Ay over the air outlet Ae.

3. Extend A5 up to 1500 mm.

Do not twist the exhaust hose.

Ensure that the exhaust hose does not kink.

4. Assemble the window kit A6 with the fasteners A7.

5. Install A6 in the window opening.

6. Tighten A7.

7. Snap A4 into A6 and fasten with the exhaust nozzle screw

Ai.

4Place the product on a at and dry surface.

Assembling the continuous drainage (optional)

1. Open the continuous drainage outlet Ar.

2. Connect Ar to a water container or drainage system (not

included).

Installing the Nedis SmartLife app

1. Download the Nedis SmartLife app for Android or iOS on your

phone via Google Play or the Apple App Store.

2. Open the Nedis SmartLife app on your phone.

3. Create an account with your mobile phone number or your

e-mail address and tap Continue.

4. You will receive a verication code on your mobile phone or

e-mail address.

5. Enter the received verication code.

6. Create a password and tap Done.

7. Tap Add Home to create a SmartLife Home.

8. Set your location, choose the rooms you want to connect with

and tap Done.

Adding the product to the SmartLife app (image

1. Switch on the product.

2. Tap + in the Nedis SmartLife app.

3. Select the device type you want to add from the list.

4. Conrm the Wi-Fi indicator LED B6 is blinking fast. Or reset the

product during standby mode: Press and hold the fan speed

button B8 for 5 seconds until the product emits a tone and B6

starts blinking.

5. Follow the instructions in the Nedis SmartLife app.

4Make sure you connect the product to a 2.4 GHz Wi-Fi network.

6. Rename the product after it has been found and added.

7. After conrming you can control the product with your

smartphone.

Nedis WIFIACMB1WT7 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info