Bedienungsanleitung Nedis WIFIACMB3WT9 (Seite 5 von 44) (Alle Sprachen)

812842

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

• Do not obstruct or cover ventilation openings.

• Always disconnect the product from the power outlet when

cleaning or moving the product.

• Do not pull the power cable to move the product.

• Unplug the product from the power source and other equipment

if problems occur.

• Switch o the main power switch before unplugging the power

cord.

• Do not use the product when the cord or plug is damaged.

• Do not unplug the product by pulling on the cable. Always grasp

the plug and pull.

• Make sure that the electrical supply in your area matches a

voltage of 220 – 240 VAC and a frequency of 50 Hz.

• Connect to a grounded socket only.

• If necessary, use an earthed extension cable of a suitable

diameter.

• Fully extend the power cord and make sure the power cord does

not contact the product.

• When using an extension cord, use one which is as short as

possible and fully extended.

• Do not use external timers or remote control systems to switch

the product on or o.

• Ensure people do not trip over the cord.

• Do not leave the product unattended when switched on.

• R290 is a refrigerant gas that complies with the European

directives on the environment.

• Be aware that refrigerants can be odorless.

• Place the product in an area without any continuous sources of

ignition (for example: open ames, gas or electrical appliances in

operation).

• Keep the product at a distance from ammable objects such as

furniture, curtains and similar.

• Only install, operate and store the product in a room with a oor

area above 9 m2.

• Only use the provided exhaust hose.

• Do not block the exhaust hose. Blocking the exhaust hose may

cause overheating.

• Do not twist the exhaust hose.

• Ensure that the exhaust hose does not kink.

• Only store the product in a well-ventilated area.

• When the product is installed, operated or stored in a

non-ventilated area, make sure the room is designed to prevent

the accumulation of refrigerant leaks resulting in a risk of re or

explosion due to ignition of the refrigerant caused by electric

heaters, stoves, or other sources of ignition.

• Only persons with a current valid certicate from an

industry-accredited assessment authority, which authorizes their

competence to handle refrigerants safely in accordance with an

industry recognized assessment specication, can work on or

break into a refrigerant circuit.

• Servicing can only be performed as recommended by the

equipment manufacturer. Maintenance and repair requiring the

assistance of other skilled personnel can only be carried out

under the supervision of the person competent in the use of

ammable refrigerants.

• When defrosting and cleaning the product, do not use any

means other than those recommended by the manufacturing

company.

• Do not puncture or heat any part of the refrigerant circuit.

Installing the product

4Place the product on a stable and at surface.

4Only move the product in an upright position.

4Leave a minimum of 0.5 m free space around the air outlet and

swing louvers to allow a good circulation of airow.

4If the product has been tilted, allow it to stand upright for 2 hours

before plugging it in.

4Keep the product at a distance from ammable objects such as

furniture, curtains and similar.

4Do not block ventilation openings and make sure that there is

enough space around the product.

4Only install, operate and store the product in a room with a oor

area above 9 m2.

1. Plug the power cable Aw into the power outlet.

Assembling the exhaust (image C)

4Only use the provided exhaust hose.

4Do not block the exhaust hose. Blocking the exhaust hose may

cause overheating.

1. Assemble the exhaust hose A5, the exhaust nozzle A4 and

the exhaust hose connector Ae.

2. Slide Ae over the air outlet A9.

3. Extend A5 up to 1500 mm.

4Do not twist the exhaust hose.

4Ensure that the exhaust hose does not kink.

4. Assemble the window kit A6 with the window kit fasteners

A7.

5. Install A6 in the window opening.

6. Tighten A7.

7. Snap A4 into A6 and fasten with the exhaust nozzle screw

At.

Assembling the continuous drainage (optional)

1. Open the drainage outlet Aq.

2. Connect Aq to a water container or drainage system (not

included).

Placing the batteries in the remote control

1. Slide the battery cover o the back of the remote control Ar

2. Insert 2 type AAA batteries.

3. Slide the battery cover back in place on Ar.

Installing the Nedis SmartLife app

1. Download the Nedis Smartlife app for Android or iOS on your

phone via Google Play or the Apple App Store.

2. Open the Nedis Smartlife app on your phone.

3. Create an account with your mobile phone number or your

e-mail address and tap Continue.

4You will receive a verication code on your mobile phone or

e-mail address.

4. Enter the received verication code.

5. Create a password and tap Done.

6. Tap Add Home to create a SmartLife Home.

7. Set your location, choose the rooms you want to connect with

and tap Done.

Adding a product to the Nedis SmartLife app

1. Switch on the product.

2. Tap + in the Nedis SmartLife app.

3. Select the device type you want to add from the list.

4. Conrm the Wi-FI indicator LED B3 is blinking fast.

4If B3 is not blinking fast, press the Speed button B5 on the

product for 5 seconds during standby mode to reset the product.

5. Follow the instructions in the Nedis SmartLife app.

6. Rename the product after it has been found and added.

7. After conrming you can control the product with your

smartphone.

To connect your SmartLife account to Amazon Alexa and/ or Google

Home, set it up using the “Smart Life” action or skill. For more details

check the instruction on either Amazon or Google.

Nedis WIFIACMB3WT9 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info