Bedienungsanleitung Nedis WIFIHTPL20FWT (Seite 5 von 44) (Alle Sprachen)

726189

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

• Do not pull the power cord to shut down the

heater, always use the on/o switch.

• Do not pull the power cord to move the product.

• Fully extend the power cord and make sure the

power cord does not contact the product.

• In case of failure, shut down the heater, unplug

the power cord and have it serviced by a

qualied technician.

Movable with wheels (image C)

1. Place A

upside down.

2. Place A

on the bottom of A

Make sure the screw holes are aligned.

3. Use a screw driver to mount A

to A

4. Turn the heater upright and plug the power cord

in a grounded wall socket.

Wall mounted heater (image D)

WARNING

• Mount the product at least 150 mm from the

oor and at least 500 mm from the ceiling.

• Do not mount the product directly under a wall

socket.

• Check whether the wall can hold the weight of

the product.

• Use anchors suitable for your type of wall only.

1. Drill 2 holes, as indicated in image D.

2. Insert the anchors A

3. Insert the screws A

, let them protrude 6 mm

from the wall.

4. Hang the heater on the wall.

5. Plug the power cord in a wall socket.

The product will switch o automatically when

overheating.

Setting date and time

1. Turn on the power switch A

2. Press B

to turn on the heater.

3. Press B

to turn on the display.

4. Press B

to open the date and time setting.

5. Press B

for 3 seconds to change the time.

6. Press B

or B

to change the hour.

7. Press B

for 3 seconds.

8. Press B

or B

to change the minutes.

9. Press B

to conrm the time and exit or wait

for 5 seconds.

Setting the temperature manually

Press B5 or B8 to change the temperature.

Use the Nedis SmartLife app

You can control the product with your phone and

the Nedis SmartLife app.

1. Download the Nedis SmartLife app for Android

or iOS on your phone via Google Play or the

Apple App Store.

2. Create an account with your mobile phone

number or your e-mail address.

3. Switch on the heater using power switch A

4. Tap + in the Nedis SmartLife app.

5. Select the device type you want to add from the list.

6. Conrm the indicator LED B

is blinking fast, or hold

the + button B

for 5 seconds to reset the heater.

7. Follow the instructions in the Nedis SmartLife app.

Make sure you connect the product to a 2.4 GHz

Wi-Fi network.

8. After adding the product, you can rename it and

assign it to a room. After conrming you can

control the heater with your smart phone.

For more information about how the app works,

consult the extended manual online.

To connect your SmartLife account to Amazon Alexa

and/or Google Home, set it up using the “Smart Life”

action or skill. For more details check the instruction

on either Amazon or Google.

Specications

Product Panel convection heater

Article number WIFIHTPL20FWT

Dimensions (l x w x h) 830 x 260 x 520 mm

(with wheels)

830 x 90 x 465 mm (wall

mounted)

Weight 7.9 kg

Input voltage AC 220 - 240 V ~ 50

/ 60 Hz

Rated input power 1800 - 2000 W

Setting 1000 W / 2000 W

Overheating protection

temperature

105 °C

IP rating IP24

WIFIHTPL20FWT_MAN_COMP_0919_(19350 1422)_v02.indd 5 30-8-2019 12:25:27

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nedis WIFIHTPL20FWT Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info