Bedienungsanleitung Neff B12M22N3 (Seite 18 von 24) (Englisch)

634010

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Removing the door panel

Note: Before removing, make a note of which way round the

door panel is fitted, so that it is not refitted the wrong way

round.

1.Unhook the appliance door and lay it on a soft, clean surface

with the front side facing downwards (see section: Removing

and fitting the appliance door).

2.Pull off the cover at the top of the appliance door. Press in

the tabs on the left and right using your fingers (fig. A).

3.Lift the door panel and pull it out (figure B).

Cleaning

Clean the door panel with glass cleaner and a soft cloth.

: Risk of injury!

Scratched glass in the appliance door may develop into a

crack. Do not use a glass scraper, or sharp or abrasive

cleaning aids or detergents.

Fitting the door panel

1.Insert the door panel at an angle towards the back into both

brackets as far as it will go. The smooth surface must face

outwards.

2.Put the cover back in place and press on it until it clicks in

place.

3.Refit the appliance door.

Cleaning the hook-in racks

You can remove the hook-in racks for easier cleaning.

: Risk of burning due to hot components in the cooking

compartment!

Wait until the cooking compartment has cooled down.

1.Push the hook-in rack upwards at the front and unhook to the

side (figure A).

2.Pull the hook-in rack forwards at the rear and unhook to the

side (figure B).

3.Clean the hook-in rack with washing-up liquid and a sponge

or brush.

4.Align the hook-in rack with the indentation (a) facing

downwards, so that the shelf heights match.

5.Insert the hook-in rack at the rear as far as it will go and push

to the rear (figure C).

6.Insert the hook-in rack at the front as far as it will go and push

downwards (figure D).

Faults and repairs

It is not always necessary to call the after-sales service.

Sometimes, you can find a remedy yourself. You will find some

tips for troubleshooting in the following table.

: Risk of electric shock!

■ Work on the appliance electronics may only be performed by

a specialist.

■ Always disconnect the appliance from the power supply

when work is carried out on the electronics. Switch off the

circuit breaker or remove the fuse from your household fuse

box.

$ %

& '

Problem Possible cause Remedial action

Electrical function is faulty (e.g. indicator

lamps do not light up)

Circuit-breaker faulty Check circuit-breakers in the fuse box and

replace if necessary

Liquid or thin dough runs to one side Appliance not installed level Check the appliance installation (see the

Installation instructions)

Smoke is generated during roasting or grill-

ing

Fat is burning on the grill element Continue grilling or roasting until the fat on

the grill element is burnt away

Wire rack or universal pan inserted incor-

rectly

Check the shelf levels (see section: Roast-

ing or Grilling)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Neff B12M22N3 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Neff B12M22N3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info