Bedienungsanleitung Neff B14M42N3 (Seite 10 von 28) (Englisch)

540259

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Once the cooking time has elapsed, the appliance switches off

automatically.

1.Turn the operating mode and temperature selector back to

the

Û position.

2.Press the KJ clock function button to exit the clock function.

End of operation

Automatic switch-off at a set time.

1.Set the operating mode and temperature.

The appliance heats up.

2.Press the KJclock function button repeatedly until the KJ

and

y symbols light up.

3.Set the end of operation using the rotary selector

(e.g.

‚ƒ:„‹ o'clock).

The setting is applied automatically. The clock is then

displayed again.

The appliance switches off automatically at the time set for the

end of operation.

1.Turn the operating mode and temperature selector back to

the

Û position.

2.Press the KJ clock function button to exit the clock function.

Preset operation

The appliance switches on automatically, then switches off

automatically at the time preselected for the end of operation.

To set this function, combine the cooking time and end of

operation clock functions.

Bear in mind that food which spoils easily should not be left in

the cooking compartment for too long.

1.Set the operating mode and temperature.

The appliance heats up.

2.Press the KJclock function button repeatedly until

the

KJand x symbols light up.

3.Set the cooking time with the rotary selector

(e.g.

‚:„‹ hours).

The setting is applied automatically.

4.Press the KJclock function button repeatedly until

the

KJand y symbols light up.

5.Set the end of operation using the rotary selector

(e.g.

‚ƒ:„‹ o'clock).

The appliance switches off and waits until the appropriate

time to switch on (

‚‚:‹‹ in the example). The appliance

switches off automatically at the time set for the end of

operation (

‚ƒ:„‹ ).

6.Turn the operating mode and temperature selector back to

the

Û position.

7.Press the KJ clock function button to exit the clock function.

Setting the clock

You can only change the clock when no other clock function is

active.

1.Press the KJ clock function button repeatedly until

the

KJand 3 symbols light up.

2.Set the clock using the rotary selector.

The setting is applied automatically.

Rapid heat up

With 3 CircoTherm®, you can shorten the heat up time if your

selected temperature setting is higher than 100 °C.

Note: During Rapid heat up, do not place any food in the

cooking compartment for as long as the

f symbol is lit.

1.Set the operating mode and temperature.

The appliance heats up.

2.Press the KJ clock function button repeatedly until the KJ

and

f symbols light up and Œ appears in the clock display.

3.Turn the rotary selector clockwise.

In the clock display,

Ž is displayed and the f symbol lights

up. Rapid heat up is activated.

After reaching the set temperature, Rapid heat up switches off.

The

f symbol goes out.

Checking, correcting or deleting settings

1.To check your settings, press the KJ clock function button

repeatedly until the corresponding symbol lights up.

2.If necessary, you can correct your setting using the rotary

selector.

3.If you wish to cancel your setting, turn the rotary selector anti-

clockwise to the original value.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Neff B14M42N3 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Neff B14M42N3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info