Bedienungsanleitung Neff B17CR22N1 (Seite 13 von 52) (Englisch)

621408

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Operating the appliance en

1Operating the appliance

Operating the appliance

You have already learnt about the controls and how

they work. Now we will explain how to set your

appliance. You will learn about what happens when you

switch the appliance on and off, and how to select the

operating mode.

Switching the appliance on and off

Touch the # touch button to switch the appliance on or

off.

After switching off the appliance, on the display you can

see if the residual heat in the cooking compartment is

high or low.

Notes

■ Certain displays and notes, such as the residual heat

in the cooking compartment, remain visible on the

display even when the appliance is switched off.

■ After an appliance operation, the cooling fan runs on

audibly until the cooking compartment has been

cooled as far as possible.

■ Switch off your device when you do not need to use

it. If no settings are applied for a long time, the

appliance switches itself off automatically.

Setting and starting the appliance operation

Example: CircoTherm hot air ‚ at 170 °C

1. Touch the # touch button to switch on the

appliance.

You are taken directly to the ¢ menu for the types of

heating.

2. Use the ( or ) button to select the type of heating.

3. Use the & button to navigate to the next line.

4. Use the ( or ) button to select the temperature.

Note: Depending on the operating mode, different

settings are available. For each further setting, use

the & button to navigate to the next line. Use the (

or ) button to select the setting.

5. Touch the # touch button to start the appliance

operation.

The heating bar and run time appear on the display.

Note: If you would like to go directly to the 0 main

menu after switching on the appliance, you can select

the main menu under "Operation after switching on" in

the basic settings chapter. ~ "Basic settings"

on page 17

Default values

The appliance suggests a temperature or setting for

each type of heating. You can accept this value or

change it in the appropriate area.

Heating bar

As soon as a type of heating has started, the heating

bar appears on the display.The heating bar shows the

temperature increase in the cooking compartment.

Run time

When a type of heating has been started, the run time is

displayed. The run time counts upwards during the

operation. You can therefore check how long the

operation has already been running.

Displaying the current temperature

To show the current temperature on the display, press

the ! touch button.

The current temperature is shown briefly only when

heating up.

Further information

If the ! touch button lights up, information can be

displayed. Touch the ! touch button to do this. The

information is displayed for a few seconds.

Changing or cancelling the appliance

operation

Changing the appliance operation

1. Use the # button to stop the operation.

2. Use the & or % button to navigate to the line for the

setting that should be changed.

3. Use the ( or ) button to change the setting.

4. Use the # touch button to start the changed

operation.

Display Meaning

-H- Residual heat high (above 120 °C)

-h- Residual heat low (between 60 °C and 120 °C)

&LUFR7KHUPKRWDLU



&

&LUFR7KHUPKRWDLU



&

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Neff B17CR22N1 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Neff B17CR22N1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info